Airbag control unit with part number 1480105080

What is the Airbag Control Unit 1480105080?

The airbag control unit with part number 1480105080 is the central control module for the passive safety system in the Fiat Scudo 220 (model years 1996–2006). It analyzes data from crash sensors and, within milliseconds, determines whether to deploy airbags and seatbelt pretensioners.

As the “brain” of the restraint system, this module continuously monitors all connected components—from impact sensors to the airbag igniters. In the event of a collision, it processes incoming signals and precisely activates the necessary safety mechanisms to provide optimal protection for occupants.

Therefore, flawless operation of this control unit is essential for vehicle safety. Any internal fault or blockage caused by stored data will disable the entire airbag system.

Why Does Control Unit 1480105080 Fail?

The most common cause of failure for control unit 1480105080 is stored crash data that locks the system after an accident. Other reasons include internal electronic malfunctions caused by overvoltage, water damage, or aging components.

A major issue is the storage of crash data. Even minor collisions without airbag deployment—such as rear-end or side impacts—can result in the control unit recording a crash event. For safety reasons, this entry locks the device and can only be cleared through specialized repair.

Electronic malfunctions are another frequent source of problems. Overvoltage in the vehicle’s electrical system, moisture ingress, or failure of individual semiconductor components on the circuit board can lead to complete system failure. Similar issues also occur with comparable part numbers like 1496611080.

Specifically for Fiat Scudo models, workshops report warning messages such as “Airbag defective” on the dashboard, often stemming from internal faults in the control unit—such as issues with side‑impact sensors or stored activations of seatbelt pretensioners.

How Do You Recognize a Fault in 1480105080?

The clearest symptom of a defective airbag control unit 1480105080 is the SRS airbag warning light constantly illuminated or flashing on the instrument panel. Additionally, diagnostic tools may fail to establish communication with the control unit.

The airbag warning light indicates a critical system error. Ignoring this warning poses a significant safety risk, as airbags and seatbelt pretensioners might not deploy during a real collision.

Another clear sign is when a professional workshop attempts to read the fault memory but cannot connect to the airbag module. This points directly to a severe internal defect in the control unit.

When fault codes are retrieved, vague entries such as B1000 or internal control unit errors (comparable to 65535 or 93F9 in other models) indicate the module itself as the root cause of the problem.

In Which Vehicles Is Control Unit 1480105080 Installed?

The airbag control unit with part number 1480105080 was specifically designed for the Fiat Scudo model series 220, produced from 1996 to 2006. It is found in both van and passenger car variants of this model.

At Airbag24, we repair the control unit with part number 1480105080 for the following model:

Fiat Scudo (Series 220, model years 1996–2006)

We also professionally refurbish the technically related control unit with part number 1496611080, which is likewise used in this vehicle platform.

Is Repairing 1480105080 Worth It?

Yes, repair is the most economical and sustainable solution. Compared to a new part, which often costs over €500, repair offers substantial cost savings. Moreover, it restores the vehicle’s full safety functionality, and the repaired unit remains TÜV‑compliant.

By restoring the original component, the vehicle’s original configuration is preserved. This means that, after installation, extensive re‑coding or programming at the workshop is usually unnecessary.

Providers with many years of experience can draw on expertise gained from over 20,000 successful repairs, ensuring high quality and reliable restoration of all safety functions. A 12‑month warranty is also provided on the repair.

How Is Control Unit 1480105080 Professionally Repaired?

Professional repair at Airbag24 includes precise electronic diagnostics, clearing crash data, fixing defective components, and final recalibration. Each unit is thoroughly tested to ensure full functionality equivalent to that of a new part.

After submitting your unit to Airbag24, the repair follows a proven process. First, an initial inspection is carried out to verify the reported fault. Technicians then analyze the circuit board and memory chips.

The core of the repair involves erasing stored crash data and resetting the memory. If electronic components have been damaged by overvoltage or other factors, they are professionally replaced. Following the repair, recalibration takes place, along with the installation of vehicle-specific software.

A final functional test ensures that the control unit operates flawlessly once again and correctly activates all safety functions. You receive a 12-month warranty on the completed repair.

What shipping options are available?

For fast and convenient processing, you can send your control unit to us free of charge or arrange a convenient UPS pickup from your preferred location. Return shipping is equally flexible, offered via UPS Standard (free), Express, cash-on-delivery, or self-collection.

For outbound shipping, you have two convenient options: you can ship the package yourself at no cost, or use the UPS pickup service, which collects the package directly from your home or workshop.

When returning the repaired control unit, we offer the following options:

Free UPS Standard shipping

UPS Express shipping

UPS Standard shipping with cash-on-delivery

UPS Express shipping with cash-on-delivery

Self-collection at our premises