Airbag control unit with part number 3T0 959 655 A

What is the function of the Airbag Control Unit 3T0 959 655 A?

The Airbag Control Unit 3T0 959 655 A is the central control module for the passive safety system in the Škoda Superb II (Type 3T). It continuously processes data from acceleration and seatbelt force sensors to precisely deploy airbags and pretensioners within milliseconds in the event of a crash.

This component ensures the proper functioning of all connected restraint systems, ranging from front airbags to side impact sensors. Acting as the brain of the entire system, it plays a critical role in occupant safety.

In addition, the control unit maintains continuous communication with other vehicle systems to monitor the status of all connected components—such as seat occupancy mats, belt tensioners, and crash sensors—and ensure their operational readiness.

Why does the Control Unit 3T0 959 655 A fail?

A common cause of failure for the 3T0 959 655 A control unit is the storage of crash data after an accident, which can prevent further functionality. Other causes include internal electronic malfunctions that lead to communication interruptions or incorrect fault codes, even when no crash has occurred.

Following a collision, the unit stores so‑called “crash data” in its internal memory—a safety measure designed to prevent reuse without professional inspection and reset. In many cases, this data cannot be cleared via the standard OBD2 diagnostic interface.

Internal component defects can also result in persistent error messages. These often affect specific circuits—for example, those related to side impact sensors—or trigger general internal faults that prevent the system from passing self‑diagnostics.

Variants of this part number, such as 3T0 959 655 D and 3T0 959 655 C, may exhibit similar symptoms and are likewise subject to these failure modes.

How do you recognize a defect in the 3T0 959 655 A Control Unit?

A defective 3T0 959 655 A Airbag Control Unit typically manifests as a permanently illuminated airbag warning light on the instrument cluster. Often, communication with the diagnostic tool is also lost, or non‑erasable internal fault codes remain stored in the fault memory.

The most obvious symptom is the airbag warning light, which fails to turn off after starting the vehicle, indicating a critical system error.

In some cases, the engine check light may additionally flash during ignition, signaling a severe communication issue between the vehicle’s central control units.

Another clear indication is when diagnostic tools cannot establish a connection to the airbag module, making it impossible to read or clear fault codes via the OBD port.

Occasionally, the system may falsely report faults in peripheral components like seat occupancy mats or sensors—even though these parts are intact. In such instances, the root cause lies within the central control unit itself.

In which vehicles is the 3T0 959 655 A Control Unit installed?

The Airbag Control Unit with part number 3T0 959 655 A is specifically used in the second generation of the Škoda Superb (Type 3T), encompassing both sedan and estate (Combi) variants of pre‑facelift and facelift models produced between 2008 and 2015.

At Airbag24, we repair this control unit for the following specific models:

Škoda Superb 2 [3T] (2008–2013)

Škoda Superb 2 [3T] Facelift (2013–2015)

Škoda Superb Combi [3T] (2008–2015)

How does the repair process work at Airbag24?

Professional repair of the 3T0 959 655 A control unit at Airbag24 involves an in-depth analysis of the internal electronics. Stored crash data is safely erased, and any defective components on the circuit board are replaced. Following repairs, the unit undergoes thorough testing and is fully functional again.

The process begins with the submission of the removed control unit. For targeted analysis, it helps if you include a printout of the fault codes read from the vehicle.

At Airbag24, we first perform a hardware-level readout of the internal memory chips. If crash data is present, it is completely reset—an operation often impossible through standard workshop diagnostics.

Next, we inspect all relevant electronic components and solder joints. After successful restoration and a final functional test, the control unit is ready for reinstallation. You receive a 12-month warranty on the completed repair.

Important: After reinstallation, the vehicle’s fault memory must be cleared using a diagnostic tool so that the system correctly recognizes the repaired unit and the warning light goes out.

Important Safety Notes for the Airbag System

Work on the airbag system must be performed exclusively by trained professionals. Using simulators, resistors, or other bypass devices to disable the warning light is illegal, life‑threatening, and will result in the immediate revocation of the vehicle’s operating permit.

Before suspecting the control unit as the source of the problem, all peripheral components—such as sensors, cables, and connectors—must be carefully inspected. A simple broken cable can produce symptoms identical to those of a faulty control unit.

Any modifications that falsely simulate proper system functionality will, in an emergency, deactivate life‑saving components. The safety of vehicle occupants can no longer be guaranteed.

What Shipping Options Does Airbag24 Offer?

For repairing your control unit at Airbag24, you can either send the package yourself free of charge or arrange a convenient UPS pickup from your preferred location. Returns are also free of charge, with options for standard UPS shipping or, optionally, express delivery and/or cash on delivery, ensuring maximum flexibility.

Shipping to Airbag24: You can choose between free self‑shipping by taking your package to the post office or scheduling a UPS pickup directly at your home or workshop.

Returning to You: After repair, several options are available. Standard UPS shipping is free. For faster delivery, you can select UPS Express shipping; both methods are also available with cash on delivery. Alternatively, personal collection on-site is possible.