Airbag control unit with part number 550519300

What is the function of Airbag Control Unit 550519300?

The Airbag Control Unit 550519300 is the central control module for the passive safety system in Citroën Xantia models. It processes data from acceleration sensors to precisely deploy airbags and seatbelt pretensioners in the event of a crash, thereby protecting occupants from serious injuries.

As the heart of the restraint system (SRS), this control unit is responsible for analyzing all relevant sensor data in real time. It determines within milliseconds whether a collision has occurred and which safety components need to be activated.

Inside the device, sensitive electronics—including microprocessors and memory chips (EEPROM/Flash)—process both vehicle configuration settings and event data. This complexity makes it susceptible to specific electronic faults.

Why does Control Unit 550519300 fail?

The most common causes of failure for Control Unit 550519300 are internal electronic malfunctions, blockage due to stored crash data after an accident, and communication failures. These defects prevent the entire airbag system from functioning properly and require professional electronic repair.

A typical fault is the so‑called “internal error,” often indicated by diagnostic error code 65535. This suggests a problem with internal hardware components such as the processor or memory chip.

After a collision—even minor impacts—the unit stores crash data and locks itself permanently. Workshops often recommend costly replacement in these cases, although targeted repair by clearing this data is possible.

Communication issues with the diagnostic tool or other vehicle components via the CAN bus are also widespread. Causes may include aging, moisture damage to the circuit board, or damage caused by overvoltage—for example, during jump-starting. In some instances, a defect is mistakenly diagnosed when the root cause is actually low battery voltage.

How do you recognize a fault in 550519300?

A fault in Airbag Control Unit 550519300 primarily manifests as a continuously illuminated airbag warning light (SRS light) on the instrument cluster. Additional signs include specific error messages such as “internal error” in the diagnostic system or complete loss of communication with the control unit.

The clearest indication is the active SRS warning light that fails to turn off after starting the engine. This signals that the entire restraint system is disabled and no airbags will deploy in the event of a crash.

During a workshop diagnosis, error codes like “control unit defective” or the specific code 65535 can be read out, directly pointing to an internal malfunction of the control unit.

In some cases, the control unit becomes unreachable to diagnostic tools, failing to respond to requests. This complicates precise fault analysis and often indicates a problem with power supply or the internal processor unit.

In which vehicles is Control Unit 550519300 installed?

The part number 550519300 is specifically designed for vehicles manufactured by Citroën. It is mainly used in the Xantia I and Xantia II model series. At Airbag24, we professionally repair this control unit for the aforementioned models to restore full safety.

At Airbag24, we repair the Airbag Control Unit with part number 550519300 for the following specific vehicle models:

Citroën: Xantia I (1993–1997), Xantia II (1998–2001)

How does the repair of 550519300 proceed at Airbag24?

The repair of Control Unit 550519300 at Airbag24 involves a detailed electronic analysis, elimination of the root cause—such as clearing crash data or replacing faulty components—and a final functional test on a simulator. This restores the original functionality without the need for expensive replacement.

Following proper removal, which strictly adheres to safety protocols like disconnecting the battery, please send the unit to Airbag24. Our technicians first perform an incoming inspection to verify the reported fault.

Depending on the nature of the defect, repairs are carried out accordingly. Stored crash data is erased from the memory chips (EEPROM/Flash), returning the unit to its factory settings. For hardware-related issues, damaged components such as capacitors, processors, or cold solder joints are expertly repaired.

Upon successful completion of the repair, the control unit undergoes testing on a specialized test bench that simulates vehicle sensor signals. This ensures flawless operation before the unit is returned to you. We provide a 12-month warranty on every repair.

What shipping options are available at Airbag24?

For repairing your control unit, Airbag24 offers flexible and secure shipping options. You can send the unit back yourself free of charge or arrange a convenient UPS pickup. For the return shipment, you have access to free standard and fast express options, including cash-on-delivery.

For sending your removed control unit to us, you have two choices: you can ship it yourself or use our convenient UPS pickup service from a location of your choice.

The return shipment of the repaired unit is provided free of charge by default via UPS standard shipping. If you need it faster, you can opt for UPS express shipping.

Both standard and express shipping options are also available with the cash-on-delivery payment method. Alternatively, you can pick up your repaired control unit in person at our facility.