{"title":"Peugeot 308 airbag control unit repair","description":"\u003ch2\u003e What should I pay attention to with Peugeot 308 airbag control units?\u003c\/h2\u003e  \u003cp\u003e\u003cstrong\u003eThe airbag technology used in the Peugeot 308 varies depending on the model year and trim level. Airbag24 professionally repairs control units for all Peugeot 308 generations with original functionality and a 2-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e The Peugeot 308, a representative of the compact class, has evolved over several generations, with each series bringing new advancements in safety systems. From the Peugeot 308 I (2007-2013) to the 308 II (2013-2021) to the current 308 III (since 2021), the airbag control units reflect technological changes.\u003c\/p\u003e\n\u003cp\u003e A defective airbag control unit in a Peugeot 308 can impair the function of the entire safety system, which is often indicated by an illuminated airbag warning light. A professional repair is essential to restore full functionality and thus the safety of the occupants.\u003c\/p\u003e  \u003cp\u003eThe specific requirements for repairing a Peugeot 308 airbag control unit depend heavily on the model year and the installed hardware. Modern control units manage a larger number of airbags and sensors, requiring precise diagnostics and expert repair expertise.\u003c\/p\u003e\n\u003ch2\u003e Which Peugeot 308 generations are there?\u003c\/h2\u003e\n\u003cp\u003e \u003cstrong\u003eThe Peugeot 308 has been produced in three main generations, each using different airbag control units. The evolution of the safety system reflects technological advances from 2007 to the present.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e The first generation, the Peugeot 308 I, was produced from September 2007 to 2013. It was available as a hatchback (3- and 5-door), a station wagon, and a coupe-cabriolet (308 CC). During this period, the foundations were laid for the airbag systems, which continued to evolve in subsequent generations.\u003c\/p\u003e  \u003cp\u003eThe Peugeot 308 II followed in 2013 and was produced until 2021, with a facelift in 2017. This generation was available as a hatchback and station wagon and already featured further developments in passive safety systems. These often featured advanced control units that managed more sensors and airbags.\u003c\/p\u003e\n\u003cp\u003e The Peugeot 308 III has been available since 2021, also as a hatchback and station wagon, and since 2022 also as a plug-in hybrid (e-308). The third generation integrates the latest safety technologies, which is also reflected in the highly complex airbag control units, which must ensure a quick and reliable response in the event of an accident.\u003c\/p\u003e\n\u003ch2\u003e How do I identify my Peugeot 308 airbag control unit?\u003c\/h2\u003e  \u003cp\u003e\u003cstrong\u003ePeugeot 308 airbag control units can be uniquely identified by part number, year of manufacture, and vehicle identification number (VIN). Each generation uses specific control unit variants for optimal compatibility and functional reliability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Precisely identifying your Peugeot 308 airbag control unit is crucial for a successful repair. The part number, usually located directly on the control unit's housing, is the most important clue. It provides information about the module's exact specifications and compatibility.\u003c\/p\u003e\n\u003cp\u003e The year of manufacture and the vehicle identification number (VIN) of your Peugeot 308 also help determine the correct version of the airbag control unit. Within the same generation, different revisions of the control units may have been installed due to facelifts or model updates.\u003c\/p\u003e  \u003cp\u003eThe airbag control unit in the Peugeot 308 is often installed centrally in the vehicle, typically under the center console or under one of the front seats. In most cases, removing the unit is necessary to read the part number.\u003c\/p\u003e\n\u003ch2\u003e What airbag equipment does the Peugeot 308 have?\u003c\/h2\u003e\n\u003cp\u003e \u003cstrong\u003eThe airbag configuration of the Peugeot 308 varies considerably depending on the model year and trim level. While early models use basic airbag systems, newer generations feature enhanced safety packages with additional airbag modules and intelligent assistants.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e The Peugeot 308 I (2007-2013) already offered a solid basic passive safety package. Four to six airbags were typically installed as standard, including driver and passenger front airbags (often with a deactivation function for the passenger), as well as front side or curtain airbags. ABS with EBD and EBA was also standard.