Airbag control unit with part number 285001157

What is the Airbag Control Unit 285001157?

The part number 285001157, also known as Bosch 0 285 001 157, is an airbag control unit (SRS module) installed in various Renault models such as the Clio I/II and Renault 19 II. Its primary function is to monitor the restraint system and precisely deploy airbags and seatbelt pretensioners in the event of a crash.

As the central control unit of the passive safety system, this module processes signals from crash sensors distributed throughout the vehicle. In the event of a collision, it determines within milliseconds which restraint devices—such as front airbags or seatbelt pretensioners—should be activated to provide optimal protection for occupants.

The electronics developed by Bosch ensure that the system remains continuously operational and performs a self-test each time the vehicle is started. Detected faults are indicated to the driver via the airbag warning light.

Why does the control unit 285001157 fail?

Defects in the 285001157 control unit typically arise from stored crash data in its internal memory (EEPROM/Flash) after an accident, preventing reuse. Other causes include electronic component failures on the circuit board, such as faulty voltage regulators, capacitors, MOSFETs, or damage caused by corrosion and mechanical impacts.

A common cause of apparent malfunction is the storage of crash data. After an airbag deployment, the control unit locks itself for safety reasons and must be professionally reset. This condition is not a typical hardware failure but rather a manufacturer‑imposed lockout.

Electronic failures on the circuit board are also frequent. These include malfunctions of SMD components like voltage regulators essential for stable power supply, as well as defective capacitors and MOSFETs. Communication interfaces to the microcontroller can also degrade due to aging or voltage spikes.

External factors such as moisture ingress can lead to corrosion on the circuit board and at connector contacts. Mechanical shocks, for example from an accident, may damage traces or solder joints, impairing device functionality. The part number is also listed as Bosch 0285001157.

How do you recognize a defect in the 285001157?

A defective 285001157 airbag control unit typically manifests as a permanently illuminated airbag warning light on the instrument cluster. Often, communication with the control unit via a diagnostic tool becomes impossible, or specific fault codes such as B1000 (communication error) or DTCs related to seatbelt pretensioners appear.

The most obvious symptom is the persistently lit airbag warning light (SRS light). It does not turn off after starting the vehicle, indicating a permanent, safety‑critical system fault.

Another clear sign is when a professional workshop cannot establish communication with the airbag control unit using a diagnostic device. The module fails to respond to queries, complicating fault diagnosis and often pointing to an internal issue within the control unit itself.

Following an accident where airbags or seatbelt pretensioners have deployed, the control unit locks itself. Even if no visible damage is present, the system reports an error because crash data remains stored, preventing reactivation.

In addition, specific fault codes may be logged in the error memory. Common entries include communication errors (e.g., B1000) or model‑specific DTCs such as DTC92B697, directly indicating a problem either within the control unit itself or in the components it controls.

In which models is the 285001157 installed?

The 285001157 airbag control unit (Bosch 0 285 001 157) was primarily used in various Renault vehicles, notably the Renault Clio I and Clio II series, as well as the Renault Clio Van II and Renault 19 II. Repairs are available for all these models.

At Airbag24, we repair the control unit with part number 285001157 for the following models:

Renault Clio I (1990–1998)

Renault Clio II (1998–2012)

Renault Clio Van II

Renault 19 II

How is the 285001157 airbag control unit professionally repaired?

Professional repair of the 285001157 control unit involves a detailed diagnosis, during which fault codes and stored crash data are read out. This is followed by restoration work ranging from a simple crash-data reset to replacing defective SMD components. After a final functional test, the unit is returned with a 12‑month warranty.

Upon submission to Airbag24, the control unit undergoes a standardized repair process to ensure safe and reliable operation.

First, an initial inspection is performed, during which the unit is visually checked for external damage and fault codes are read out. This allows us to determine whether the issue stems from stored crash data or an actual hardware defect.

The most common repair step is erasing the crash data. In this process, the relevant data records in the control unit’s EEPROM or flash memory are professionally reset, restoring the module to full functionality.

In cases of electronic faults, defective components such as voltage regulators, capacitors, or damaged circuit traces are repaired by desoldering and replacing them. Only high-quality replacement parts are used throughout this process.

Following the repair, each control unit undergoes a comprehensive functional test. We verify that communication with diagnostic tools operates flawlessly and that no fault codes remain stored. We provide a 12-month warranty on every repair.

What shipping options are available at Airbag24?

You can choose free shipping when sending your control unit to Airbag24, or drop it off in person. Alternatively, we offer convenient UPS pickup at your preferred location. For return shipping, you have access to free standard and paid express options, both available with cash-on-delivery.

Shipping to Airbag24:

You can securely package your removed control unit and send it to us at no cost. Alternatively, you may opt to deliver the unit to our facility in person. For maximum convenience, we also provide UPS pickup at a location of your choice.

Return shipping to you:

After successful repair, you can select from several return shipping options. UPS standard shipping is free of charge. If you require faster delivery, you can choose UPS express shipping. Both options are also available with cash-on-delivery. Of course, you may also pick up your repaired control unit directly from our premises.