Airbag control unit with part number 607630800E

What does the airbag control unit 607630800E do?

In a vehicle from Iveco, the airbag control unit 607630800E controls the entire restraint system. It checks the crash sensors and, in an accident, decides within milliseconds which airbags and seatbelt pretensioners are triggered.

It also monitors the system continuously. If it detects a fault, it shows this via the airbag warning light in the instrument cluster.

After an accident the unit stores crash data and locks itself.

Why does the control unit 607630800E fail?

Most often the cause is crash data stored after an accident, even if no airbag was triggered. Aged electronic components, cold solder joints, moisture and corrosion in plug connections, or voltage spikes, for example from weak batteries or jump starts, are also possible.

A standard diagnostic tool cannot erase the crash data. Airbag24 erases it during the repair.

Whether one of the other causes is present can only be determined by a careful check.

How can you tell that the 607630800E is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently if the 607630800E has a defect. Fault messages in the display, a diagnostic tool without connection and a fault memory that cannot be cleared may also occur.

The light shows the state of the system, and that state needs to be clarified. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

It is therefore worth not waiting and having the warning checked promptly.

Which vehicles is the 607630800E fitted in?

The 607630800E occurs in these vehicles: Iveco Daily IV (2006-2011).

The vehicles concerned are listed in detail below:

• Iveco Daily IV (2006-2011)

If the part number on the label of the removed unit matches this page, you have the right unit. That is all it tells you. Therefore have the fault memory read out before you send the unit in; it determines whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 5801330269, 5801527499, 607630800D, 607630800G, 69503167.

How does the repair of the 607630800E work?

First have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit 607630800E. Airbag24 then checks it on the test bench and repairs defective components.

The order is mandatory for safety reasons. Only once the unit is removed do you create a repair order online and pack the control unit well before you send it.

Airbag24 erases the stored crash data. A function test follows, and then your own unit is returned to you. Processing usually takes 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 607630800E get to Airbag24?

You send the control unit 607630800E as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order into the parcel and pack the unit shock-proof.