\u003c\/p\u003e  \u003cp\u003eWith the Peugeot 308 II (2013-2021), airbag equipment was further developed. These typically featured six or more airbags, including curtain airbags for the front and rear rows. Systems such as ESP, automatic door locking, and ISOFIX anchorages were also standard. Higher trim levels such as the Allure or GT could offer additional airbags or enhanced safety packages.\u003c\/p\u003e\n\u003cp\u003e The current Peugeot 308 III (since 2021) continues this trend and offers comprehensive passive and active safety systems. In addition to the standard six or more airbags (front, side, and curtain), intelligent driver assistance systems are often integrated, which, in conjunction with the airbag control unit, further enhance safety, such as pre-crash systems or automatic emergency braking. Repairing these complex control units requires specialized knowledge of the interconnectedness of all safety components.\u003c\/p\u003e","products":[{"product_id":"peugeot-308-i-airbag-steuergeraet-reparatur","title":"Peugeot 308 I airbag control unit repair","description":"\u003ch2\u003e What is a Peugeot 308 I airbag control unit?\u003c\/h2\u003e\n\n \u003cp\u003e\u003cstrong\u003eThe Peugeot 308 I airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It continuously monitors sensors in the vehicle, stores critical crash data, and ensures the proper functioning of all airbag modules and seatbelt pretensioners to provide maximum protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e This electronic control unit is crucial for detecting collisions and quickly triggering the passive safety systems in the Peugeot 308 I.\u003c\/p\u003e\n\n\u003cp\u003e It ensures that airbags and seat belt pretensioners function reliably in an emergency, making it an essential component for vehicle safety.\u003c\/p\u003e\n\n\n\u003ch3\u003e Why is the Peugeot 308 I airbag control unit defective?\u003c\/h3\u003e\n\n \u003cp\u003e\u003cstrong\u003eThe Peugeot 308 I airbag control unit is often reported as \"defective\" because it stores crash data after an accident and then becomes locked, even if it is mechanically intact. Electrical faults, such as short circuits or power supply problems, can also cause a failure and activate the airbag warning light, necessitating a professional Peugeot 308 I airbag control unit repair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e After a crash, the control unit stores indelible data that prevents its reuse without a specialized Peugeot 308 I airbag control unit repair.\u003c\/p\u003e\n\n\u003cp\u003e Other causes of failure can include internal electronic defects, water damage, or faulty communication with other vehicle systems.\u003c\/p\u003e\n\n\u003cp\u003e A failure typically results in the airbag warning light remaining permanently illuminated and the system being deactivated for the safety of the occupants.\u003c\/p\u003e\n\n\n\u003ch3\u003e Common error codes for Peugeot 308 I airbag control unit repair\u003c\/h3\u003e\n\n \u003cp\u003e\u003cstrong\u003eWhen diagnosing a Peugeot 308 I airbag control unit repair, specific error codes often occur that indicate the airbag deployment status or communication problems with the control unit. These codes are crucial for identifying the exact cause of a malfunction and initiating the necessary steps to restore the safety systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e 1712 → Front left + right airbag triggered → Crash event stored in the control unit\u003c\/li\u003e\n\n\u003cli\u003e 1728 → Driver's side airbag triggered → Crash event stored in the control unit\u003c\/li\u003e\n\n\u003cli\u003e 1730 → Left head airbag triggered → Crash event stored in the control unit\u003c\/li\u003e\n\n\u003cli\u003e B1000 → Control unit communication error → Data connection fault or internal defect\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch3\u003e What part numbers are available for the Peugeot 308 I airbag control unit repair?\u003c\/h3\u003e\n\n \u003cp\u003e\u003cstrong\u003eFor a successful Peugeot 308 I airbag control unit repair or replacement, exact OEM part numbers are essential to ensure compatibility with your vehicle model. Multiple verified original numbers for the Peugeot 308 I airbag control unit include 9674291480, 624926000, 9665100080, and 96 651 001 80.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e These numbers are directly assigned to the manufacturers Peugeot\/PSA and the supplier Autoliv and ensure original quality.\u003c\/p\u003e\n\n\u003cp\u003e In particular, the number 9674291480 is widely used as an official PSA original number and is confirmed for various 308 I models.