Airbag control unit with part number 208055

What is the function of Airbag Control Unit 208055?

The airbag control unit with part number 208055 serves as the central control module for the occupant protection system in models such as the Fiat Tipo (3rd Gen) and Chrysler Neon 356. It processes signals from crash sensors to precisely and promptly deploy airbags and seatbelt pretensioners in the event of a collision, ensuring passenger safety.

The device continuously monitors all relevant components of the system, ranging from impact sensors at the front and sides of the vehicle to seat occupancy mats and seatbelt buckles.

Its primary task is to evaluate this sensor data in real time. Using predefined algorithms, it determines whether a crash has occurred and which restraint systems—such as front or side airbags—need to be activated.

Why does Airbag Control Unit 208055 fail?

The most common cause of failure for control unit 208055 is the storage of crash data after an accident. For safety reasons, this data locks the system and requires professional reset. Less frequently, hardware defects—such as circuit board fractures caused by vibrations or internal component failures—can lead to complete system failure.

Following a collision, even minor ones, the control unit irrevocably writes crash data into its internal memory. This results in deactivation of the airbag system and the SRS warning light remaining constantly illuminated. A simple reset via a diagnostic tool is then no longer possible.

In addition to this software-based lockout, physical damage may also occur. Severe vibrations or the impact energy of a crash can cause hairline cracks on the circuit board or defective solder joints, impairing communication or functionality.

However, before removing the control unit, it’s crucial to rule out external sources of error. Faulty cables, connectors under the seats, or malfunctioning seatbelt buckles can produce similar symptoms and should first be inspected by a qualified workshop.

How do you recognize a defect in Control Unit 208055?

A defective Airbag Control Unit 208055 almost always manifests as a permanently illuminated airbag or SRS warning light on the instrument panel. Additionally, diagnostic tools may fail to establish communication with the control unit, or specific fault codes such as B1111 (control unit defective) may be read.

The primary and unmistakable symptom is the active airbag warning light. It does not extinguish after starting the engine, indicating a critical fault in the safety system and resulting in a significant deficiency during vehicle inspection.

Another clear sign is when the workshop’s diagnostic equipment can no longer access the control unit. This refusal to communicate points to a severe internal fault, often triggered by stored crash data or hardware damage.

The fault memory may contain specific codes directly linked to the control unit. Error code B1111 is a typical indication of an internal defect within the control unit itself.

In which vehicles is Control Unit 208055 installed?

The airbag control unit with part number 208055 is specifically used in vehicles manufactured by the Stellantis Group. It is primarily found in the third-generation Fiat Tipo (Type 356), as well as in the identical Chrysler Neon (Type 356) and its facelift model. Airbag24 offers professional repair services for these models.

At Airbag24, we repair part number 208055 for the following specific vehicle models and series:

Fiat:

Tipo (3rd Generation, Type 356, model years 2016–2021)

Chrysler:

Neon (Type 356, model years 2016–2020)

Neon Facelift (Type 356, from 2020 onward)

Since the Fiat Tipo and Chrysler Neon share the same technical platform, they utilize many common components—including this specific airbag control unit.

How is Control Unit 208055 professionally repaired?

At Airbag24, Control Unit 208055 undergoes a standardized repair process. Following an initial inspection, stored crash data is erased using software. Next, the hardware is examined for any physical damage. Upon successful testing, the unit is returned with a 12-month warranty.

The process begins with a thorough diagnosis of the submitted unit. Specialized software reads the internal memory to identify crash data and determine the exact fault status.

The main step involves a professional reset, during which crash data is securely and completely removed, restoring full functionality and allowing the vehicle to recognize the unit as fault-free. In over 95% of cases, this is the necessary corrective action.

At the same time, a visual inspection of the circuit board is carried out to identify potential hardware damage such as cracks or cold solder joints. If necessary, affected components are professionally repaired.

Once the repair is complete, the control unit undergoes a functional test. Only after all tests have been passed is it approved for return shipment. After reinstalling it in the vehicle, you simply need to clear the vehicle’s fault memory.

Is repairing control unit 208055 worthwhile?

Yes, repairing control unit 208055 is highly cost-effective. Compared to a new part, which often costs between 400 and 500 euros, repairs can save up to 80% of the expense. Moreover, the repaired unit is immediately ready for use and does not require time-consuming re-coding in the vehicle.

The biggest advantage lies in the substantial cost savings. While a new original part can significantly strain your workshop budget, refurbishment offers an affordable alternative without compromising safety or functionality.

A repaired control unit retains its original vehicle coding. This means it can be easily reinstalled (plug-and-play) after repair, eliminating the need for costly and time-consuming programming at an authorized service center.

With a 12-month warranty on the completed repair, refurbishment provides a secure and reliable solution to restore your airbag system to full working order.

What shipping options does Airbag24 offer?

For repairing your control unit, Airbag24 provides flexible and secure shipping options. You can either send the defective part yourself free of charge or arrange a convenient UPS pickup at your preferred location. Returns are also handled via UPS, with your choice of free standard shipping or expedited express delivery.

Outbound shipping: You have options. Safely pack your removed control unit and ship it to us yourself. Alternatively, you can use our portal to schedule a UPS pickup, which will collect the package conveniently from your home or workshop.

Return shipping: After successful repair, we promptly ship your control unit back to you. By default, we use free UPS standard shipping.

For urgent cases, additional options are available: UPS express shipping for faster delivery, as well as the option to combine both standard and express shipping with cash-on-delivery. Self-collection at our workshop is also possible.