Airbag control unit with part number 4896616AA

What is the function of Airbag Control Unit 4896616AA?

The airbag control unit with part number 4896616AA is the central control unit (SRS Control Unit) of the occupant restraint system in the Dodge Caliber PM. It processes signals from crash sensors to precisely deploy airbags and seatbelt pretensioners at the right moment in the event of a collision.

As the brain of the safety system, this module continuously monitors all connected components, including front and side airbags, seatbelt pretensioners, as well as acceleration and pressure sensors. It ensures that the system remains operational at all times and immediately alerts the driver to malfunctions via the SRS warning light.

The primary task of control unit 4896616AA is real-time analysis of sensor data. Using sophisticated algorithms, it identifies the type and severity of an impact and decides within milliseconds which restraint devices need to be activated to provide optimal protection for occupants.

Why does Airbag Control Unit 4896616AA fail?

The most common cause of failure is the storage of crash data after an accident, which permanently locks the unit. Other reasons include hardware defects such as broken wiring, loose connectors, or moisture damage leading to internal electronic faults.

After deploying airbags or seatbelt pretensioners, the control unit writes an irreversible fault record—known as crash data—into its internal memory. This lockout is a manufacturer’s safety measure designed to prevent further use of a potentially damaged device. The system remains blocked until the data is professionally reset.

Electrical and physical influences are also frequent sources of failure. Issues like faulty wiring, corroded connectors due to moisture, or overvoltage in the vehicle’s electrical system can result in internal board defects. Previous improper repair attempts may also lead to secondary damage.

This control unit is also known under alternative part numbers considered replacement or aftermarket options, including 4896616AB, 68148034AA, and 4672602AB. Defects associated with these numbers typically present with identical symptoms.

How do you recognize a defect in Control Unit 4896616AA?

A defect in Control Unit 4896616AA primarily manifests as a constantly illuminated or flashing SRS airbag warning light on the instrument cluster. Additionally, communication with diagnostic equipment often becomes impossible, and the fault memory cannot be cleared, indicating an internal malfunction.

The most noticeable sign for the driver is the active airbag warning light. It indicates a serious fault in the restraint system and means that airbags and seatbelt pretensioners will no longer deploy in the event of a crash. This poses a significant safety risk and requires immediate action.

In the workshop, the defect often shows up as a failed diagnosis. The control unit stops responding to requests from an OBD tester. Read-out error codes such as 65535, 93F9, B1111, or plain text messages like “Control unit defective” directly point to an irreparable internal hardware fault or stored crash data.

In which vehicles is Control Unit 4896616AA installed?

The airbag control unit with part number 4896616AA is specifically designed for the Dodge Caliber of the PM series. It is used in both the original models and the facelifted version. At Airbag24, we repair this control unit covering the entire production run of the model.

At Airbag24, professional repair services for part number 4896616AA are available for the following models:

Dodge Caliber (PM series) manufactured between 2006 and 2009

Dodge Caliber (PM series facelift) manufactured between 2009 and 2011

How is Control Unit 4896616AA professionally repaired?

The repair is performed as a plug-and-play solution. After removal and shipment to Airbag24, technicians conduct a systematic analysis, reset stored crash data, and fix any electronic faults. The unit is then tested, calibrated, and returned with a 12-month warranty.

Before removal, the fault memory should be read out to rule out other potential causes of failure. For removal, the vehicle battery must be disconnected for at least 10 minutes for safety reasons. The control unit is typically located beneath the center console or in the footwell and can be removed after loosening the mounting screws and disconnecting the connectors.

Upon receipt at Airbag24, a precise component-level diagnosis is carried out. Mechatronics engineers erase crash data or resolve the internal fault by replacing defective electronic components on the circuit board. Each unit undergoes a functional test post-repair to ensure flawless communication and operation.

What are the benefits of repairing 4896616AA?

The biggest advantage of repair is substantial cost savings—often exceeding 70% compared to purchasing a new part. The repaired unit is a plug-and-play solution that requires no coding and restores your vehicle’s full safety functionality.

While a new part for the Dodge Caliber often costs over €400, repair offers a significantly more economical alternative. It fully restores the original control unit’s functionality without the high expense of a replacement.

Since the vehicle’s original control unit is refurbished, all factory‑original codes and vehicle data remain intact. This eliminates the need for time‑consuming and costly reprogramming or re‑learning procedures at a specialized workshop. The repaired module can be easily reinstalled and is ready to use immediately.

What shipping options does Airbag24 offer?

Airbag24 provides flexible shipping solutions. You can send your defective control unit back at no charge yourself, or arrange a convenient UPS pickup from your preferred location. For return shipping, you have free standard and faster express options available, including cash-on-delivery.

For sending your item back, you have two convenient choices: either ship the package to us yourself, or book a UPS pickup online. A UPS driver will then collect the package directly from your home, workshop, or another designated address.

Return shipping of the repaired control unit is provided free of charge via standard UPS delivery by default. If you need it sooner, you can opt for UPS Express shipping. Both options are also available with cash-on-delivery, allowing you to settle payment conveniently upon receipt. Alternatively, you can choose to pick up the repaired unit in person at our facility.