\u003c\/p\u003e\n\n\u003cp\u003e The correct identification of the part number is crucial to avoid incorrect deliveries and to enable a reliable Peugeot 308 I airbag control unit repair.\u003c\/p\u003e","brand":"Airbag-24","offers":[{"title":"Delete crash data","offer_id":53125652119884,"sku":null,"price":159.0,"currency_code":"EUR","in_stock":true},{"title":"Control unit defective","offer_id":53125652218188,"sku":null,"price":275.0,"currency_code":"EUR","in_stock":true},{"title":"Überprüfung auf Fehler","offer_id":53509500731724,"sku":null,"price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/6446\/6508\/files\/79NZn_GNSM1fixwcGD9AWYYSjTkUYRJhDBlzi00fC5k_379368c8-ed97-48f5-bedc-53416e9fb0e9.webp?v=1779803586"},{"product_id":"peugeot-308-ii-airbag-steuergeraet-reparatur","title":"Peugeot 308 II airbag control unit repair","description":"\u003ch2\u003e What is a Peugeot 308 II airbag control unit?\u003c\/h2\u003e\n\n\u003cp\u003e \u003cstrong\u003eThe Peugeot 308 II airbag control unit is the central safety unit in the vehicle, evaluating critical data from sensors in the event of an accident. It precisely controls the deployment of all occupant restraint systems, such as airbags and seatbelt pretensioners, to ensure maximum protection, while storing important crash data for diagnostic purposes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e This module is crucial for the passive safety system of your Peugeot 308 II and continuously monitors the vehicle's condition.\u003c\/p\u003e\n\n \u003cp\u003eIt processes signals from various crash and side impact sensors distributed throughout the vehicle to detect accident situations in milliseconds.\u003c\/p\u003e\n\n\n\u003ch3\u003e Why is the Peugeot 308 II airbag control unit defective?\u003c\/h3\u003e\n\n\u003cp\u003e \u003cstrong\u003eA Peugeot 308 II airbag control unit is often defective because it stores crash data after an accident and then locks itself, causing the airbag warning light to remain permanently illuminated. This requires a professional Peugeot 308 II airbag control unit repair, as otherwise the system will no longer function.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e After a collision in which airbags or seat belt pretensioners are deployed, the control unit stores these events as \"crash data\".\u003c\/p\u003e\n\n\u003cp\u003e This results in the system being locked, even if there is no physical damage to the control unit itself, preventing further use of the security system.\u003c\/p\u003e\n\n \u003cp\u003eEven without an accident, a failure can occur due to internal electronic errors, overvoltage or moisture damage, which make a diagnosis and subsequent Peugeot 308 II airbag control unit repair necessary.\u003c\/p\u003e\n\n\n\u003ch3\u003e Common error codes for Peugeot 308 II airbag control unit repair\u003c\/h3\u003e\n\n\u003cp\u003e \u003cstrong\u003eA defective Peugeot 308 II airbag control unit will produce specific error codes that indicate airbag module deployment and require a crash data reset. These codes are crucial for accurate diagnosis and subsequent Peugeot 308 II airbag control unit repair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003e1712\u003c\/strong\u003e → Front left + right airbag triggered → Crash data stored in the control unit\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003e1728\u003c\/strong\u003e → Driver's side airbag triggered → Crash data stored in the control unit\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003e1730\u003c\/strong\u003e → Left head airbag triggered → Crash data stored in the control unit\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n \u003cp\u003eThese error codes usually indicate that the airbag control unit has completed its function after an impact and is now locked.\u003c\/p\u003e\n\n\u003cp\u003e Clearing these specific trouble codes is a key step in restoring the airbag system to operational status.\u003c\/p\u003e\n\n\n\u003ch3\u003e What part numbers are available for the Peugeot 308 II airbag control unit repair?\u003c\/h3\u003e\n\n\u003cp\u003e \u003cstrong\u003eFor Peugeot 308 II airbag control unit repairs, the original OEM part numbers 9807568180 and 624926000 are primarily relevant, as these have been confirmed to be specifically designed for the Peugeot 308 II airbag control unit. Precise part number matching is crucial for compatibility and a successful repair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e Part number \u003cstrong\u003e9807568180\u003c\/strong\u003e is a frequently listed OEM number from PSA (Peugeot\/Citroën) for this control unit.\u003c\/p\u003e\n\n\u003cp\u003e Also confirmed is the OEM part number \u003cstrong\u003e624926000\u003c\/strong\u003e , which also comes from PSA and is used for the Peugeot 308 II.