Airbag control unit with part number 04759012AD

What is the function of the airbag control unit 04759012AD?

The airbag control unit with part number 04759012AD is the central control module for the occupant safety system (SRS) in the second-generation Chrysler LHS. It analyzes data from connected crash sensors and determines whether to activate airbags and seatbelt pretensioners in the event of a collision, providing optimal protection for occupants.

As the brain of the passive safety system, this control unit is responsible for reacting to a collision within milliseconds. It not only controls the deployment of front and side airbags but also manages the activation of seatbelt pretensioners. Following an accident, so‑called crash data are stored in the internal memory, which locks the system to prevent reuse without professional repair.

This data storage is a critical feature that ensures the vehicle undergoes expert inspection after an accident. Simply clearing the fault memory via a diagnostic tool is insufficient, as the lock is embedded at the hardware level directly within the control unit itself.

Why does the airbag control unit 04759012AD fail?

A failure of the 04759012AD control unit is primarily caused by stored crash data following an accident, which block the system. Other causes include internal electronic component defects, moisture damage, faulty connectors, or, more rarely, software errors requiring professional repair.

The most common reason for repair is the accumulation of crash data. Even minor accidents—such as those triggering only the seatbelt pretensioners—can result in the control unit being locked. This lock can only be released through specialized intervention.

In addition, electronic components on the circuit board may fail due to aging or environmental factors like moisture. Defective wiring, corroded connectors, or mechanical damage to the housing can also lead to malfunctions. For Chrysler models of this generation, specific issues such as complete system failure under high temperatures have also been reported.

Technical note: Control units with similar part numbers, such as 04672456AD or 04794842AE, are often compatible or exhibit similar fault patterns. Therefore, precise diagnosis is essential.

How do you recognize a defect in the 04759012AD?

A defect in the 04759012AD control unit typically manifests as a continuously illuminated or flashing airbag warning light (SRS lamp) on the instrument cluster. Communication with the control unit via a diagnostic tool is often impossible, leaving the airbags deactivated in an emergency and compromising vehicle safety.

The most noticeable sign is the active SRS indicator light, clearly signaling to the driver that there is a problem with the restraint system and that the airbags may not deploy.

Another clear symptom is the control unit’s inability to respond to diagnostic requests. When a workshop attempts to read the fault memory, communication fails—the device becomes unreachable on the vehicle’s onboard network.

Additionally, specific error codes may be stored in the fault memory, directly indicating an internal malfunction, such as “component defective” or “crash sensor defective.” In some cases—particularly with Chrysler models—this may even be accompanied by symptoms like a clock failure in the cockpit.

In which vehicles is the 04759012AD installed?

The airbag control unit with part number 04759012AD is specifically designed for the second-generation Chrysler LHS. At Airbag24, we specialize in repairing this control unit for vehicles of this model series, restoring full functionality of the safety system while preserving the vehicle’s original integrity.

At Airbag24, we repair the 04759012AD control unit for the following model:

Chrysler LHS, second generation (model years 1998–2001)

How is the 04759012AD professionally repaired?

At Airbag24, repair of the 04759012AD begins with a detailed diagnosis of the submitted unit. Next, stored crash data are professionally erased, defective electronic components are replaced with genuine parts, and any software issues are resolved. Following a final functional test, you receive a fully operational control unit back.

The repair process at Airbag24 follows a systematic, rigorously tested procedure. First, the unopened control unit undergoes an initial inspection, and the fault memory is read to verify reported symptoms.

Subsequently, actual restoration takes place. Specialized technicians erase persistent crash data and restore the unit to its factory settings. If electronic components are found to be defective, they are expertly replaced with original‑equipment‑quality parts. The unit is also thoroughly checked for moisture or evidence of previous improper repairs.

Finally, each repaired control unit undergoes a comprehensive functional and quality inspection on a test bench. We provide a 12-month warranty on all repairs.

What shipping options are available at Airbag24?

To send your control unit to Airbag24, you can either ship it yourself free of charge or arrange a convenient UPS pickup at your preferred location. For returning the repaired unit, we offer free standard UPS shipping as well as faster express options, including cash-on-delivery.

For sending the unit to us, you have two simple choices: ship the removed control unit to us at your own expense, or use our convenient UPS pickup service directly at your location.

After successful repair, you can choose from the following return shipping options:

Free standard UPS shipping (1–3 business days)

UPS express shipping (1–2 business days)

Standard UPS shipping with cash-on-delivery (1–3 business days)

Express UPS shipping with cash-on-delivery (1–2 business days)

Of course, you can also pick up the repaired unit in person at our facility.

Is repairing the 04759012AD worthwhile?

Repairing the airbag control unit 04759012AD is an economically and technically sensible alternative to the costly purchase of a new part. You can save up to €800 compared to a brand-new component while retaining your vehicle’s original configuration. After repair, the control unit is immediately ready for use (plug-and-play).

A new control unit from the manufacturer often comes with substantial costs. Repair offers a significantly more affordable solution without compromising safety or quality. You receive a fully functional component backed by a 12-month warranty.

An additional key advantage is that no time-consuming coding or programming is required after installation. Since your vehicle’s original control unit remains intact, it fits perfectly with your vehicle’s configuration post-repair, saving both time and extra workshop expenses.