Airbag control unit with part number 1353560080

What is the function of the airbag control unit 1353560080?

The airbag control unit with part number 1353560080 is the central control module for the occupant protection system in models such as the Fiat Qubo (225) and Fiorino III. It processes data from crash sensors and is responsible for precisely deploying the driver, passenger, and side airbags, as well as the seatbelt pretensioners, at the right moment in the event of a collision.

As an original OEM component from Fiat, this module serves as the brain of the entire passive safety system. It continuously monitors all connected components—such as sensors, airbag modules, and seatbelt pretensioners—for proper functionality. If a system‑critical fault occurs or a collision is detected, the control unit decides whether to activate the restraint systems.

The correct operation of this unit is crucial for the safety of vehicle occupants and a prerequisite for passing the main inspection (HU).

Why does the control unit 1353560080 fail?

The most common cause of failure for the control unit 1353560080 is the storage of crash data after an accident. This data permanently disables the module’s functionality and must be professionally reset. Other causes include internal electronic defects in components that lead to communication failures or total malfunction.

Storing crash data is a manufacturer‑specified safety feature that locks the control unit after an airbag deployment. While this does not necessarily indicate hardware damage, it renders the component unusable without professional repair. A simple replacement often involves high costs and extensive coding procedures.

Electronic faults may manifest as cold solder joints, defective processors, or failing memory chips. These defects prevent proper communication within the vehicle and trigger the warning light. The issue also affects identical units with OE reference numbers 1367507080 or 1371006080.

How do you recognize a defect in the 1353560080?

A defect in the control unit 1353560080 is primarily indicated by the airbag warning light on the dashboard remaining constantly illuminated. Another clear sign is when the control unit becomes inaccessible to diagnostic tools, preventing workshops from reading fault codes or communicating with the unit.

The most noticeable symptom is the persistently lit airbag warning light. It fails to turn off after starting the vehicle, signaling a serious, safety‑relevant system error.

Another typical indication is a complete loss of communication. When a workshop attempts to access the airbag module via the OBD interface, no response is received—confirming an internal defect within the control unit itself.

In which vehicles is the control unit 1353560080 installed?

The airbag control unit 1353560080 is used as an original part mainly in Fiat vehicles. It is specifically designed for models like the Fiat Qubo of series 225 and the similar Fiat Fiorino III, covering various model years and engine types.

At Airbag24, we repair the control unit with part number 1353560080 for the following models and series:

Fiat Qubo (series 225) (model years 2008–2016)

Fiat Qubo Facelift (series 225) (model years 2016–2024)

The component is also found in the Fiat Fiorino III and its Qubo variants, particularly paired with engines such as the 1.3 D Multijet, the 1.4 gasoline, and the 1.4 Natural Power.

Is repairing the 1353560080 worthwhile?

Yes, repair is an economically and technically sensible alternative to purchasing a new unit. You save significantly compared to a new part, which often costs over 200 euros, while avoiding the need for time‑consuming re‑coding of the vehicle since the original configuration remains intact.

According to market research, a compatible new part like Meat & Doria 208060 costs around 220 euros. Repair is considerably more cost‑effective and restores full functionality. You retain the original, vehicle‑specific coding, enabling easy “plug-and-play” reinstallation without expensive programming at an authorized workshop.

Moreover, refurbishment is a sustainable solution, as valuable electronic components are reused. We also provide 2 years’ statutory liability for defects on every repaired unit.

How does the repair of the 1353560080 work at Airbag24?

After removal and shipment of the control unit to Airbag24, a comprehensive technical analysis is performed to identify the fault. Subsequently, stored crash data is erased, defective electronic components are replaced, and the device is restored to factory settings. A final functional test ensures the quality of the repair.

The process begins with the professional removal of the control unit at your workshop. Upon receipt at Airbag24, the unit is inspected by specialized technicians to pinpoint the exact cause of the fault—whether it’s crash data or an electronic defect.

The actual repair involves precisely resetting the internal memory or replacing defective components on the circuit board. After successful restoration, the module undergoes a calibration and testing procedure to ensure it once again meets the manufacturer’s specifications. All repairs include 2 years' statutory liability for defects.