\u003c\/p\u003e\n\n \u003cp\u003eThese numbers guarantee the originality and the exact fit for your vehicle model, which is essential when purchasing spare parts or repairing the Peugeot 308 II airbag control unit.\u003c\/p\u003e\n\n\n\u003ch3\u003e Compatibility and installation of the Peugeot 308 II airbag control unit\u003c\/h3\u003e\n\n\u003cp\u003e \u003cstrong\u003eThe Peugeot 308 II airbag control unit is compatible with all Peugeot 308 II model variants (model years 2013-2021), including hatchbacks and station wagons (SW), and is typically mounted in a protected location in the center console or under the dashboard. Installation is achieved via special, color-coded connectors that ensure a secure and error-free connection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e It is designed for the front-wheel drive of the Peugeot 308 II series (LB_, LP_, LW_, LH_) and covers a wide range of engines, such as diesel engines with 120 hp \/ 88 kW.\u003c\/p\u003e\n\n\u003cp\u003e Installation is done via characteristic yellow airbag connectors, which are specially coded to avoid confusion with other systems.\u003c\/p\u003e\n\n \u003cp\u003eThese plugs have safety clips that short-circuit the circuit when pulled out to prevent accidental activation and are equipped with mechanical locks.\u003c\/p\u003e\n\n\n\u003ch3\u003e Peugeot 308 II airbag control unit repair: Your advantages\u003c\/h3\u003e\n\n\u003cp\u003e \u003cstrong\u003eRepairing the Peugeot 308 II airbag control unit offers significant advantages over purchasing a new one, as it is generally significantly more cost-effective and faster, while restoring the system's full functionality. A professional repair allows for the erasure of crash data and immediate reactivation of the safety system.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e The repair allows locked control units to be unlocked and error codes to be cleared without having to replace the entire module at great expense.\u003c\/p\u003e\n\n\u003cp\u003e This not only saves costs but also reduces the ecological footprint by reusing an existing component.\u003c\/p\u003e\n\n \u003cp\u003eOnly specially trained personnel should carry out work on the airbag control unit, as it is a safety-relevant component and diagnosis and repair require specialized knowledge.\u003c\/p\u003e\n\n\u003cp\u003e The repair ensures that your airbag system is fully functional in the event of another accident and that you can drive safely without the warning light signaling a failure.\u003c\/p\u003e\n\n","brand":"Airbag-24","offers":[{"title":"Delete crash data","offer_id":53125652382028,"sku":null,"price":159.0,"currency_code":"EUR","in_stock":true},{"title":"Control unit defective","offer_id":53125652775244,"sku":null,"price":275.0,"currency_code":"EUR","in_stock":true},{"title":"Überprüfung auf Fehler","offer_id":53509500764492,"sku":null,"price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/6446\/6508\/files\/79NZn_GNSM1fixwcGD9AWYYSjTkUYRJhDBlzi00fC5k_a49ce34f-0d27-4211-8256-8ecc4104b19a.webp?v=1779803668"},{"product_id":"peugeot-308-iii-airbag-steuergeraet-reparatur","title":"Peugeot 308 III P51 airbag control unit repair","description":"\u003ch2\u003e What is a Peugeot 308 III airbag control unit?\u003c\/h2\u003e\n\n\u003cp\u003e \u003cstrong\u003eThe Peugeot 308 III airbag control unit is the central safety unit in the vehicle, controlling the activation of all airbags and seatbelt pretensioners in the event of a collision. It receives data from crash sensors, immediately analyzes it, and stores accident-relevant information, which is essential for diagnosis and professional Peugeot 308 III airbag control unit repair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e This essential component continuously monitors the status of the entire occupant protection system and signals malfunctions via the airbag warning light in the dashboard. It ensures that the safety mechanisms function reliably in an emergency.\u003c\/p\u003e\n\n \u003cp\u003eIts function is critical for occupant safety, as it calculates precise timing and strengths for the activation of the restraint systems. Professional inspection or repair is essential in the event of defects.\u003c\/p\u003e\n\n\n\u003ch3\u003e Why is the Peugeot 308 III airbag control unit defective?\u003c\/h3\u003e\n\n\u003cp\u003e \u003cstrong\u003eA Peugeot 308 III airbag control unit often malfunctions after an accident because it stores specific crash data that prevents continued operation without a professional reset. Internal hardware defects, power surges, or communication problems can also lead to failure, necessitating a prompt Peugeot 308 III airbag control unit repair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e After a collision, the control unit stores indelible crash data that, for safety reasons, prevents the airbags from re-deploying. This data must be erased by specialists to make the device usable again.