Ford Freestyle airbag control unit repair(1)
1 product
What should be considered with Ford Freestyle airbag control units?
The Ford Freestyle airbag control unit evaluates the crash sensors, triggers the airbags and monitors the entire airbag system. If it detects a fault, the airbag warning light comes on in the vehicle. Airbag24 repairs the control unit you send in; whether a fault can be rectified is determined by testing in each individual case.
After an accident, the control unit stores crash data and locks itself. We delete the crash data during the repair. A locked control unit should be checked by a specialist workshop beforehand.
Typical causes of a defect include an accident with stored crash data, ageing of the electronics, overvoltage or battery problems, moisture on plugs and contacts, and communication faults on the CAN bus.
Airbags are safety-critical, so you should not work on the airbag system yourself. A specialist workshop should take over the removal and the testing.
Which Ford Freestyle generations are there?
Our overview lists one series for the Ford Freestyle: the 1 D3 series, built from 2005 to 2009. It forms the basis for assigning your control unit.
The 1 D3 series covers the Ford Freestyle built between 2005 and 2009. Within this period, control units can differ depending on model year and equipment. For this reason, always state the model year of your vehicle.
- 1 D3 (2005–2009) – series of the Ford Freestyle, built during this period.
How do I identify my Ford Freestyle airbag control unit?
The part number on the label of the control unit determines the exact version. In addition, check the model year and equipment of your Ford Freestyle, as these details can influence the version of the control unit.
The part number is printed on the label of the control unit. This number allows the version to be assigned clearly. Without it, the assignment is harder to verify.
Our overview lists the following part number for the Ford Freestyle, without any claim to completeness:
- 5F93-14B321-CB
Examples of fault codes from our overview include B1342 (control unit defective, internal fault), U0151 (communication with the restraint system control unit lost) and B0001 (driver front airbag stage 1, ignition circuit interrupted). A single code does not prove a defect, however. Only testing shows whether the control unit is actually affected.
Which airbag equipment does the Ford Freestyle have?
Front airbags for driver and front passenger were standard on the Ford Freestyle. Front side airbags and curtain airbags were optional in model years 2005 and 2006 and became standard from model year 2007.
The curtain airbags can also deploy in a rollover. Whether your Ford Freestyle has this equipment should be checked using the vehicle documents or the equipment list.
The equipment determines which deployments the airbag control unit controls. For this reason, the exact assignment to the vehicle is important.
A Ford Freestyle airbag control unit repair runs by mail-in procedure. Have the fault memory read, the battery disconnected and the control unit removed by a specialist workshop. Then create a repair order online and send the unit in. Processing usually takes 3–4 working days (testing, repairing, checking).
The repaired control unit returns with all vehicle data and is immediately ready for use after reinstallation — no coding or programming is required.
Shipping & repair from Germany
Airbag24 repairs your component in Berlin — usually within 3–4 working days.
Standard shipping within Germany is free; we normally return your part by UPS.
You pay for and insure the inbound shipment to us. On explicit request we ship by express — the extra cost is borne by the customer.
If you withdraw from the contract, you bear the cost of returning the item.