Ferrari Amalfi airbag control unit repair⁽¹⁾

What should be considered with Ferrari Amalfi airbag control units?

The airbag control unit in the Ferrari Amalfi evaluates the signals from the crash sensors, triggers the airbags and belt tensioners in a crash and monitors the entire system. If it detects a fault, the airbag warning light comes on. After an accident it stores crash data and locks itself.

Based on the crash sensors, the control unit decides whether and when the airbags and belt tensioners are triggered. It also monitors the connections to the other components of the system and reports faults via the airbag warning light.

The crash data is erased during the repair. After an accident, the system should be checked by a specialist workshop.

Airbag24 repairs the airbag control unit from your vehicle that you send in. Whether a specific fault can be repaired is only determined by testing the unit. Work on the airbag system is safety-critical and should be left to a specialist.

Which Ferrari Amalfi generations are there?

The Ferrari Amalfi has been built since 2025. For the repair, the series in which the vehicle was built is the most important factor, as airbag control units can differ between series.

The series at a glance:

• Amalfi (since 2025) – current series, production is still ongoing

Vehicles from model year 2025 onwards belong to this series. The model year is therefore the first point of reference when you want to assign your vehicle.

How do I identify my Ferrari Amalfi airbag control unit?

You can identify the control unit by the part number on the label, the model year and the vehicle identification number (VIN). The part number specifies the exact version of the unit and is therefore the most important point of reference.

The part number on the label of the control unit determines which version is fitted. Note it down before removal, together with the model year and the VIN of your vehicle. The model year and equipment help narrow down the version, as the vehicle may have different safety components depending on its equipment.

The fault memory shows which messages the system has stored. Examples are:

• Code 01: control unit faulty (internal fault)
• Code 06: battery voltage too low

A single code alone does not prove a defect. Only testing the unit shows whether a fault is present and which component is affected.

What airbag equipment does the Ferrari Amalfi have?

The exact airbag equipment of the Ferrari Amalfi depends on the market and trim level. Binding details can be found in the vehicle data sheet or from a Ferrari partner.

Vehicles in this class usually have front, side and head airbags fitted, which protect the occupants in a crash. The number and arrangement of the airbags vary by version, so a statement without vehicle data is not reliable. Ferrari also lists driver assistance systems for the Amalfi, including automatic emergency braking, lane keeping assist and blind spot detection. They complement the airbag protection but do not take over its function.

If the airbag warning light is illuminated or the system has locked itself after an accident, have the fault memory read out, the battery disconnected and the control unit removed. You then create a repair order online and send the unit in. Processing usually takes 3–4 working days: we check, repair and test the control unit. The repaired control unit returns with all vehicle data and is ready for use immediately after refitting — no coding or programming is required.