
Airbag control unit with part number 4L14-14B321-DA
Also written as: 4L1414B321DA
Control unit repairs for part number 4L14-14B321-DA in our shop:

Your vehicle isn't listed?
Part number “4L14-14B321-DA” isn't linked to every vehicle in our database – we can usually repair it anyway. Select your vehicle and we'll show you the matching repair:
What does the airbag control unit 4L14-14B321-DA do?
The airbag control unit 4L14-14B321-DA forms the switching centre of the restraint system (SRS) for Ford. From the signals of the crash sensors, it determines in an accident which airbags and seatbelt pretensioners should trigger.
The evaluation takes milliseconds. Outside of accidents, the unit monitors the system continuously and shows faults via the airbag warning light.
After an accident, the control unit stores crash data and locks itself as a result. The lock only ends with a repair.
Why does the control unit 4L14-14B321-DA fail?
The most common cause is crash data stored after an accident, even if no airbag was triggered. Other possible causes are ageing electronic components, cold solder joints, moisture and corrosion on the plugs, and voltage spikes.
Crash data remains stored, and a normal diagnostic tool cannot erase it. Airbag24 removes it as part of the repair.
Ageing components and cold solder joints are among the typical causes of failure, even without an accident. The changes develop gradually.
Moisture and corrosion on plug connectors disrupt the contact, and voltage spikes from a weak battery or a jump start strain the electronics.
How can you tell that the 4L14-14B321-DA is defective?
The airbag warning light in the instrument cluster stays on permanently or intermittently. Added to this are an error message, a diagnostic tool that cannot reach the control unit, and a fault memory that cannot be cleared.
The airbag warning light is the most important sign. Whether it burns constantly or lights up only intermittently, it indicates a fault in the system.
The instrument cluster may also show an error message. If the diagnostic tool cannot address the control unit, this also points to a problem.
In an emergency, airbags and seatbelt pretensioners may not trigger for as long as the defect persists.
Which vehicles is the 4L14-14B321-DA fitted in?
The 4L14-14B321-DA is fitted in these vehicles: Ford Expedition 2 U222 (2003-2006).
You will find the vehicles in which this control unit is installed in the following list.
- Ford Expedition 2 U222 (2003-2006)
Compare the part number on the label of the removed unit with this page. This confirms that you have the right unit.
Have the fault memory read out before removal. The result shows whether the control unit is defective or whether a plug or a cable is the cause.
For the same vehicles, we also repair control units with the part numbers 3L14-14B321-CB, 5L14-14B321-CC, 5L14-14B321-DA, 6L14-14B321-AB.
How does the repair of the 4L14-14B321-DA work?
You have the fault memory read out, enclose the log and then disconnect the battery. Only then do you remove the control unit and create a repair order online. At Airbag24, the team checks, repairs and tests the unit, and the crash data is erased.
The sequence is binding, because your safety depends on it. The control unit may only be removed once the battery has been disconnected.
At Airbag24, the unit goes onto the test bench. Defective components are repaired, followed by a function test. Your own unit then goes back to you.
Processing at Airbag24 usually takes 3–4 working days. This period refers exclusively to the work in-house.
Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.
How does the control unit 4L14-14B321-DA get to Airbag24?
You send the control unit 4L14-14B321-DA in as a parcel or book a UPS collection. After the repair, Airbag24 sends it back to you by UPS.
Put the printed repair order into the parcel. Pack the control unit shock-proof.
Shipping & repair from Germany
Airbag24 repairs your component in Berlin — usually within 3–4 working days.
Standard shipping within Germany is free; we normally return your part by UPS.
You pay for and insure the inbound shipment to us. On explicit request we ship by express — the extra cost is borne by the customer.
If you withdraw from the contract, you bear the cost of returning the item.
Based on 280 reviews
What our customers say
„Top!!“
„Top“
„Top!“
„Airbag control unit received today and refitted on an Opel GT to force the passenger airbag. No more fault. Shipping, repair and return fast. Perfect 😃“
Automatically translated · Original: French
„Uncomplicated, fast and easy processing. Was constantly informed about the current status. As stated, repair was not necessary, since error readout and reset was possible. Great service and absolutely trustworthy.“
Automatically translated · Original: German
„I am very satisfied with the service performed by Airbag 24, they did it quickly, solidly and at a very good price. I warmly recommend it.!!!!👌“
Automatically translated · Original: Polish
„Very good service, didn't even take as long as predicted, price/performance excellent. Very detailed installation instructions. Highly recommended.“
Automatically translated · Original: German
„One of the best companies when it comes to service and expertise of Germany.“
Automatically translated · Original: German
„All good, again and again“
Automatically translated · Original: German
„The repair of the AIRBAG control unit was carried out quickly“
Automatically translated · Original: German
„Very fast competent reliable Also cheaper than competitors! Consultation via Mail quick extremely competent and reliable“
Automatically translated · Original: German
„I registered my airbag control unit online, got a repair order, sent in the device and after 2 days got a response, device ready. Top.. I would have just wished for a note about the defect of the device. For example cold…“
Automatically translated · Original: German
„Top!!“



