Airbag-Steuergerät mit der Teilenummer 610792301

What is the function of Airbag Control Unit 610792301?

The airbag control unit with part number 610792301 is the central control module for the passive safety system, specifically designed for the Peugeot 308 SW II. It processes data from crash sensors in real time and determines whether to deploy airbags and other restraint systems, ensuring occupant protection in the event of a collision.

As an original component in the Peugeot 308 SW II (model years 2013–2021), this ECU serves as the brain of the entire airbag system. It receives signals from acceleration sensors distributed throughout the vehicle. Upon impact, the electronics analyze the force and direction of the collision and selectively activate necessary components, such as the knee airbag or the passenger-side airbag.

The proper functioning of this module is critical for safety. It ensures that restraint systems are deployed only when required by the accident scenario, preventing unintended activations during normal driving conditions.

Why does Control Unit 610792301 fail?

The most common cause of failure for Control Unit 610792301 is stored crash data following an airbag deployment. Other defects arise from internal electronic malfunctions, short circuits on the circuit board, or physical damage such as water ingress. These issues are almost exclusively hardware-related and disable the device’s functionality.

After an accident in which airbags or seatbelt pretensioners have been activated, the control unit stores what is known as a “crash lock.” For safety reasons, this data prevents further use and necessitates professional repair to restore full system functionality.

Electronic faults can also occur without any accident. These include cold solder joints, defective processors or memory chips, and damage caused by short circuits in the vehicle’s electrical system. Water damage often leads to irreparable corrosion on the circuit board if not addressed promptly.

Similar fault patterns are observed in identical control units with reference numbers 9807568180, 9665100080, and 608762100B, which are also installed in Peugeot 308 series models.

How do you recognize a defect in 610792301?

A clear symptom of a malfunctioning Control Unit 610792301 is the continuously illuminated airbag warning light on the instrument panel. Often accompanied by the inability of diagnostic tools to communicate with the control unit, error codes such as 1712, 1728, or “internal error” recorded in the fault memory confirm the suspicion.

The most noticeable sign is the airbag warning light, which fails to extinguish after engine start-up or remains steadily lit even after a brief self-test phase of about 30 seconds. This indicates a critical system failure.

Another serious symptom is complete loss of communication: the workshop cannot establish a connection between the diagnostic tool and the airbag control unit, making further troubleshooting on the vehicle impossible.

Stored fault codes also provide clear evidence. Codes like 1712, 1728, 1730, or general messages such as “control unit defective” or “crash data stored” directly point to a defect within the module itself.

In which vehicles is Control Unit 610792301 installed?

The airbag control unit with part number 610792301 is specifically designed for the second-generation Peugeot 308 SW. At Airbag24, we professionally repair this module for the entire model range from 2013 to 2021, including facelifted versions, restoring both safety and functionality.

At Airbag24, we service part number 610792301 for the following specific models:

Peugeot 308 SW II (model years 2013–2017)

Peugeot 308 SW II Facelift (model years 2017–2021)

It is important to note that control units with alternative part numbers—such as 9807568180 or 9665100080—may also be installed in these vehicles; they are functionally identical and may exhibit the same defects.

How does the repair of 610792301 proceed at Airbag24?

At Airbag24, every control unit undergoes a standardized repair process. After submission, a precise diagnosis verifies the nature of the fault. Depending on the issue, crash data is cleared, defective components replaced, and solder joints reworked. A final test ensures full functionality, backed by a 12-month warranty.

The process begins with the return of the removed control unit. A detailed description of the problem provided by the customer or workshop—ideally accompanied by a test report—helps technicians quickly identify the root cause.

The next step involves technical analysis, where engineers determine whether crash data is stored or if there is an electronic fault on the circuit board. Based on this diagnosis, repairs are carried out, which may include resetting the crash lock or replacing specific microcontrollers or memory chips.

After successful repair, the control unit is tested on specialized test benches to ensure it communicates flawlessly and performs all functions as if it were new. We provide a 12-month warranty on every repaired unit.

What are the benefits of repair?

Repairing control unit 610792301 is an economically and technically superior alternative to purchasing a new one. You often save 700 to 800 euros compared to an expensive new part, retain your vehicle’s original configuration, and enjoy fast processing along with a 12-month warranty.

The biggest advantage is the significant cost savings. According to market research, a new control unit of this type can be up to 800 euros more expensive than a professional repair from Airbag24.

An additional key benefit is preserving your vehicle’s original data. Since your own control unit is repaired, in most cases there’s no need for time-consuming re-coding or reprogramming at the workshop. The unit is ready to use immediately after installation (plug-and-play).

Moreover, repair is a sustainable solution. It helps avoid electronic waste and conserves valuable resources that would otherwise be required to manufacture a new part. With a 12-month warranty, you take no risks.

What shipping options does Airbag24 offer?

Airbag24 provides flexible, customer-friendly shipping options. You can either send your defective control unit back free of charge yourself or arrange convenient UPS pickup at a location of your choice. For return shipping, you have the option of free standard UPS delivery or faster UPS Express delivery—both available with cash-on-delivery as well.

For outbound shipping, you have two convenient choices: you can ship the package to us yourself or use UPS’s pickup service, which collects your package directly from your home or workshop.

Once the repair is complete, the control unit is securely packaged and returned to you. You can choose from the following options:

Free standard UPS delivery is our default option. Alternatively, we offer faster UPS Express delivery for particularly speedy arrival.

Both standard and express shipping are also available with cash-on-delivery. Additionally, you can pick up the repaired control unit in person at our premises.