Airbag control unit with part number 38910-69PA0

What does the airbag control unit 38910-69PA0 do?

As the SRS control unit of Suzuki, the 38910-69PA0 coordinates the restraint technology. It evaluates the signals from the crash sensors, determines in an impact within milliseconds which airbags and seatbelt pretensioners are triggered, and checks the system constantly.

The unit displays faults via the airbag warning light in the instrument cluster.

If an accident has occurred, it stores the crash data and locks itself. The lock is lifted only by a repair.

Why does the control unit 38910-69PA0 fail?

For the 38910-69PA0, the most common cause is crash data stored in the unit after an accident, even if no airbag has deployed. Additional causes are aged components, cold solder joints, moisture on plugs and voltage spikes.

Crash data cannot be cleared with an ordinary diagnostic tool.

Besides this, other causes come into consideration:

• ageing of electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes from a weak battery or a jump start

How can you tell that the 38910-69PA0 is defective?

A permanent or intermittent lighting of the airbag warning light in the instrument cluster is an important sign that the 38910-69PA0 has a defect. Add to this a fault message, a fault memory that cannot be cleared, and a missing connection to the diagnostic tool. In an emergency, the airbags and seatbelt pretensioners may then fail to deploy.

The warning light is an unambiguous indication of the system. Take it seriously and have it checked.

A connection to the diagnostic tool that cannot be established is also among the signs you should watch for.

Which vehicles is the 38910-69PA0 fitted in?

The 38910-69PA0 is fitted in these vehicles: Suzuki Baleno WB (2015-2022) and WB Facelift (from 2022).

The vehicles known to us for this part number are listed here:

• Suzuki Baleno WB (2015-2022)
• Suzuki Baleno WB Facelift (from 2022)

Compare the part number on the label of the unit with this page, so that you have the correct unit in front of you. Have the fault memory read out beforehand, because only this log shows whether the control unit is defective or whether a line or a connector causes the fault.

For the same vehicles, we also repair control units with the part numbers 38910M68PD1.

How does the repair of the 38910-69PA0 work?

For the repair of the 38910-69PA0, first read out the fault memory and enclose the log. Then disconnect the battery and only afterwards remove the control unit. Then create a repair order online and pack the unit well.

At Airbag24, the unit is checked on the test bench, defective components are repaired, the crash data is erased and a function test follows. Afterwards your own unit is sent back to you.

Processing at Airbag24 usually takes 3–4 working days, and this covers only inspection, repair and testing.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 38910-69PA0 get to Airbag24?

You can send the 38910-69PA0 in as a parcel, or book a UPS collection for an extra charge. The return after the repair is made by UPS.

The printed repair order goes into the parcel as well. Pack the control unit shockproof so that it arrives undamaged.