Airbag control unit with part number 28556-85F00

What is the function of Airbag Control Unit 28556-85F00?

The airbag control unit with part number 28556-85F00 is the central control module for the occupant restraint system (SRS) in the Nissan Silvia S15. It continuously analyzes data from crash sensors to ensure precise, timely deployment of airbags and seatbelt pretensioners in the event of a collision, thereby safeguarding system safety.

As an OEM control unit (Original Equipment Manufacturer), it was specifically designed for the Nissan Silvia S15 model years 1999–2002 (also known as the Nissan 200SX). It serves as the brain of the entire restraint system.

The primary task of this unit is to process signals from acceleration and pressure sensors. Based on this data, it determines whether and which restraint systems—such as front airbags or seatbelt pretensioners—should be activated to provide optimal protection for occupants.

In addition, the control unit 28556-85F00 communicates continuously with other vehicle control modules, such as the engine control unit (ECU), to monitor system status and report onboard network faults.

Why does Airbag Control Unit 28556-85F00 fail?

The most common cause of failure for control unit 28556-85F00 is the storage of crash data after an accident. These “hard codes” permanently disable the unit’s functionality and cannot be cleared using standard diagnostic tools. Furthermore, defects in internal electronic components, such as the microcontroller, can lead to complete failure.

Following an airbag deployment, the unit irrevocably stores a crash data record. This is a manufacturer‑imposed safety measure that locks the device, preventing further use without professional repair. This condition results in the airbag warning light remaining illuminated at all times.

Another cause is board‑level damage. In particular, the microcontroller chip (e.g., type 68HC912B32) may fail, leading to communication issues or total system breakdown. Such hardware malfunctions often trigger specific fault codes.

Typical fault codes indicating a defect in control unit 28556-85F00 include B1000 and B1049 (both pointing to an internal control unit error), as well as B1100, B1101, and the U1000 communication error.

How do you recognize a defect in control unit 28556-85F00?

A defect in control unit 28556-85F00 primarily manifests as a persistently illuminated airbag warning light (SRS lamp) in the instrument cluster. Often, communication with the control unit via an OBD diagnostic tool becomes impossible, or specific fault codes such as B1000 or B1049 are stored.

The clearest indication is the active SRS warning light that fails to extinguish after the engine starts. This signals a critical fault in the restraint system, rendering the airbags unable to deploy in the event of a crash.

In the workshop, the defect is frequently revealed when the diagnostic tool cannot establish a connection to the airbag control unit. The unit no longer responds to queries, making further fault analysis within the vehicle impossible.

In some cases, accompanying symptoms may also appear, including a malfunctioning clock in the cockpit, complete device failure upon heating, or a flashing engine check light due to disrupted communication with other control units.

In which vehicles is control unit 28556-85F00 installed?

The airbag control unit with part number 28556-85F00 is exclusively designed for a specific vehicle model. It is the verified OEM reference for the Nissan Silvia S15 series, produced between 1999 and 2002 and known in some markets as the Nissan 200SX.

At Airbag24, we professionally repair control unit 28556-85F00 for the following model:

Nissan Silvia S15 (model years 1999–2002)

Due to the rarity of this vehicle and the fact that new parts are often unavailable or extremely expensive, repair represents the most economical—and frequently the only—solution to restore full functionality of the airbag system.

How is control unit 28556-85F00 repaired?

After sending the removed control unit to Airbag24, our technicians perform a thorough analysis. The repair includes professional erasure of stored crash data, replacement of defective electronic components on the circuit board, and a final functional test to ensure full operational readiness.

The process ideally begins with a diagnosis at your workshop to rule out other potential causes of failure, such as faulty sensors or wiring issues. A detailed fault report should be attached to the defective control unit.

At Airbag24, the unit is first thoroughly inspected. The core of the repair process involves erasing the internal “hard codes” (crash data) and restoring the device to its factory settings. If electronic components such as the microcontroller are defective, they are expertly replaced.

Following successful refurbishment, the control unit undergoes a comprehensive quality inspection. You will receive a fully functional, plug-and-play component backed by a 12-month warranty.

What shipping options does Airbag24 offer?

You can either ship your control unit to Airbag24 at no cost yourself or arrange a convenient UPS pickup. For returns, we also provide flexible options, including free standard UPS shipping, faster express delivery, and cash-on-delivery for maximum security.

Shipping to Airbag24: You may send the package at your own expense or request a UPS pickup at your preferred location, such as your home or workshop.

Free return shipping: Your repaired control unit is returned free of charge via standard UPS shipping as a default option.

Optional return services: For quicker delivery, you can choose UPS express shipping. Both standard and express shipping can additionally be combined with cash-on-delivery. Alternatively, you can arrange for personal collection directly from our facility.