Airbag control unit with part number 68105432AG

What does the airbag control unit 68105432AG do?

The airbag control unit 68105432AG coordinates the SRS restraint system for Chrysler and Dodge. Via the crash sensors it measures what happens in an accident, and it decides within milliseconds which airbags and seatbelt pretensioners are triggered. It monitors the system without interruption.

Faults are reported by the airbag warning light, which sits in the instrument cluster.

An accident puts crash data into the memory, and the unit locks itself.

Why does the control unit 68105432AG fail?

For failures of the 68105432AG, crash data from an accident is the most common cause, even when no airbag has been triggered. Other causes are ageing, contact problems and voltage spikes.

These entries cannot be removed with an ordinary diagnostic tool. The repair at Airbag24 includes deleting them.

Further causes at a glance:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or jump-starting

How can you tell that the 68105432AG is defective?

A defect in the 68105432AG is indicated when the airbag warning light in the instrument cluster stays on permanently or intermittently.

The airbag warning light is the most important sign. In addition there is an error message in the instrument cluster, a diagnostic tool that cannot make a connection, and a fault memory that cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may therefore fail to trigger. Do not wait; have the condition checked.

Which vehicles is the 68105432AG fitted in?

This 68105432AG is found in these vehicles: Chrysler Town & Country 5th generation (1990-2016); Dodge Grand Caravan 5th generation (2008-2020); Chrysler Voyager 5th generation (2008-2016).

The list summarises the assignment:

• Chrysler Town & Country 5th generation (1990-2016)
• Dodge Grand Caravan 5th generation (2008-2020)
• Chrysler Voyager 5th generation (2008-2016)

Check the part number on the label of the removed unit against this page. This only shows that it is the right unit. Also have the fault memory read out beforehand; only this log shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 05094018AL, 05094018AM, 5094019AK, 5WK43858, 68062118AE, 68062118AF.

How does the repair of the 68105432AG work?

First you read out the fault memory and attach the log. Then you disconnect the battery, only then remove the control unit, and create a repair order online. At Airbag24 processing usually takes 3–4 working days.

Airbag24 checks the unit on the test bench. Defective components are repaired, the crash data deleted, and then a function test follows.

Afterwards your unit is returned to you. Keep to the stated sequence during removal, as it serves your safety. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 68105432AG get to Airbag24?

For transport you send the 68105432AG as a parcel, or arrange a UPS collection for an extra charge. Airbag24 sends the repaired unit back by UPS.

Put the printed repair order into the parcel, and pad the unit so it is shock-resistant.