\u003c\/p\u003e\n\n \u003cp\u003eA faulty control unit can also be caused by internal electronic defects, moisture ingress, or age-related wear and tear. Such failures are often indicated by a permanently illuminated airbag warning light.\u003c\/p\u003e\n\n\u003cp\u003e Communication errors with other vehicle systems or sensors are also common causes of a diagnosed defect. In these cases, a comprehensive diagnosis at a specialist workshop is crucial before initiating repairs.\u003c\/p\u003e\n\n\n\u003ch3\u003e Common error codes for Peugeot 308 III airbag control unit repair\u003c\/h3\u003e\n\n\u003cp\u003e \u003cstrong\u003eDuring Peugeot 308 III airbag control unit repairs, specific error codes may occur, indicating deployed airbags or communication problems. These codes, such as 1712 or B1000, are crucial for diagnosis and indicate whether crash data is stored in memory or whether there is a system failure that needs to be addressed.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n \u003cli\u003e1712 → Driver and passenger side airbags deployed → Crash data is stored in the control unit after an impact.\u003c\/li\u003e\n\n\u003cli\u003e 1728 → Driver side airbag deployed → This code indicates that the driver side airbag has been deployed.\u003c\/li\u003e\n\n\u003cli\u003e 1730 → Left head airbag triggered → The error code confirms the activation of the left head airbag in the event of an accident.\u003c\/li\u003e\n\n\u003cli\u003e B1000 → Control unit communication error → There is a fault in the data transmission between the airbag control unit and other modules.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e Reading these error codes is the first step in any professional diagnosis and allows for precise identification of the problem. Only specialized workshops can correctly interpret and clear these codes.\u003c\/p\u003e\n\n \u003cp\u003eMost of these codes indicate \"crash data stored,\" which requires a reset of the control unit to restore full functionality. Accurate error reading is essential for a successful Peugeot 308 III airbag control unit repair.\u003c\/p\u003e\n\n\n\u003ch3\u003e What part numbers are available for the Peugeot 308 III airbag control unit repair?\u003c\/h3\u003e\n\n\u003cp\u003e \u003cstrong\u003eFor Peugeot 308 III airbag control unit repairs, several verified OEM part numbers from original manufacturers such as PSA and Bosch are relevant. These exact numbers are crucial to ensure 100% compatibility and safety of the replacement part and to avoid malfunctions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003cp\u003e The exact part number of the airbag control unit is absolutely crucial for a successful repair or replacement. An incorrect number can lead to compatibility issues or system failure.\u003c\/p\u003e\n\n\u003cp\u003e Here are the primary OEM part numbers relevant to the Peugeot 308 III airbag control unit:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003e624926000:\u003c\/strong\u003e A common original part number from Peugeot (PSA) \/ Bosch, validated for the 308 III.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003e9674291480:\u003c\/strong\u003e Often listed in combination with 619763800, relevant for various 308 SW III variants.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003e9665100080:\u003c\/strong\u003e Listed as an OEM spare part for various Peugeot 308 III engines.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003e9807568180:\u003c\/strong\u003e This number is also relevant for the 308 III and is sometimes compared with 624926000.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e It is essential to accurately match the part number of the defective control unit to ensure the correct function of the airbag system after the Peugeot 308 III airbag control unit repair. Always ensure validation from trusted sources.\u003c\/p\u003e","brand":"Airbag-24","offers":[{"title":"Delete crash data","offer_id":53125653266764,"sku":null,"price":159.0,"currency_code":"EUR","in_stock":true},{"title":"Control unit defective","offer_id":53125653299532,"sku":null,"price":275.0,"currency_code":"EUR","in_stock":true},{"title":"Überprüfung auf Fehler","offer_id":53509500830028,"sku":null,"price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/6446\/6508\/files\/XzulOfjS-qeL_pJY6qb6i4LiK-BkkZSpi-9swUogh2s.png?v=1779803771"}],"url":"https:\/\/www.airbag24.de\/en\/collections\/peugeot-308-airbag-steuergeraet-reparatur.oembed","provider":"Airbag24","version":"1.0","type":"link"}