Airbag control unit with part number 1371007080

What does the airbag control unit 1371007080 do?

The airbag control unit 1371007080 is the central control unit of the restraint system (SRS) for Peugeot. It evaluates the signals from the crash sensors and decides in an accident within milliseconds which airbags and seatbelt pretensioners are triggered. It reports faults via the airbag warning light.

During operation the control unit continuously checks the entire trigger chain. This includes the sensors, the wiring to the triggers and the triggers themselves.

If the unit registers an accident, it stores crash data and then locks itself.

Why does the control unit 1371007080 fail?

The most common cause is crash data stored after an accident, even if no airbag has been triggered; an ordinary diagnostic tool cannot delete it. In addition, ageing electronic components, cold solder joints, moisture and corrosion on plug connectors, and voltage spikes, for example from a weak battery or jump-starting, come into question.

Crash data remains stored in the unit until it is removed. During repair at Airbag24 these entries are deleted.

The other causes concern components that age and connections where moisture acts. Which of these applies in an individual case only the test shows.

How can you tell that the 1371007080 is defective?

A defect shows itself when the airbag warning light in the instrument cluster lights up permanently or intermittently, an error message appears in the instrument cluster, the diagnostic tool cannot establish a connection to the control unit, or the fault memory cannot be cleared. In this case airbags and seatbelt pretensioners may not deploy in an emergency.

The warning light is the first sign to watch for. React to it promptly.

Even without a visible light, a look at the fault memory can provide clarity if something about the vehicle strikes you as odd.

Which vehicles is the 1371007080 fitted in?

The airbag control unit 1371007080 is fitted in these vehicles: Peugeot Bipper I (2007-2015).

The vehicles at a glance:

• Peugeot Bipper I (2007-2015)

Before you remove the unit, compare the part number on the label with this page. That way you know for certain that it is the right unit. Also have the fault memory read out in advance, because only this finding shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 1372894080, 1372897080, 1610617380, 59001158, 98 039 168 80.

How does the repair of the 1371007080 work?

Have the fault memory read out first, enclose the log, disconnect the battery and only then remove the control unit; afterwards create a repair order online and send in the well-packed unit. Airbag24 checks it on the test bench, replaces defective components, deletes the crash data and carries out a function test. Processing at Airbag24 usually takes 3–4 working days.

The log belongs to the consignment so that the finding is documented. After the function test you receive your own unit back. Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 1371007080 get to Airbag24?

You send the control unit 1371007080 as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 sends the unit back by UPS.

Place the printed repair order in the parcel and pack the control unit shock-proof.