Airbag control unit with part number 01393756080

What is the function of airbag control unit 01393756080?

The airbag control unit with part number 01393756080 is the central control module for the occupant protection system in the Citroën Jumper II. Its primary task is to process signals from crash sensors and, in the event of a collision, activate the necessary restraint systems such as airbags and seatbelt pretensioners.

As a safety-critical component, it continuously monitors all connected subsystems, including various airbags (e.g., driver and passenger airbags), seatbelt pretensioners, and acceleration and pressure sensors distributed throughout the vehicle. In the event of a collision, the control unit determines within milliseconds which airbags should deploy and at what intensity to provide optimal occupant protection.

At the same time, the unit stores all system-relevant events and fault codes in its internal memory. These data are essential for workshop diagnostics but can also become the cause of a functional lockout after an accident.

Why does control unit 01393756080 fail?

The most common reason for failure of control unit 01393756080 is the storage of crash data following an accident, which prevents further operation. Other defects often stem from internal electronic malfunctions or communication issues that require repair at the component level.

After an accident involving deployment of airbags or seatbelt pretensioners, the control unit records so‑called crash data. These data remain permanently stored, placing the unit into a locked state. This lockout mode serves as a safety precaution, preventing continued operation until the unit is professionally reset. Simply clearing the fault memory using a diagnostic tool is not sufficient in this case.

A further typical source of failure is internal board-level defects, which may involve faulty electronic components leading to communication interruptions or incorrect status messages. In such cases, the control unit can no longer perform reliable diagnostics, often indicated by warning lights that remain illuminated continuously.

How do you recognize a defect in control unit 01393756080?

A defect in control unit 01393756080 primarily manifests as a permanently or intermittently illuminated airbag warning light on the instrument cluster. Often, communication with the control unit via a diagnostic tool becomes impossible, or persistent error codes remain unerasable.

The most obvious symptom is the active airbag warning light, signaling a fault in the restraint system and clearly indicating that protective functions are no longer guaranteed. Consequently, the vehicle would fail the next mandatory technical inspection.

During workshop diagnostics, it is frequently observed that no connection can be established with the airbag control unit. The diagnostic tool reports a communication error, suggesting a serious internal malfunction of the module.

In other cases, although a connection can be made, the fault memory contains entries such as “Internal Error” or specific error codes that persist despite multiple attempts to clear them. This is typically indicative of stored crash data or hardware damage.

Malfunctioning individual components—such as a passenger airbag that cannot be activated—may also point to a defect in the central control unit, even if the airbag itself remains intact.

In which vehicles is control unit 01393756080 installed?

The airbag control unit with part number 01393756080 is specifically designed for the second-generation Citroën Jumper van. At Airbag24, we specialize in repairing this unit for this particular model to restore full functionality of the safety system.

At Airbag24, we repair control unit 01393756080 for the following vehicle model:

Citroën Jumper II (model years 2001–2006)

How is control unit 01393756080 professionally repaired?

Professional repair of control unit 01393756080 at Airbag24 includes a detailed fault analysis, electronic troubleshooting at the component level, and reprogramming of the device—including deletion of crash data. If repair is technically unfeasible, remanufactured replacement units are available.

Upon submission to Airbag24, the control unit undergoes a standardized repair process. First, stored fault codes are read out to establish an initial diagnosis. This is followed by an in-depth electronic examination of the circuit board to identify defective components such as processors, memory chips, or other parts.

A key step is erasing the crash data. Using specialized hardware and software, the control unit is restored to its factory settings, thereby lifting any functional lockout. This process is often referred to as “neuro‑programming” and fully restores the unit’s functionality. Following repair, the control unit undergoes thorough testing and is ready for immediate reinstallation. All repairs come with a 12‑month warranty.

What are the benefits of repair?

The primary advantage of repairing the original control unit 01393756080 is significant cost savings compared to purchasing a new part directly from the manufacturer. Additionally, there’s no need for time‑consuming re‑coding of the control unit, as the vehicle‑specific configuration remains intact.

Repairing is considerably more economical than replacing the unit with a new one, making vehicle maintenance more cost‑effective. Since the original component is refurbished, all vehicle‑specific data and coding are preserved. After repair, the control unit can be easily reinstalled (plug-and-play) and functions immediately.

Moreover, repair represents a sustainable solution, as valuable electronic components are reused instead of being discarded. The 12‑month warranty on the completed repair provides added peace of mind.

What shipping options does Airbag24 offer?

To send your control unit to Airbag24, you can either ship it yourself at no charge or arrange a convenient UPS pickup. For the return shipment, free standard options are available, along with faster express and cash‑on‑delivery services from UPS, ensuring maximum flexibility.

For the outbound shipment, you have two choices: you can pack the removed control unit yourself and send it to us free of charge, or schedule a UPS pickup at your preferred location.

For returning the repaired unit, Airbag24 offers several options:

The free UPS standard shipping is the default choice. For quicker delivery, you can select UPS express shipping. Both options are also available as cash‑on‑delivery shipments, where payment is made directly to the courier. Alternatively, in‑store personal pickup is also an option.