Airbag control unit with part number 4896616AB

What is the function of Airbag Control Unit 4896616AB?

The airbag control unit with part number 4896616AB serves as the central control module for the passive safety system (SRS) in certain Dodge Caliber models. It processes data from acceleration sensors in real time and, in the event of a crash, precisely activates the necessary restraint systems such as airbags and seatbelt pretensioners.

As an SRS module, it continuously monitors all connected components of the airbag system, including crash sensors, seat occupancy mats, and seatbelt buckle switches. Its primary task is to assess the severity of a collision and, based on this assessment, make the decision to deploy pyrotechnic charges.

This control unit is known under part number 4896616AB, but it is also technically compatible and interchangeable with variants 4896616AA, 4672602AB, 68148034AA, P56054203AF, P04896621AE, and P04672603AE. Mentioning these numbers is crucial for precise identification in workshop practice.

Why does Airbag Control Unit 4896616AB fail?

The most common cause of failure for control unit 4896616AB is the storage of crash data after a collision, which results in the deliberate locking of the module. In addition, internal electronic defects in hardware components can lead to malfunctions that manifest as specific diagnostic trouble codes.

Following a collision, the unit writes irreversible crash data into its internal memory. This lock is a manufacturer‑imposed safety measure that disables the airbags and causes the SRS warning light to remain steadily illuminated. The system can only be restored to operational status after a professional memory reset.

Internal electronic faults are another frequent cause. Board defects, damaged capacitors, or processor errors may trigger fault codes such as B1111, 65535, 93F9, or 00003. External factors like voltage surges, moisture ingress, or issues in CAN‑bus communication can also damage the control unit’s hardware.

Rarely, insufficient supply voltage or defective components resulting from improper repair attempts may impair the unit’s functionality and lead to complete failure.

How do you recognize a faulty 4896616AB control unit?

The clearest symptom of a defect in control unit 4896616AB is the permanently lit or flashing SRS airbag warning light on the instrument cluster. This indicates a serious malfunction and deactivation of the entire restraint system. Additional signs include communication problems with diagnostic tools or specific error messages.

A persistently illuminated SRS warning light is the primary warning signal. It indicates that airbags and seatbelt pretensioners would not deploy in the event of a crash, posing a significant safety risk. Immediate diagnosis at a specialized workshop is therefore essential.

Another clear indication is when the control unit becomes unresponsive via the OBD interface. The workshop will then be unable to connect to the module to read diagnostic trouble codes, often pointing to a severe internal hardware defect.

Additionally, the fault memory may contain entries such as “control unit defective.” In some cases, a defect can even block vehicle‑specific functions, such as the fuel shut-off valve.

In which vehicles is control unit 4896616AB installed?

The airbag control unit 4896616AB, along with its compatible replacement variants, is specifically designed for the Dodge Caliber. It is used in both first‑generation models (PM) and facelifted versions produced up to 2011.

At Airbag24, we professionally repair control unit 4896616AB for the following models:

Dodge Caliber PM (model years 2006–2009)

Dodge Caliber PM Facelift (model years 2009–2011)

For accurate identification, it is always advisable to compare the part number printed directly on the control unit or to perform a diagnosis using the vehicle identification number (VIN).

How is airbag control unit 4896616AB professionally repaired?

Professional repair is a purely electronic process that restores the control unit to like-new condition. It includes a detailed fault analysis, clearing of crash data (reset), repair or replacement of defective components on the circuit board, and a final functional test to ensure full operational reliability.

After sending the removed control unit to Airbag24, the process begins with a comprehensive diagnosis. Technicians check the unit for stored crash data and analyze the hardware for electronic defects to pinpoint the exact cause of the failure.

In the next step, electronic troubleshooting takes place. Stored crash data is erased at the chip level, and the module is reset. If defective components such as capacitors, processors, or other circuit board parts are identified during analysis, they are professionally repaired or replaced.

Subsequently, each repaired control unit undergoes a rigorous functional test to verify proper communication and activation capability. All repairs come with a 12-month warranty.

What advantages does repair offer compared to a new part?

Repairing the original control unit is the economically and technically superior solution. It delivers substantial cost savings—often exceeding 50%—compared to an expensive new part. Additionally, the vehicle-specific coding remains intact, eliminating the need for time-consuming reprogramming.

A new part can cost several hundred euros depending on the manufacturer, whereas repair provides a significantly more affordable alternative. The high success rate of restoration makes it the preferred choice for workshops and vehicle owners.

The key technical advantage lies in preserving the original coding. Since the vehicle’s own control unit is refurbished, all configurations are already in place. The repaired module can be easily reinstalled via plug-and-play, without requiring costly reprogramming at an authorized dealer.

After reinstalling the repaired control unit, only the vehicle’s general fault memory needs to be cleared at a workshop to fully reactivate the system.

What shipping options does Airbag24 offer?

Airbag24 provides flexible and secure shipping solutions. For outbound shipments, you can send your defective control unit free of charge or arrange a convenient UPS pickup from a location of your choice. For return shipments, free standard and faster express options are available.

For shipping to us, you have two choices: you can ship the package yourself or use UPS’s convenient pickup service, which collects the package directly from your location.

For returning your repaired control unit, we offer the following options:

UPS Standard Shipping (free)

UPS Express Shipping

UPS Standard Shipping with Cash on Delivery

UPS Express Shipping with Cash on Delivery

You also have the option to pick up the device in person at our facility.