Airbag control unit with part number 1367508080

What does the airbag control unit 1367508080 do?

The airbag control unit 1367508080 acts as the central unit controlling the restraint system (SRS) of Peugeot. It evaluates the signals from the crash sensors and decides in an accident within milliseconds which airbags and seatbelt pretensioners are triggered.

The unit monitors the system constantly and reports faults via the airbag warning light. This includes the sensors, the airbags and the wiring up to the seatbelt pretensioners.

After an accident, it stores crash data and locks itself.

Why does the control unit 1367508080 fail?

The most common causes are crash data stored after an accident, even if no airbag has been triggered. A standard diagnostic tool cannot delete this data. Other causes are aged components, cold solder joints, moisture and corrosion on connectors, and voltage spikes, for example from a weak battery or jump-starting.

Airbag24 removes the crash data during the repair. This takes place as part of the regular work on the unit.

The other causes concern the condition of the electronics. Over the years, components lose reliability, solder joints can become cold, and moisture damages connectors.

How can you tell that the 1367508080 is defective?

A defect on the 1367508080 shows when the airbag warning light in the instrument cluster lights up, permanently or intermittently, and a fault message appears there. If the diagnostic tool does not connect to the control unit, and the fault memory cannot be cleared, the fault is likely.

In such a fault, airbags and seatbelt pretensioners may possibly not trigger in an emergency. Do not ignore the warning, even if the vehicle drives inconspicuously.

Have the finding checked promptly.

Which vehicles is the 1367508080 fitted in?

The assignment depends on the part number 1367508080. The control unit 1367508080 is fitted in these vehicles: Peugeot Bipper I (2007-2015).

The overview contains the vehicles known to us for this part number.

• Peugeot Bipper I (2007-2015)

Compare the part number on the label of the removed unit with this page, and you will know that it is the correct unit. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 1372894080, 1372897080, 1610617380, 59001158, 98 039 168 80.

How does the repair of the 1367508080 work?

Processing at Airbag24 usually takes 3–4 working days. Beforehand, have the fault memory read out and enclose the log, then disconnect the battery and remove the control unit. Next, create the repair order online and pack the unit well.

Airbag24 checks the unit on the test bench, repairs defective components, deletes stored crash data and runs a function test. Your own unit is then returned to you.

These 3–4 working days apply only to the work at Airbag24.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 1367508080 get to Airbag24?

You send the control unit 1367508080 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Place the printed repair order in the parcel and pack the unit shock-resistant.