Airbag control unit with part number 315A19AB701

What is the function of the airbag control unit 315A19AB701?

The airbag control unit 315A19AB701, also known as ACSM (Advanced Crash Safety Module), is the central control unit of the restraint system safety architecture in BMW models such as the M3 G80. It collects and analyzes signals from crash sensors and seatbelt pretensioners, determines whether to deploy the airbags in the event of a collision, and stores relevant crash data.

Technically, this unit serves as the brain of the passive safety system. It continuously monitors all connected components, including airbags, seatbelt pretensioners, and seat occupancy detection.

In the event of an accident, acceleration sensor data is evaluated within milliseconds. Based on the severity and type of impact, the control unit decides which restraint devices—such as front airbags, side airbags, or seatbelt pretensioners—are deployed and at what stage.

Following a deployment event, so‑called crash data or event data is permanently stored in the module’s memory. This data often prevents further operation of the control unit and results in a warning light that remains illuminated, even after the airbags have been replaced.

Why does the control unit 315A19AB701 fail?

The most common reason for sending in the control unit 315A19AB701 is the retention of crash data after an accident, which blocks its reuse without repair. Other causes include internal electronic defects in components such as MOSFETs or capacitors, leading to communication issues or persistently stored fault codes.

After a collision in which airbags or seatbelt pretensioners have deployed, the control unit becomes internally locked. This lock is a safety feature and can only be lifted through a targeted intervention on the circuit board, known as “resetting.” Simply clearing the fault memory via diagnostics is not sufficient here.

Electronic components on the circuit board can also fail without any accident. Faulty solder joints, defective voltage regulators, or damaged SMD fuses can cause internal malfunctions, which may manifest as a lit airbag warning light or complete loss of communication with the diagnostic tool.

It is important to note that there are closely related variants such as 5A19AB7, 65775A19AB7, A3C00184105, or ACSM5. When replacing or repairing, the exact part number as well as the hardware and software revision must match, since vehicle assignment and coding are specific.

How do you recognize a defect in the 315A19AB701?

A defect in the airbag control unit 315A19AB701 primarily manifests as a permanently illuminated airbag warning light in the instrument cluster. Additional symptoms include the inability to communicate with the control unit using a diagnostic tool, or specific internal fault codes that cannot be cleared—often appearing sporadically right after starting the engine.

The clearest indication is the red airbag warning light that fails to turn off after the vehicle is started. This signals a critical fault in the restraint system that could compromise occupant safety.

Another clear symptom is when the workshop’s diagnostic tool cannot establish a connection with the airbag control unit. The module does not respond to requests, indicating a severe internal hardware or power supply issue.

Fault codes such as “internal control unit error” or “component defective” are frequently stored in the fault memory. Even after an accident and replacement of all deployed components, the warning light remains active because the stored crash data prevents reactivation of the system.

In which vehicles is the control unit 315A19AB701 installed?

The airbag control unit with part number 315A19AB701 is specifically designed for BMW’s sporty G‑platform. At Airbag24, we primarily repair this unit for the BMW M3 of the G80 series, produced from model year 2020 onward. Compatibility is tightly tied to this particular model.

At Airbag24, we have successfully matched and repaired this part number for the following model:

BMW: M3 G80 sedan (from 2020)

How is the 315A19AB701 professionally repaired?

Repairing the control unit 315A19AB701 at Airbag24 is a multi‑step electronic process. Following a thorough initial inspection and diagnostic evaluation, stored crash data is erased according to the nature of the fault, defective hardware components on the circuit board are replaced under ESD‑controlled conditions, and then the software parameters are reset to the vehicle‑specific configuration.

Upon submission to Airbag24, each control unit first undergoes a visual and electrical inspection. Connectors, the circuit board, and individual components are checked for mechanical damage, moisture, or signs of fire, while internal power supplies are measured.

Subsequently, the module is read using specialized diagnostic equipment to identify fault codes and, most importantly, stored crash data. This analysis determines the next steps in the repair process.

The actual repair is performed at the component level. Defective MOSFETs, capacitors, or SMD fuses are desoldered and replaced with new ones. For any stored crash data, the control unit’s memory is professionally reset, ensuring full functionality once again.

Finally, a final test is conducted on the vehicle bus (CAN), simulating communication and the activation of restraint systems. We provide a 12-month warranty on all repairs.

What shipping options does Airbag24 offer?

To send your defective control unit to Airbag24, you can either ship it to us yourself free of charge or arrange a convenient UPS pickup at your preferred location. For the return shipment, we also offer flexible options, including free standard UPS shipping, express shipping, as well as cash-on-delivery or self-collection.

For the outbound shipment, you have two convenient choices: you can send the package to us yourself or schedule a UPS pickup that collects the control unit directly from your home or workshop.

After successful repair, the return shipment is typically handled as free standard UPS shipping.

If faster delivery is required, you can opt for UPS express shipping. Both shipping methods are also available as cash-on-delivery services. Alternatively, you may choose to pick up the repaired control unit in person from our facility.