Airbag control unit with part number 5Q0 959 655 D

What is the function of Airbag Control Unit 5Q0 959 655 D?

The airbag control unit with part number 5Q0 959 655 D is the central control module for the occupant protection system in the Volkswagen Golf 7 (Type AU/5G). It continuously analyzes data from crash sensors and, within milliseconds, decides whether to activate airbags and seatbelt pretensioners to ensure maximum safety.

As an integral component of the vehicle’s electronics, it communicates with other systems and stores all relevant event data. The unit is also known under cross-references 5WK44720, 5WK44884, 5WK44885, 5WK44886, and A2C19714001, which indicate technically related or identical variants.

Its primary task is to precisely trigger pyrotechnic restraint devices while preventing unintended activations. After a crash, the control unit often locks itself by storing crash data, necessitating repair or replacement.

What defects occur in 5Q0 959 655 D?

The most common defects of control unit 5Q0 959 655 D are electronic in nature. These primarily include crash data that is internally stored and cannot be erased after an accident, complete communication failure via the OBD2 interface, as well as internal hardware malfunctions that trigger error code B2000 (control unit defective).

A typical reason for repair is the storage of crash data. Following a collision, the unit locks itself for safety reasons and cannot be reset using standard diagnostic tools. In some cases, the stored vehicle identification number is also lost.

Another frequent cause of failure is total loss of communication. The control unit becomes unreachable through the diagnostic interface or is reported as “dead,” indicating a severe internal electronic fault.

Software errors, sporadic malfunctions, or coding issues may also arise. Often, the generic error code B2000 is logged, pointing to an unspecified defect within the control unit and requiring professional diagnosis.

It is important to verify whether the root cause lies externally. Damaged cables—such as those caused by a marten bite—or contact problems can also lead to malfunctions and should be ruled out by the workshop before removing the control unit.

How do you recognize a defect in control unit 5Q0 959 655 D?

A defect in the airbag control unit 5Q0 959 655 D is unmistakably indicated by a permanently illuminated airbag warning light (SRS lamp) on the instrument cluster. Additional reliable signs include the absence of communication with the diagnostic tool and persistently stored error codes such as B2000.

The primary symptom is the active airbag warning light, which does not extinguish even after restarting the engine. This signals a critical fault in the restraint system and inevitably results in failing the main inspection (TÜV).

Another clear indication occurs when the workshop’s diagnostic equipment cannot establish a connection to the airbag control unit. The unit fails to respond to queries, making precise fault analysis impossible and suggesting an internal defect.

In some cases, accompanying symptoms such as an error message related to the electric parking brake may also appear. Such symptoms often point to issues in the wiring or connectors running in the same area as the airbag control unit.

In which vehicles is 5Q0 959 655 D installed?

The airbag control unit with part number 5Q0 959 655 D is specifically used in Volkswagen vehicles. It is primarily designed for the seventh generation of the VW Golf. Airbag24 offers professional and reliable repair services for this control unit.

At Airbag24, we repair part number 5Q0 959 655 D, which is installed in the following model:

Volkswagen Golf 7 (Type AU, manufactured between 2012–2020)

How is control unit 5Q0 959 655 D professionally repaired?

Professional repair at Airbag24 begins with an initial inspection of the unopened unit. Stored crash data is then removed using specialized software, the device’s firmware is reprogrammed, and any defective electronic components are replaced as needed. All repairs come with a 12-month warranty.

For targeted diagnostics, it is advisable to read out the fault memory before dismantling the control unit and include a printed copy of the diagnostic report with your package. Under no circumstances should the unit be opened or tampered with during the repair process.

After sending the unit to Airbag24, our technicians conduct a comprehensive analysis. Using specialized equipment, crash data is erased even if OBD2 access is blocked. Defective components on the circuit board are replaced with original parts to restore full functionality.

After successful repair and final testing, the control unit is returned. Following reinstallation in the vehicle, the fault memory must be cleared. In some cases, re-coding the control unit to the vehicle may be required.

What are the benefits of a repair?

The key advantage of repairing control unit 5Q0 959 655 D is substantial cost savings—up to 90% compared to purchasing a new part. Additionally, the original vehicle coding is preserved, simplifying reinstallation and avoiding extra programming costs.

A new part often costs between 500 and 650 euros from the manufacturer, plus installation and programming fees at a specialized workshop. Repairing the unit is therefore a far more economical alternative, without compromising safety or quality.

Since the vehicle’s original control unit is refurbished, all vehicle-specific data—such as the VIN and coding—remains intact. After installation, the unit is typically ready for immediate use (plug-and-play), saving time and effort.

Moreover, repair is a sustainable solution that helps avoid electronic waste. With a 12-month warranty on the work performed, repair offers a safe and reliable option.

What shipping options does Airbag24 offer?

Airbag24 provides flexible and secure shipping options. You can send your defective control unit free of charge yourself, bring it in person, or arrange convenient UPS pickup. For returns, we offer free standard shipping as well as express and cash-on-delivery options.

For sending the item to us, you have several choices: ship the package yourself, drop it off directly at our workshop, or use our UPS pickup service from a location of your choice.

For returning the repaired control unit, you can choose from the following options:

Free UPS standard shipping, UPS express shipping, UPS standard shipping with cash-on-delivery, UPS express shipping with cash-on-delivery, or personal self-collection at our workshop.