Airbag control unit with part number 04686602AE

What is the function of the Airbag Control Unit 04686602AE?

The airbag control unit with part number 04686602AE is the central control module for the passive safety system in Chrysler vehicles such as the Voyager and Town & Country. It continuously analyzes data from crash sensors and, in the event of a collision, determines whether to deploy the airbags and seatbelt pretensioners, making it a critical safety component.

As the “brain” of the restraint system (SRS – Supplemental Restraint System), this control unit processes signals from various acceleration and pressure sensors throughout the vehicle. Based on this data, it identifies the type and severity of a collision.

On the basis of this analysis, the unit selectively activates the necessary safety components. These include not only front and side airbags but also seatbelt pretensioners, which help position occupants optimally at the moment of impact. Proper functionality is therefore essential for occupant protection.

Why does the control unit 04686602AE fail?

The most common causes of failure for the control unit 04686602AE are internal electronic faults, often indicated by error codes such as 65535 or 93F9, along with stored crash data after an accident. Additional defects may arise from overvoltage damage or communication issues on the CAN bus, necessitating repair or reset procedures.

Following a crash, the control unit stores so‑called crash data and, for safety reasons, locks itself out. This lock prevents re‑deployment and must be professionally reset to restore full functionality of the airbag system—making it one of the most frequent reasons for service.

Internal faults, frequently signaled by error codes like 65535 (internal control unit error) or 93F9, point to defects in hardware components. These can include faulty memory chips, processors, or other circuit board parts that fail due to aging or thermal stress.

Overvoltage damage—such as from an incorrectly connected starter battery or jump-start procedure—can also harm the control unit’s sensitive electronics. Similarly, CAN bus errors may occur, preventing the unit from communicating with other control modules in the vehicle.

How do you recognize a defective Airbag Control Unit 04686602AE?

A defect in the control unit 04686602AE primarily manifests as a permanently illuminated or flashing airbag warning light (SRS light) in the instrument cluster. Often, the fault stored in the error memory cannot be cleared, or communication with the control unit via a diagnostic tool becomes impossible.

The clearest indication is the active SRS warning light, signaling to the driver that there is a problem with the restraint system and that the airbags might not deploy in the event of another crash. An immediate inspection at a workshop is mandatory in such cases.

Another clear symptom occurs when a workshop attempts to read the error memory but cannot establish a connection to the airbag control unit. The unit fails to respond to diagnostic requests, indicating a serious internal fault.

Sometimes communication is possible, yet the error code pointing to an internal defect of the control unit cannot be permanently erased. It reappears immediately after an attempt to clear it, confirming a hardware issue.

In which vehicles is the control unit 04686602AE installed?

The airbag control unit with part number 04686602AE is mainly used in various models of the Chrysler brand. This includes, in particular, the fourth-generation Chrysler Voyager as well as several variants of the Chrysler Town & Country, E-Class, and TC. Compatibility spans multiple series and generations of these vehicles.

At Airbag24, we repair the control unit 04686602AE for the following Chrysler models:

Chrysler Voyager: 4th generation (2000–2004) and 4th generation facelift (2004–2007)

Chrysler Town & Country: 1st generation, 2nd generation, GS, NS, RT

Chrysler E-Class: 1st generation

Chrysler TC: 1st generation

Chrysler Town & Country EV: RT

How is the control unit 04686602AE repaired at Airbag24?

At Airbag24, repairing the control unit 04686602AE follows a systematic process. After a precise initial diagnosis to identify the fault, the unit is restored according to its specific defect—this may involve repairing the electronics or resetting crash data. Final tests ensure full functionality and reliability.

Once the removed control unit has been received at Airbag24, experienced mechatronics technicians perform a comprehensive analysis. Using specialized diagnostic tools, the exact fault source is pinpointed down to the component level, ensuring targeted and long-lasting repairs.

Repair work is carried out depending on the nature of the fault. If crash data was recorded following an accident, the control unit is professionally reset. For electronic faults—such as internal errors or communication issues—the defective components on the circuit board are either replaced or repaired by qualified specialists.

Following repair, each control unit undergoes rigorous quality inspection and functional testing. This ensures it operates flawlessly once again and meets all safety requirements. We provide a 12-month warranty on every repair performed.

What shipping options does Airbag24 offer?

For sending your control unit, Airbag24 provides flexible options: you can ship it yourself or arrange convenient UPS pickup. For returning the repaired unit, you have access to free UPS standard shipping as well as faster express options. Both methods can also be combined with cash-on-delivery payment.

For the outbound shipment, you have two choices: you can send the package to us yourself or use UPS’s convenient pickup service, which collects the package directly from your location.

The return shipment is standardly provided free of charge via UPS standard delivery, typically arriving within 1–3 business days. If you need the part back sooner, you can opt for UPS express shipping, which usually delivers within 1–2 business days.

To maximize payment flexibility, we offer cash-on-delivery for both shipping methods. Alternatively, you can also pick up your repaired control unit in person at our facility.