Airbag control unit with part number 00052195567

What does the airbag control unit 00052195567 do?

In the Fiat vehicle, the airbag control unit 00052195567 runs the SRS restraint system. It evaluates the messages from the crash sensors and decides within milliseconds in an accident whether airbags and seatbelt pretensioners are triggered.

It also monitors all components of the system during operation. Detected faults are output via the airbag warning light in the instrument cluster.

If an accident has occurred, crash data is held in memory, and the unit locks itself.

Why does the control unit 00052195567 fail?

Most often, the cause is crash data stored after an accident, even if no airbag was triggered. Aged electronic components, cold solder joints, moisture and corrosion on connectors, and voltage spikes such as those from a weak battery are also possible causes.

Such crash data cannot be removed with an ordinary diagnostic tool.

The other causes relate to the electronics and the contacts inside the unit. Whether one of them is present only becomes apparent during the inspection.

How can you tell that the 00052195567 is defective?

The airbag warning light in the instrument cluster indicates a defect when it lights up constantly or intermittently. In addition there may be an error message in the instrument cluster, a diagnostic tool without a connection to the control unit, and a fault memory that cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may then possibly fail to trigger.

You should take such warnings seriously and have them clarified promptly.

Which vehicles is the 00052195567 fitted in?

The control unit 00052195567 from Fiat is fitted in these vehicles: Fiat Tipo 356 Facelift (from 2020).

Below, you can see which vehicles are recorded for this part number.

• Fiat Tipo 356 Facelift (from 2020)

Compare the part number on the label of the removed unit with this page so you know it is the matching unit. What matters for the cause is the fault memory: have it read out before removal, because it shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 00052090728, 156348104, 208055, 52017547.

How does the repair of the 00052195567 work?

First have the fault memory read out and attach the log to the unit. Then disconnect the battery, remove the control unit 00052195567 and create a repair order online.

Then send the well-packed unit. Airbag24 checks it on the test bench, repairs defective components and carries out a function test. After that, your own unit is returned to you. With this control unit, erasing the crash data is often not possible. If the crash data needs to be erased, please contact us briefly before sending the unit in – we will check your part number.

Checking, repairing and testing usually takes 3–4 working days at Airbag24.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 00052195567 get to Airbag24?

You send the control unit 00052195567 as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 returns it to you by UPS.

Place the printed repair order in the parcel and pack the unit shock-proof.