Airbag control unit with part number 28394001

What is the function of Airbag Control Unit 28394001?

The airbag control unit with part number 28394001 is the central control module for the passive safety system in the Hyundai Tucson NX4 (from 2020 onwards). It processes data from crash sensors, determines whether to deploy airbags and seatbelt pretensioners, and stores relevant event data, especially after a collision.

As a model-specific component, it is precisely tailored to the vehicle architecture of the Tucson NX4 and its facelift variant. Its primary task is the continuous monitoring of all connected sensors and actuators of the restraint system to ensure occupant safety in an emergency.

In the event of a collision, the control unit analyzes the severity of the impact within milliseconds and activates the necessary safety components. Without a fully functional control unit, the entire airbag system is disabled, which is indicated by a permanent warning light in the cockpit.

Why does Airbag Control Unit 28394001 fail?

The most common cause of failure for control unit 28394001 is stored crash data following an accident, which locks the device. Other causes include internal electronic malfunctions or communication errors that result in a continuously illuminated airbag warning light. External factors such as undervoltage or moisture can also trigger faults.

After a crash—even one involving low impact energy—the control unit stores what is known as a “crash data record.” This entry is permanent and cannot be erased using standard diagnostic tools. The system then reports a persistent fault and remains inactive for safety reasons.

Independently of accidents, internal defects on the circuit board may also occur. Faulty components or issues with the internal memory (EEPROM) can prevent the control unit from processing valid data or communicating with other systems in the vehicle.

Occasionally, causes external to the control unit—such as a weak vehicle battery—can lead to error entries that mistakenly point to a defective control unit. Similar fault patterns are also observed with related part numbers like 95910-CZ000, 95910-D7130, or 95910-4H380.

How do you recognize a defect in Control Unit 28394001?

A defect in Control Unit 28394001 primarily manifests as a permanently lit or flashing airbag warning light in the instrument cluster. Additionally, access to the control unit via diagnostic equipment is often impossible, and error codes stored in the fault memory cannot be cleared.

The most noticeable sign is the red airbag warning light. It does not turn off after starting the engine, signaling to the driver that the restraint system is not operational. In the event of another collision, the airbags would fail to deploy.

Another clear symptom is the lack of communication. If a workshop attempts to read the fault memory through the OBD interface, no response is received from the airbag control unit. This complicates diagnosis and suggests a serious internal malfunction.

Even when communication is possible, errors such as “crash data stored” or “internal error” cannot be reset using standard diagnostic tools. The fault remains active until the control unit undergoes professional repair.

In which vehicles is Control Unit 28394001 installed?

The airbag control unit with part number 28394001 is a specific component for the fourth generation of the Hyundai Tucson. It is used in the NX4 model from the 2020 model year onward, as well as in the revised facelift version starting in 2023. Repair is possible for both variants.

At Airbag24, we repair Control Unit 28394001 for the following Hyundai models:

Hyundai Tucson (NX4 generation) / Model years 2020–2023

Hyundai Tucson (NX4 facelift generation) / Model years from 2023 onward

Is repairing 28394001 worthwhile?

Yes, repair is the most cost-effective solution. Compared to a new unit, which can cost up to €750, refurbishment offers savings of up to 90%. The original control unit is restored, typically requiring no re-coding and backed by a 12-month warranty.

The biggest advantage is the significant cost reduction. While a new control unit is expensive from the manufacturer, repair provides a budget-friendly yet fully functional alternative to restore full safety.

Since the vehicle’s original part is retained, extensive reprogramming or coding of the vehicle is usually unnecessary. After installation and clearing the fault memory, the repaired control unit can be used immediately.

A professional repair is safe, TÜV‑compliant, and restores the airbag system to full functionality. All repairs at Airbag24 come with a 12‑month warranty.

How does the repair of control unit 28394001 work?

At Airbag24, the repair focuses on eliminating the root cause of the fault—typically by clearing the stored crash data. After removal and shipment, the unit is analyzed, its data is reset using specialized software, and it is thoroughly tested for full functionality. A 12‑month warranty applies to the repair.

The process begins with the proper removal of the control unit from the vehicle’s center console, ensuring the battery has been disconnected beforehand. The removed unit is then securely packaged and sent to Airbag24.

Upon receipt, a detailed diagnosis is performed. The core of the repair involves restoring the internal memory to factory settings, permanently erasing all stored crash information.

If additional internal defects are identified during analysis, they will also be addressed. Following successful refurbishment, the control unit undergoes a final test to confirm proper operation.

After reinstallation in the vehicle, the general fault memory must be cleared. The repair restores the airbag system’s full safety and TÜV compliance.

What shipping options are available at Airbag24?

Airbag24 offers flexible shipping methods for hassle‑free processing. You can send the control unit yourself at no cost or arrange a convenient UPS pickup. For returns, both free UPS standard shipping and faster UPS express shipping are available, each with a cash‑on‑delivery option.

For outbound shipments, you have two choices: either mail the package to us yourself or use our convenient UPS pickup service, which collects the package directly from your location.

After the repair, return shipping is handled according to your preference. UPS standard shipping is free of charge; if you need it expedited, UPS express shipping is available.

Both standard and express shipping can be combined with “cash on delivery.” Alternatively, you may choose to pick up the repaired control unit in person at our facility.