Airbag control unit with part number 6857316

What is Airbag Control Unit 6857316?

The airbag control unit with part number 6857316 is the central safety module (SRS module) for the BMW M5 of the F10 series. Its primary function is to monitor crash sensors and precisely, within seconds, deploy airbags and seatbelt pretensioners in the event of a collision, thereby protecting occupants.

As the brain of the passive safety system, this control unit continuously processes data from acceleration and pressure sensors throughout the vehicle. It detects the type and severity of an impact and determines which restraint systems need to be activated.

The proper functioning of this module is critical for vehicle safety. A failure or defect typically results in complete deactivation of the airbag system, indicated by a warning light on the dashboard.

The control unit 6857316 was specifically developed for the BMW M5 F10 (model years 2011–2017) and is tailored to its unique safety architecture.

What Defects Occur in 6857316?

The most common reason for repairing control unit 6857316 is the storage of crash data after an accident, which locks the module. Other typical defects include internal hardware failures leading to total communication loss, as well as power supply issues caused by faulty components.

Following a crash, the control unit stores an irreversible error record ("crash data stored"). This is a manufacturer‑imposed safety measure that locks the device, requiring replacement or professional repair.

A widespread defect is an internal hardware failure, often signaled by error code 0000F0: MRS internal control unit error. In such cases, electronic components on the circuit board—such as processors or memory chips—are directly affected and must be replaced.

Problems with the internal power supply can also occur, manifesting as error code 000011: Supply voltage too low. While a weak vehicle battery may be the cause, this error often points to a defect within the control unit itself.

Total communication failure, where the control unit becomes unreachable via the diagnostic interface, is another clear indication of a severe hardware fault. Similar control units in models like the BMW 5 Series (F10/F11) or 6 Series (F06/F12/F13) frequently exhibit comparable fault patterns.

How Do You Recognize a Defect in Control Unit 6857316?

The most obvious symptom of a defect in control unit 6857316 is the permanently illuminated or flashing airbag warning light (SRS lamp) on the instrument cluster. Additionally, the control unit may become inaccessible to diagnostic tools, making fault analysis at a workshop impossible.

The illuminated SRS warning light is a critical signal that must not be ignored. It indicates that the entire airbag system has been deactivated and will no longer provide protection in the event of a crash.

Another typical sign occurs when a workshop attempts to read the fault memory but cannot establish a connection to the airbag control unit. The module fails to respond to diagnostic requests, suggesting an internal malfunction.

If communication remains possible, specific error codes are often retrieved. Entries such as "Internal Control Unit Error" or indications of stored crash data confirm the defect and the need for repair.

In Which Vehicles Is Airbag Control Unit 6857316 Installed?

The airbag control unit with part number 6857316 is specifically designed for the BMW M5 of the F10 series (2011–2017). Similar control units with comparable functions and fault patterns are also used in other models of the BMW 5 Series and 6 Series from the F‑series lineup.

At Airbag24, we professionally repair control unit 6857316 for the following main model:

BMW: M5 F10 (model years 2011–2017)

Furthermore, control units with similar technical foundations and comparable symptoms may also be installed in other models of this vehicle generation, including the BMW 5 Series (F10 Sedan, F11 Touring) and the BMW 6 Series (F06 Gran Coupé, F12 Convertible, F13 Coupe).

How Does Repair of Control Unit 6857316 Proceed?

Repair at Airbag24 begins with a detailed analysis on a specialized test bench to identify the exact cause of the fault. Defective electronic components are then professionally replaced, and any stored crash data is erased. Following a final functional test, the control unit is fully operational again.

The process starts with your repair order. After careful removal, please send the defective control unit securely packaged.

Upon receipt at Airbag24, our technicians perform a comprehensive diagnosis to determine whether the issue stems from a communication error, an internal component failure, or stored crash data.

The actual repair is carried out at the component level. Defective microchips, capacitors, or other parts on the circuit board are precisely replaced. If crash data has been stored, the control unit’s memory is professionally reset.

Following restoration, the control unit undergoes a final test to ensure flawless functionality across all systems. The repair is often a plug-and-play solution that requires no subsequent vehicle coding. Each repair comes with a 12-month warranty.

What shipping options are available?

For a hassle-free process, you can either send your defective control unit to Airbag24 yourself or arrange a convenient UPS pickup at your preferred location. For return shipping, you have access to free standard UPS delivery as well as faster express options, including cash-on-delivery.

For outbound shipping, you have two choices: you can ship the package to us yourself or schedule a UPS pickup. Personal drop-off at our facility is also possible by prior arrangement.

After successful repair, return shipping is handled according to your preferences. We offer the following options:

Free standard UPS shipping (typically delivered within 1–3 business days).

UPS express shipping (typically delivered within 1–2 business days).

Both standard and express shipping are available with cash-on-delivery. Alternatively, you may choose to pick up your repaired control unit in person at our premises.