Airbag control unit with part number 338729

What is the function of Airbag Control Unit 338729?

The airbag control unit with part number 338729, also known under reference 937757, is the central control unit for the passive safety system in the Ferrari 812 GTS F152M. It processes data from crash sensors and decides whether to deploy airbags and seatbelt pretensioners in the event of a collision.

As the “brain” of the restraint system, this component continuously monitors all relevant sensors in the vehicle, including acceleration sensors at the front, on the sides, and inside the control unit itself. As soon as sensor data indicates a collision requiring deployment, the control unit 338729 sends ignition pulses to the appropriate airbags and seatbelt pretensioners within milliseconds.

In addition to its deployment function, the unit is responsible for self-diagnosing the entire system. It constantly checks the functionality of all connected components and reports any malfunctions to the driver via the airbag warning light in the cockpit.

Why does Airbag Control Unit 338729 fail?

The most common reason for repairing control unit 338729 is the storage of crash data after an accident, which locks the system. Other causes include internal electronic faults leading to communication failures, as well as external factors such as water damage or corroded connectors.

After a collision in which the airbags have deployed, the control unit permanently stores accident-related data in its internal memory. This information—known as “crash data”—locks the unit for safety reasons and disables the airbag system to prevent unintended re‑deployment. This lock can only be lifted through a professional reset.

Electronic malfunctions are another frequent source of failure. These may involve power supply issues, defects in components from manufacturers like Bosch, Delphi, or TRW, or complete loss of communication. Error codes such as 93F5, 93F7, or 93F9—commonly seen in similar systems—can indicate such internal hardware problems.

Additionally, external influences like moisture can cause water damage to the circuit board or corrosion at connector contacts. Especially in vehicles like the Ferrari 812 GTS, where the control unit is installed in the rear, connections should always be checked for tightness and cleanliness.

How do you recognize a fault in Control Unit 338729?

A defective Airbag Control Unit 338729 primarily manifests as a permanently illuminated airbag warning light on the instrument cluster. Other typical symptoms include a lack of communication with diagnostic equipment and a resulting blockage of the entire safety system that cannot be reset.

The most obvious sign is the continuously lit airbag indicator light. It does not turn off after starting the vehicle, signaling a serious, safety‑relevant system error.

Another clear symptom occurs when a workshop using diagnostic equipment cannot establish communication with the airbag control unit. The unit fails to respond to requests, making it impossible to read or erase error codes.

Due to stored crash data or an internal defect, the entire safety system becomes locked. The vehicle reports an unremovable fault, and airbag functionality remains completely disabled until the control unit is repaired or replaced.

In which models is Airbag Control Unit 338729 installed?

The airbag control unit with part number 338729 and alternative reference 937757 is specifically designed for the Ferrari 812 GTS supercar of the F152M series. It was used in vehicles produced between 2019 and 2024.

At Airbag24, we offer professional repair services for this specific control unit for the following model:

Ferrari 812 GTS F152M (2019–2024)

How does the repair of Control Unit 338729 proceed?

Repair at Airbag24 begins with a professional analysis of the submitted Control Unit 338729 to precisely identify the root cause of the fault. Crash data is then erased, or defective components are replaced. A final functional test ensures full operability before the unit is returned.

Before removal, a specialized workshop should verify whether the fault lies definitively in the control unit to avoid unnecessary effort. Removal in the Ferrari 812 GTS often takes place in the rear, beneath a cover, requiring careful disconnection of all connectors. Please send the removed unit well‑packaged to Airbag24.

Upon receipt at Airbag24, our technicians perform a comprehensive diagnosis. Based on the fault pattern, repairs are initiated. If crash data is stored, the memory content is restored to factory settings. In cases of electronic defects, faulty components on the circuit board are identified and professionally replaced.

Each repair concludes with an extensive functional test on specialized test benches. This ensures that the control unit communicates flawlessly again and performs all functions correctly. Of course, you receive a 12-month warranty on the completed repair.

What shipping options does Airbag24 offer?

To send your control unit, you can deliver it yourself free of charge or use the convenient UPS pickup service from your preferred location. For the return shipment after repair, Airbag24 provides free UPS standard shipping as well as optional express and cash-on-delivery services to meet your needs.

For the outbound shipment, you have two convenient options: you can send the package to us at your own expense or bring it in person. Alternatively, you can arrange for UPS to pick it up at a location and date of your choice.

After successful repair, the following return shipping options are available:

Free UPS standard shipping (1–3 business days)

UPS express shipping (1–2 business days)

UPS standard shipping with cash on delivery (1–3 business days)

UPS express shipping with cash on delivery (1–2 business days)

In-person self-collection