Airbag control unit with part number 6E5T15607CA

What is the function of the airbag control unit 6E5T15607CA?

The part number 6E5T15607CA refers to a central airbag or SRS control unit used in Ford Kuga II models from model years 2012 to 2019. Its primary task is to monitor the entire passive safety system and trigger the airbags and seatbelt pretensioners instantaneously in the event of a crash.

As the “brain” of the restraint system, this module continuously processes data from various crash sensors distributed throughout the vehicle. It analyzes acceleration and deceleration values to assess the severity of an impact and determine which restraint devices need to be activated.

In addition, the control unit features an internal memory known as the Event Data Recorder (EDR) or SRS crash log. In the event of a crash, relevant information about the incident is stored here, causing the control unit to enter a locked state after activation.

Why does the 6E5T15607CA control unit fail?

The most common cause of malfunction for the 6E5T15607CA is the storage of crash data following an accident, which intentionally locks the module. Other typical failure reasons include electronic defects on the circuit board, such as faulty components, cold solder joints, or issues with the EEPROM memory.

After an airbag deployment, the control unit becomes locked to prevent reuse without professional inspection. This condition is not a defect in the traditional sense but rather a safety-related lockout. A professional repair can read out the crash data and reset the module (“reset”), restoring full functionality.

Electronic faults detected in the lab often manifest as blown SMD components like voltage regulators, capacitors, or MOSFETs. Broken traces, corroded contacts, or short circuits on the board can also disrupt operation and require component-level repairs.

Many configuration and operational settings are stored in EEPROM or flash memory. Defects in these memory chips or in the firmware can lead to internal errors. Repair in such cases involves reading the data, backing it up, and, if necessary, repairing or reprogramming the memory.

How do you recognize a fault in the 6E5T15607CA?

A defective 6E5T15607CA airbag control unit typically shows itself through a permanently illuminated airbag warning light on the instrument cluster. Another clear indication is that the control unit becomes unresponsive during diagnostics or reports specific error codes pointing to an internal fault.

The most noticeable symptom is the airbag warning light, which fails to extinguish after starting the vehicle, signaling that the entire restraint system is inoperative and would not deploy in a crash.

Often, a workshop’s diagnostic tool cannot establish communication with the airbag control unit. Requests via the OBD interface go unanswered, making precise fault analysis within the vehicle impossible.

If communication remains possible, error codes are frequently retrieved, indicating an internal, non-erasable fault in the control unit or stored crash data. These messages confirm a defect within the module itself.

In which vehicles is the 6E5T15607CA control unit installed?

The airbag control unit with part number 6E5T15607CA is specifically used in Ford vehicles. It is assigned exclusively to Ford Kuga models, covering both the second generation and its facelift, spanning production years from 2012 to 2019.

At Airbag24, we repair the 6E5T15607CA for the following models:

Ford Kuga 2 ’13 (model years 2012–2016)

Ford Kuga 2 ’13 Facelift (model years 2016–2019)

How is the 6E5T15607CA professionally repaired?

Repair of the 6E5T15607CA at Airbag24 follows a standardized process. After removal and shipment of the module, a detailed electronic analysis is performed in the lab. Depending on the root cause of the fault, crash data is reset or defective components on the circuit board are replaced. Final functional tests ensure the quality of the repair.

Before dismantling, a diagnosis should be carried out on the vehicle to rule out external sources of failure, such as faulty sensors or broken cables. Following removal, the control unit is securely packaged and sent to Airbag24.

In the lab, our technicians open the housing and conduct visual inspections along with electrical measurements. They check current draw and simulate onboard power supply to precisely locate the fault.

Restoration is achieved by professionally erasing crash data using specialized software or replacing defective hardware components, such as voltage regulators, capacitors, or memory chips. After repair, a functional test is conducted, and a test report is prepared.

After installing the repaired control unit, a final vehicle test is required. Depending on the vehicle configuration, re-coding or adaptation (e.g., VIN entry) may be necessary. We provide a 12-month warranty on every repair.

What shipping options are available at Airbag24?

For a hassle-free process, you can either send your defective control unit to Airbag24 yourself at no cost, or arrange a convenient UPS pickup. For returning the repaired unit, you have access to free standard UPS shipping, faster express options, and in‑store pickup.

For the outbound shipment, you can choose: send the package yourself or take advantage of our free UPS pickup service from a location of your choice.

When returning the repaired unit, we offer several options. Standard UPS shipping is free for you. If you need it faster, you can select UPS Express shipping; both options also support cash-on-delivery. Alternatively, you can pick up the repaired unit directly from our premises.