Airbag control unit with part number 25924679

What is the function of Airbag Control Unit 25924679?

The airbag control unit with part number 25924679 is the central Airbag Sensing Diagnostic Module (SRS SDM) for the Chevrolet Traverse. It is responsible for monitoring and controlling the entire occupant protection system. In the event of a crash, it processes data from the impact sensors and deploys the airbags and seatbelt pretensioners.

As an OEM component, this control unit is precisely tailored to the vehicle architecture of the first-generation Chevrolet Traverse (including the facelift model). Its primary task is to continuously monitor the status of all safety‑related components, such as airbags, seatbelts, impact sensors, and the clock spring.

In the event of a collision, the module determines within milliseconds which restraint systems need to be activated to provide optimal protection for occupants. After a deployment event, the device permanently stores so‑called crash data in its internal memory (EEPROM), which results in the system being locked and the airbag warning light illuminating.

Why does Airbag Control Unit 25924679 fail?

The most common cause of failure for control unit 25924679 is the storage of crash data after a collision, which locks the module. Additionally, electronic faults in internal components—such as the processor (MCU) or the memory chip (EEPROM)—can occur, leading to malfunctions and an illuminated warning light even without a crash.

Storing crash data after an accident is a designed safety feature. The module enters a locked state to prevent unintended activation following the event. This condition can only be resolved through a professional reset of the internal memory. Simple replacement is often not feasible, as the module is specifically programmed to match the vehicle’s VIN.

Even without a crash, faults can arise. Common causes include issues in the SRS system’s peripherals, such as defective wiring, faulty seatbelts, impact sensors, or the clock spring. These external problems can trigger internal malfunctions in the control unit, requiring component‑level repairs.

How do you recognize a defect in Control Unit 25924679?

The clearest symptom of a defect in control unit 25924679 is a continuously lit or flashing airbag warning light on the instrument cluster. Additionally, during an OBD diagnostic scan, the control unit may become unreachable or display specific error codes indicating an internal fault.

An illuminated airbag indicator is a clear warning that the entire restraint system is inoperative. If another crash occurs, the vehicle will fail to deploy airbags and seatbelt pretensioners. Ignoring this warning poses a significant safety risk.

In a specialized workshop, diagnostics often reveal that communication with the airbag control unit has been lost. Alternatively, error codes may indicate “internal control unit fault” or “crash data stored,” making replacement or professional repair unavoidable.

In which vehicles is Control Unit 25924679 used?

Part number 25924679 is a specific OEM airbag control unit exclusively fitted to the first-generation Chevrolet Traverse. This includes both the original models and the later facelift version, ensuring precise compatibility with this vehicle type.

At Airbag24, repairs for part number 25924679 are verified for the entire first generation of the Chevrolet Traverse, covering the following model variants:

Chevrolet Traverse (1st Generation), model years 2008–2013

Chevrolet Traverse (1st Generation Facelift), model years 2013–2017

As this is a VIN‑specific component, compatibility is limited to this particular vehicle series. Use in other vehicles or brands is not intended.

How is Control Unit 25924679 repaired?

Professional repair of control unit 25924679 takes place at the electronic level. Following a thorough diagnosis, either the stored crash data is erased from the memory (EEPROM/FLASH) using specialized tools, or defective microcomponents—such as processors (MCU)—on the circuit board are replaced. The module is then thoroughly tested to ensure full functionality.

Once the removed control unit arrives at Airbag24, it undergoes a meticulous repair process. First, an initial analysis is conducted to pinpoint the exact cause of the fault, distinguishing between stored crash data and a genuine hardware defect.

For stored crash data, a ‘dump repair’ is performed using specialized programming tools that also work with secured Motorola MCUs (e.g., the HC908 series). This process reads out the relevant memory areas, removes the crash information, and writes the cleaned dataset back, restoring the module to its factory settings.

If an electronic fault is present, our technicians identify the defective component and replace it. Following repair, each control unit undergoes a thorough final inspection to ensure flawless functionality. We provide a 12-month warranty on all repairs.

What shipping options are available at Airbag24?

You can either send your defective control unit to us yourself or arrange a convenient UPS pickup from your preferred location. For returns, we offer free standard UPS shipping as well as optional UPS Express shipping. Both options are also available with cash-on-delivery, and self-collection is possible as well.

For sending your unit to Airbag24, you can choose to ship it directly to us yourself or request a UPS pickup when placing your repair order.

After repair, we return the control unit using the method you selected. Standard UPS shipping is free of charge. Additional options such as UPS Express or cash-on-delivery can be chosen during the ordering process. On-site pickup is also available.