Airbag control unit with part number 38910-68P50

What does the airbag control unit 38910-68P50 do?

The airbag control unit 38910-68P50 controls the restraint system (SRS) for Suzuki by evaluating the crash sensors and deciding in an accident whether airbags and seatbelt pretensioners are triggered.

The control works in the background and checks the system continuously. It reports faults via the airbag warning light in the instrument cluster.

After an accident, it stores crash data and locks itself.

Why does the control unit 38910-68P50 fail?

With the 38910-68P50, stored crash data is the most common cause, even when no airbag has deployed. An ordinary diagnostic tool cannot erase it. Further triggers are aged electronics, cold solder joints, moisture and voltage spikes.

The crash data remains in the unit until Airbag24 removes it during the repair.

Aged electronic components are a general cause that increases over the years. Solder joints can go cold over time, and moisture or corrosion at plug connectors disrupts the contact.

Voltage spikes, for example from a weak battery or jump-starting, place additional strain on the electronics. The exact cause is only shown by the check.

How can you tell that the 38910-68P50 is defective?

On the 38910-68P50, a defect shows through the airbag warning light in the instrument cluster, an error message or a diagnostic tool without connection. A fault memory that cannot be cleared confirms the suspicion.

• Airbag warning light permanently or intermittently on
• Error message in the instrument cluster
• Diagnostic tool finds no control unit
• Fault memory cannot be cleared

In this condition, airbags and seatbelt pretensioners may not be able to deploy in an emergency. A prompt check is therefore sensible.

Which vehicles is the 38910-68P50 fitted in?

You can check on the vehicle registration document whether your vehicle belongs to this group. The control unit 38910-68P50 is intended for Suzuki and fitted in these vehicles: Suzuki Baleno WB (2015-2022) and WB Facelift (from 2022).

The models are shown in the overview:

• Suzuki Baleno WB (2015-2022)
• Suzuki Baleno WB Facelift (from 2022)

Have the fault memory read out before removal. The result decides whether the control unit itself is defective or whether a plug or cable is the cause. Afterwards, compare the part number on the label with this page. That comparison only confirms that you have the right unit.

For the same vehicles, we also repair control units with the part numbers 38910M68PD1.

How does the repair of the 38910-68P50 work?

The first step is to have the fault memory read out and enclose the log with the control unit. Then disconnect the battery and only then remove the control unit 38910-68P50. Next, create the repair order online and send the well-packed unit.

Airbag24 checks the unit on the test bench, replaces defective components, erases the crash data and carries out a functional test. Processing usually takes 3–4 working days, after which your own unit returns to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 38910-68P50 get to Airbag24?

You send the control unit 38910-68P50 as a parcel, or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Enclose the printed repair order and pack the unit shock-resistant.