Airbag control unit with part number 1376423080

What does the airbag control unit 1376423080 do?

In Peugeot vehicles, the airbag control unit 1376423080 controls the restraint system (SRS). It responds to the signals of the crash sensors and decides within milliseconds which airbags and seatbelt pretensioners are triggered in an accident.

It checks the system continuously during operation and indicates faults with the airbag warning light.

After an accident the unit stores crash data and locks itself.

Why does the control unit 1376423080 fail?

Stored crash data is the most common cause of a problem with the 1376423080, even without a triggered airbag. Other causes are ageing, cold solder joints, moisture and voltage spikes.

Crash data cannot be erased with a common diagnostic tool, so Airbag24 takes care of that during the repair.

Ageing of the electronics can weaken components. Cold solder joints lead to contact faults, and moisture with corrosion attacks plug connectors.

Voltage spikes from a weak battery or from a jump-start put additional strain on the unit.

How can you tell that the 1376423080 is defective?

The airbag warning light in the instrument cluster indicates a defect on the 1376423080 by staying on permanently or intermittently. The fault message in the instrument cluster, a missing contact to the diagnostic tool and a fault memory that cannot be cleared confirm this.

In an emergency, airbags and seatbelt pretensioners may then fail to trigger. With signs of this kind, have the system checked promptly.

Which vehicles is the 1376423080 fitted in?

The control unit 1376423080 is used in these vehicles: Peugeot Bipper I (2007-2015).

The list below shows the models recorded for this part number.

• Peugeot Bipper I (2007-2015)

Compare the part number on the label of the removed unit with this page to make sure it is the right unit. Also have the fault memory read out in advance. Only that result shows whether the control unit itself is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 1372894080, 1372897080, 1610617380, 59001158, 98 039 168 80.

How does the repair of the 1376423080 work?

First read out the fault memory and attach the log. Then disconnect the battery; only then remove the 1376423080. Next, create a repair order online and send the unit in well packed.

On the test bench, Airbag24 checks the unit, replaces defective components, erases crash data and carries out a functional test. Processing at Airbag24 usually takes 3–4 working days. Afterwards your own unit goes back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 1376423080 get to Airbag24?

You can send the control unit 1376423080 as a parcel or book a UPS collection for an extra charge. The return journey is made by UPS.

Put the printed repair order in the parcel and pack the unit shockproof.