German specialistFree standard shippingFast delivery20,000+ repairs · 10,000+ reviews
Airbag24
Ferrari SF90 XX Stradale airbag control unit repair

Ferrari SF90 XX Stradale airbag control unit repair(1)

What should be considered with Ferrari SF90 XX Stradale airbag control units?

The airbag control unit evaluates the crash sensors, triggers the airbags and belt tensioners in a crash, and monitors the entire system. If it detects a fault, the airbag warning light comes on. After an accident, it stores crash data and locks itself.

In an emergency, the control unit decides which airbags and belt tensioners are triggered. For this, it continuously checks sensors and triggering circuits. A fault can impair the function of the entire airbag system, so the warning light should be checked promptly by a specialist workshop.

During repair at our workshop in Berlin, crash data is erased. Airbag24 repairs your own control unit that you send in. Whether a defect can be repaired only becomes clear after testing.

Which Ferrari SF90 XX Stradale generations are there?

The Ferrari SF90 XX Stradale was built in one series: F173, from 2023 to 2025. For classification, the model year and part number are therefore the decisive factors.

The SF90 XX Stradale is the road-going version of Ferrari's XX programme and was built as a limited special series. The series is internally designated F173.

  • F173 (2023–2025): the only series of this model; control units of this series are assigned by model year and part number.

We do not list any further generations for this model. The part number on the control unit determines the assignment clearly.

How do I identify my Ferrari SF90 XX Stradale airbag control unit?

The label on the control unit shows the part number. It determines the exact version of the control unit. Also check the model year and equipment of your vehicle before sending the unit in.

The part number is the most important reference for classification. Together with the model year and the vehicle identification number (VIN) of your Ferrari, it clearly identifies the matching control unit. We recommend photographing the label before removal.

The fault memory may show codes such as 01 (control unit faulty, internal fault) or 06 (battery voltage too low). A single code, however, does not prove a defect in the control unit. The cause is only determined by the inspection in the workshop.

Which airbag equipment does the Ferrari SF90 XX Stradale have?

Which airbags are installed in the Ferrari SF90 XX Stradale depends on the model year and equipment. Front airbags for driver and front passenger are usually standard in passenger cars; side, head or knee airbags may be added depending on the vehicle.

Binding information on the exact equipment of your vehicle can be found in the vehicle documents or in the manufacturer's documentation. The control unit controls all airbag modules of the system and evaluates the crash sensors for this purpose.

The route to repair with Airbag24 works as follows: the specialist workshop reads out the fault memory, disconnects the battery and removes the control unit. You then place a repair order online and send in the unit. Processing usually takes 3–4 working days (checking, repairing, testing).

The repaired control unit comes back with all vehicle data and is ready for use immediately after reinstallation — no coding or programming is required.

Shipping & repair from Germany

Airbag24 repairs your component in Berlin — usually within 3–4 working days.

Standard shipping within Germany is free; we normally return your part by UPS.

You pay for and insure the inbound shipment to us. On explicit request we ship by express — the extra cost is borne by the customer.

If you withdraw from the contract, you bear the cost of returning the item.