
Airbag control unit with part number 4F0 910 655 K
Also written as: 4F0910655K
Control unit repairs for part number 4F0 910 655 K in our shop:
Your vehicle isn't listed?
Part number “4F0 910 655 K” isn't linked to every vehicle in our database – we can usually repair it anyway. Select your vehicle and we'll show you the matching repair:
What does the airbag control unit 4F0 910 655 K do?
The airbag control unit 4F0 910 655 K controls the restraint system (SRS) of Audi. It evaluates the signals from the crash sensors, decides within milliseconds in the event of an accident which airbags and seatbelt pretensioners are triggered, and monitors the system continuously. It reports faults via the airbag warning light; after an accident it stores crash data and locks itself.
In the vehicle, the control unit continuously checks whether sensors, airbags and seatbelt pretensioners are connected and working correctly. If it detects a deviation, it creates a fault entry in its memory and reports the status to the instrument cluster.
In an emergency there is barely any time for the decision. That is why the evaluation of the sensor signals must run reliably in real time, and that is exactly what the unit is designed for.
Why does the control unit 4F0 910 655 K fail?
The most common cause is crash data stored after an accident, even if no airbag has deployed; a normal diagnostic tool cannot erase it. Other possible causes include aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or jump-starting.
Crash data are the measurements the unit records during an accident. They remain in the control unit's memory, and an ordinary diagnostic tool cannot remove them.
The other causes tend to develop gradually. Electronic components age, solder joints can become cold, and at plug connections moisture and corrosion lead to contact problems. Voltage spikes in the vehicle electrical system put additional strain on the electronics.
Airbag24 erases stored crash data as part of the repair. Erasing it beforehand is therefore not necessary.
How can you tell that the 4F0 910 655 K is defective?
The airbag warning light in the instrument cluster lights up permanently or intermittently, and a fault message appears in the instrument cluster. In addition, a diagnostic tool does not establish a connection with the control unit, or the fault memory cannot be cleared.
If the warning light is on, the system indicates a fault that must be checked. A diagnostic tool without a connection to the control unit also indicates a problem.
In an emergency, airbags and seatbelt pretensioners may not deploy with such a defect. Have the system checked before you continue driving.
Which vehicles is the 4F0 910 655 K fitted in?
The airbag control unit 4F0 910 655 K is fitted in these vehicles: Audi A6 C6 4F (2004-2008), C6 4F Facelift (2008-2011), 4FH Allroad (2006-2008) and 4FH Allroad Facelift (2008-2011); Audi S6 C6 (2006-2008) and C6 Facelift (2008-2010).
The following list shows the vehicles in which this control unit was used.
- Audi A6 C6 4F (2004-2008)
- Audi A6 C6 4F Facelift (2008-2011)
- Audi S6 C6 (2006-2008)
- Audi S6 C6 Facelift (2008-2010)
- Audi A6 4FH Allroad (2006-2008)
- Audi A6 4FH Allroad Facelift (2008-2011)
Before removal, first compare the part number on the label of the unit with this page. This only ensures that it is the right unit. Also have the fault memory read out, because only that shows whether the control unit is defective or a plug or cable is the cause.
For the same vehicles, we also repair control units with the part numbers 4F0 910 655 D, 4F0 910 655 L, 4F0 910 655 R, 4F0 959 655 B, 4F0 959 655 E, 4F0 959 655 G.
How does the repair of the 4F0 910 655 K work?
First have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit. Afterwards, create a repair order online and send the unit in well packed. Processing at Airbag24 usually takes 3–4 working days.
The order of these steps serves safety. Airbag24 checks the unit on the test bench, replaces defective components, erases stored crash data and carries out a function test. Airbag24 then sends your own unit back to you.
Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.
How does the control unit 4F0 910 655 K get to Airbag24?
You send the control unit 4F0 910 655 K in as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.
Place the printed repair order in the parcel and pack the unit shock-resistant so that it survives shipping undamaged.
Shipping & repair from Germany
Airbag24 repairs your component in Berlin — usually within 3–4 working days.
Standard shipping within Germany is free; we normally return your part by UPS.
You pay for and insure the inbound shipment to us. On explicit request we ship by express — the extra cost is borne by the customer.
If you withdraw from the contract, you bear the cost of returning the item.
Based on 281 reviews
What our customers say
„Top!!“
„Top“
„Top!“
„Absolutely top, from the order to the shipping. Had a bit of problems because of the connector. Was solved immediately via WhatsApp. Thanks“
Automatically translated · Original: German
„Airbag control unit received today and refitted on an Opel GT to force the passenger airbag. No more fault. Shipping, repair and return fast. Perfect 😃“
Automatically translated · Original: French
„Uncomplicated, fast and easy processing. Was constantly informed about the current status. As stated, repair was not necessary, since error readout and reset was possible. Great service and absolutely trustworthy.“
Automatically translated · Original: German
„I am very satisfied with the service performed by Airbag 24, they did it quickly, solidly and at a very good price. I warmly recommend it.!!!!👌“
Automatically translated · Original: Polish
„Very good service, didn't even take as long as predicted, price/performance excellent. Very detailed installation instructions. Highly recommended.“
Automatically translated · Original: German
„One of the best companies when it comes to service and expertise of Germany.“
Automatically translated · Original: German
„All good, again and again“
Automatically translated · Original: German
„The repair of the AIRBAG control unit was carried out quickly“
Automatically translated · Original: German
„Very fast competent reliable Also cheaper than competitors! Consultation via Mail quick extremely competent and reliable“
Automatically translated · Original: German
„Top!!“



