Airbag control unit with part number 285001925

What is the function of Airbag Control Unit 285001925?

The airbag control unit with part number 285001925 is the central safety module in the Hyundai Starex TQ. It continuously analyzes data from the vehicle’s sensors and is responsible for deploying the airbags and seatbelt pretensioners within milliseconds in the event of a crash, thereby protecting the occupants.

As the heart of the passive safety system, this module processes signals from acceleration and yaw rate sensors. Based on this information, it makes the critical decision about whether and which restraint systems need to be activated.

The proper functioning of this control unit is therefore essential for vehicle safety and is constantly monitored by the system. A failure will inevitably result in the deactivation of the entire airbag system.

Why does Airbag Control Unit 285001925 fail?

A common cause of failure for control unit 285001925 is the storage of crash data after an accident, which blocks further functionality. Other causes include internal electronic malfunctions, damage caused by water ingress or moisture, as well as harm resulting from improper repair attempts.

After an accident—even a minor impact—the unit permanently stores crash data. This lockout feature ensures safety by preventing further operation until the unit is professionally reset or replaced.

Electronic malfunctions in internal components can also lead to total failure or erratic behavior. Such defects often occur without any external influence and are part of the normal aging process of electronics.

Another significant source of failure is moisture. Water damage—such as from leaks in the vehicle body—can cause corrosion on the circuit board and destroy sensitive electronics.

How do you recognize a defect in 285001925?

A defective control unit 285001925 typically manifests itself unmistakably through a continuously illuminated or intermittently flashing airbag warning light on the instrument panel. Often, a workshop using its diagnostic tool cannot establish communication with the control unit to read out the fault memory.

The most obvious sign of a defect is the activated airbag warning light. It fails to turn off after starting the vehicle, indicating a serious issue within the safety system that requires immediate inspection.

Another clear symptom is the lack of communication. If the diagnostic tool reports that the control unit is not responding, this points to either a complete internal failure or a severe malfunction in the communication electronics.

The fault memory may also contain specific error codes indicating internal software faults, communication issues with other vehicle components, or problems with the device’s coding.

In which vehicles is control unit 285001925 installed?

The airbag control unit with part number 285001925 was specifically developed for the Hyundai Starex. At Airbag24, we repair this module for both the TQ series and the corresponding facelift model, restoring full functionality to the safety system.

At Airbag24, we offer professional repairs for part number 285001925 in the following specific vehicle models:

Hyundai: Starex TQ (model years 2008–2018) and Starex TQ Facelift (model years 2018–2020).

How does the repair process work at Airbag24?

At Airbag24, the repair of control unit 285001925 follows a certified procedure. Upon receipt, the unit is analyzed, stored crash data is erased using specialized software, and internal faults are corrected. Following a final functional test, you receive a fully operational control unit backed by a 12-month warranty.

Before removing the control unit, if possible, the fault memory should be read out and the error codes noted. This information assists technicians during diagnosis. After removal, please ship the unit securely packaged to our laboratory.

Upon arrival at Airbag24, our technicians conduct a thorough analysis. The core of the repair involves erasing crash data from the internal memory and correcting any software errors, returning the unit to its original factory condition.

Subsequently, the repaired control unit undergoes comprehensive functional testing to ensure it communicates flawlessly with the vehicle again and correctly controls all safety functions. We provide a 12-month warranty on every repair performed.

What shipping options are available at Airbag24?

For sending your control unit to Airbag24, you can either ship it to us yourself free of charge or arrange a convenient UPS pickup. For return shipping, we offer flexible options, including free standard UPS delivery, various express services, and the choice of cash-on-delivery or self-collection.

Return shipping to Airbag24: You can choose to send your removed control unit to us yourself or arrange a UPS pickup from your preferred address through our portal.

Free return shipping: Standard UPS delivery, with a typical transit time of 1–3 business days within Germany, is free of charge for you.

Express and additional options: If you need the component returned more quickly, UPS Express delivery (delivery in 1–2 business days) is available, as are both shipping methods with cash-on-delivery. Alternatively, you can also pick up the repaired control unit in person at our facility.