Airbag control unit with part number 4H0959655

What is the function of the airbag control unit 4H0959655?

The airbag control unit with part number 4H0959655 is the central control module for the occupant protection system in the Audi A8 D4 (4H). It analyzes data from crash sensors and, in the event of an accident, precisely deploys the airbags, seatbelt pretensioners, and pedestrian protection systems to ensure occupant safety.

As the “brain” of the passive safety system, this control unit is responsible for interpreting signals from all relevant acceleration and pressure sensors in the vehicle in real time. Based on this data, it determines within milliseconds whether and which restraint systems need to be activated.

In the Audi A8 of the 4H series, the unit is typically installed in a central, protected location—usually in the center console beneath the handbrake lever. This placement minimizes the risk of damage during a crash and ensures reliable operation.

Why does the control unit 4H0959655 fail?

Defects in the control unit 4H0959655 (including variants 4H0959655C/D) usually arise from software issues such as internal self-test errors that trigger error code 65535, or from permanently stored crash data after an accident. Communication problems with sensors or internal hardware defects are also common causes.

One of the most frequent causes is an internal software or process error. The control unit performs a self-test at every vehicle start-up. If this test fails, the unit locks itself and logs the VAG-specific error code 65535 or B1111, which is generally interpreted as “control unit defective.”

After an accident—or even minor impacts—the device stores so‑called crash data. This data is permanent and cannot be erased using standard workshop diagnostics via the OBD2 interface. For safety reasons, the system remains locked until the data is professionally reset.

Other failure causes include communication issues with connected components such as airbag modules, seatbelt pretensioners, or crash sensors. Low voltage in the vehicle’s electrical system or physical damage to the circuit board or solder joints can also lead to complete failure. Variants 4H0959655C and 4H0959655D are subject to the same fault patterns.

How do you recognize a defect in the 4H0959655?

A defective airbag control unit 4H0959655 primarily manifests as a continuously illuminated airbag warning light on the instrument cluster. Specific error codes such as B100311 (front airbag ignition circuit), B103811 (pedestrian protection), or the general error 65535/B1111 (“control unit defective”) can often be read out.

The most obvious and unmistakable symptom is the persistently lit airbag warning light on the dashboard. It does not turn off after starting the engine, indicating a serious, safety‑relevant system fault.

Using an appropriate diagnostic tool, specific error codes can be retrieved. Typical for the 4H0959655 are the aforementioned internal error 65535, code B100311 for a fault in the passenger front airbag ignition circuit, or B103811, which points to an issue with the pedestrian protection system.

In which vehicles is the control unit 4H0959655 installed?

The airbag control unit with part number 4H0959655 and its variants is specifically designed for the luxury Audi A8 of the D4 series (type 4H). This includes both pre-facelift models and the revised versions produced during a particular manufacturing period.

At Airbag24, we repair the 4H0959655 control unit and its variants for the following specific models:

Audi A8 D4 (type 4H), model years 2010–2013

Audi A8 D4 (type 4H), facelift model years 2013–2017

How is the control unit 4H0959655 professionally repaired?

Professional repair of the 4H0959655 at Airbag24 involves precise diagnostics, erasing permanent crash data using specialized software, and fixing both software and hardware faults. After restoration and a final inspection, the unit is ready for reinstallation, requiring a final coding procedure in the vehicle.

Upon submission to Airbag24, the control unit undergoes a standardized repair process. First comes an initial inspection, where the customer-reported faults are verified. It helps if an error log is prepared before removal and attached to the unit.

The core of the repair consists of several steps depending on the nature of the defect. Stored crash data is erased directly from the control unit’s memory chip using specialized equipment. Internal software errors are resolved through firmware reprogramming. If there is a hardware fault, defective components or solder joints on the circuit board are expertly repaired.

After successful repair, the unit undergoes a final inspection to ensure full functionality. We provide a 12-month warranty on every repair. For reinstallation, please note that the repaired control unit must be re‑adapted (coded) to the vehicle’s specific configuration.

What shipping options does Airbag24 offer?

Airbag24 provides flexible and secure shipping options for your control unit. You can either send the package yourself at no cost or arrange a convenient UPS pickup. For returns, free standard UPS shipping as well as faster express options are available, each with the option of cash on delivery.

For sending your defective unit back, you can choose between free self‑shipping or a convenient UPS pickup from a location of your choice.

Following repair, your control unit will be securely packaged and shipped back to you via our reliable carriers. You have the following options to choose from:

Free standard UPS shipping with a typical delivery time of 1–3 business days.

Faster UPS express shipping for delivery within 1–2 business days.

UPS standard shipping with cash on delivery, if you prefer to pay upon receipt.

UPS express shipping with cash on delivery for exceptionally fast delivery and payment upon receipt.

Alternatively, you can also pick up the repaired control unit in person at our premises.