Airbag control unit with part number 0 285 010 058

What is the function of Airbag Control Unit 0 285 010 058?

The airbag control unit with part number 0 285 010 058, presumably manufactured by Bosch, serves as the central control unit for the passive safety system in the Daewoo Tico KL (1991–2001). It is responsible for evaluating signals from crash sensors and, in the event of a collision, triggering the airbags and seatbelt pretensioners.

As the “brain” of the restraint system, this component continuously monitors all connected sensors and actuators. Upon detecting a collision exceeding a certain severity threshold, it delivers critical ignition pulses to the corresponding airbag modules and seatbelt pretensioners within milliseconds.

The proper functioning of this control unit is essential for occupant safety. Any internal fault or blockage caused by stored crash data results in deactivation of the entire system, indicated by the airbag warning light.

Why does Control Unit 0 285 010 058 fail?

The most common cause of failure for Control Unit 0 285 010 058 is the storage of crash data after an accident, which triggers an electronic lockout. Other reasons include hardware defects such as faulty capacitors, board wear, or damage caused by moisture ingress.

After an airbag deployment, the unit permanently stores crash data in its internal memory (crash memory). This safety measure prevents reuse without professional diagnostics and disables the system. A so‑called “crash reset” is required to restore functionality.

Electronic components on the circuit board age over time. Defective capacitors or resistors can lead to internal malfunctions. Perplexity analysis reveals that moisture entering the housing can also cause corrosion and short circuits on the board.

Improper repair attempts in the past may likewise result in irreparable damage. Therefore, it is crucial to send the control unit unopened to a specialized workshop to ensure clean, safe repairs.

How do you recognize a defect in Control Unit 0 285 010 058?

A defective Control Unit 0 285 010 058 typically manifests as a constantly illuminated or intermittently flashing airbag warning light on the instrument cluster. Often, communication with the diagnostic tool becomes impossible, and error codes stored in the fault memory cannot be cleared.

The primary and unmistakable symptom is the active airbag warning light, indicating that the entire restraint system is non‑functional—potentially leading to severe consequences in the event of a crash.

Another clear sign is when the workshop’s diagnostic equipment cannot access the airbag control unit. The unit fails to respond to queries, making precise fault analysis via the OBD port impossible.

If communication remains possible, error codes such as “Crash data stored” or “Internal control unit error” are often logged. These cannot be erased using standard workshop testers and require specialized repair of the control unit.

In which vehicles is Control Unit 0 285 010 058 installed?

The airbag control unit with part number 0 285 010 058 is specific to the Daewoo Tico model series KL, produced between 1991 and 2001. Airbag24 offers professional, reliable repair services for this control unit.

At Airbag24, we service part number 0 285 010 058 for the following specific model:

Daewoo: Tico KL (1991–2001)

Although this part number is highly specific, related Bosch numbers exist, such as 0 285 010 001 (used in Renault models) or 0 285 010 110 (found in Peugeot 207). This demonstrates that the underlying technology and repair methods—especially crash resetting—are applicable across an entire family of Bosch control units, also employed in Fiat, Opel, and Renault vehicles.

How is Control Unit 0 285 010 058 professionally repaired?

Professional repair at Airbag24 begins with an initial inspection, followed by targeted correction of the defect. This involves either resetting the stored crash data or replacing faulty components on the circuit board. The original vehicle coding is preserved, eliminating the need for reprogramming.

Once the control unit arrives at Airbag24, it undergoes thorough electronic analysis. For a successful repair process, it is essential that the unit be sent unopened.

When crash data is stored, our technicians perform a specialized reset, erasing accident data from the internal memory without altering vehicle‑specific configurations such as the VIN.

If a hardware defect is present, faulty components such as capacitors or resistors are replaced on the circuit board through precise soldering. This is performed under controlled conditions to avoid damaging the sensitive electronics.

Subsequently, the full functionality of the control unit is thoroughly tested. Each repair comes with a 12-month warranty and is ready for immediate use after installation (plug-and-play).

What shipping options does Airbag24 offer?

You can either send your defective control unit to us free of charge yourself, or arrange convenient UPS pickup from your preferred address. For return shipping, you have the choice between free standard UPS shipping, faster UPS express shipping, and, for both options, cash-on-delivery.

To send your control unit to us, please pack it securely and include the completed repair form. You can then ship the package yourself or take advantage of the convenient UPS pickup service, which you can select during the ordering process.

Upon successful repair, we typically return the control unit via free standard UPS shipping. If you require faster delivery, you may opt for UPS express shipping.

Both standard and express shipping can be combined with the “cash-on-delivery” option. Alternatively, you also have the option to pick up your repaired control unit in person at our premises.