Airbag control unit with part number 00052085713

What does the airbag control unit 00052085713 do?

The airbag control unit 00052085713 forms the central control unit of the restraint system (SRS) of Chrysler and Fiat. It processes the signals of the crash sensors and determines in an accident within milliseconds which airbags and seatbelt pretensioners are triggered.

In addition, it monitors the entire system without interruption. If a fault occurs, it reports it via the airbag warning light in the instrument cluster.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 00052085713 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Other causes are aged electronic components, cold solder joints, moisture at plug connections and voltage spikes.

A normal diagnostic tool cannot erase the crash data. Airbag24 erases it during the repair, so its influence on the unit ends.

Aged electronic components and cold solder joints develop inside the circuit board over time. Moisture and corrosion at the plug connections, as well as voltage spikes, for example through a weak battery or a jump start, are also possible.

Which cause applies in the individual case only becomes clear through an examination of the unit.

How can you tell that the 00052085713 is defective?

The airbag warning light in the instrument cluster lights up constantly or intermittently, and a fault message appears in the instrument cluster. In addition, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

The warning light is the signal you should take seriously, because it shows that something is wrong in the restraint system. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

Therefore have the system examined promptly before you drive on.

Which vehicles is the 00052085713 fitted in?

The control unit 00052085713 is fitted in these vehicles: Chrysler Neon 3rd generation (2016-2021); Fiat Tipo 356 (2016-2020) and 356 Facelift (from 2020).

The list shows the vehicles recorded for this unit.

• Chrysler Neon 3rd generation (2016-2021)
• Fiat Tipo 356 (2016-2020)
• Fiat Tipo 356 Facelift (from 2020)

Compare the part number on the label of the removed unit with this page; that way you can see whether it is the right unit. Also have the fault memory read out beforehand, because only the log shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 00052027042, 00052055639, 00052055640, 00052055641, 00052058730, 00052078052.

How does the repair of the 00052085713 work?

You have the fault memory read out, enclose the log and then disconnect the battery. Only then do you remove the control unit, create a repair order online and send the unit in well packed. Processing at Airbag24 takes 3–4 working days in general.

At Airbag24 the unit is first checked and then tested on the test bench. Defective components are repaired, the stored crash data is erased, and a function test follows at the end.

Your own unit then comes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 00052085713 get to Airbag24?

The control unit 00052085713 goes to Airbag24 by parcel, or you have it collected by UPS for an extra charge. The return after the repair takes place by UPS.

Put the printed repair order in the parcel and pack the unit shock-resistant.