
Airbag control unit with part number 6N0 909 603 AQ
Also written as: 6N0909603AQ
Control unit repairs for part number 6N0 909 603 AQ in our shop:
Your vehicle isn't listed?
Part number “6N0 909 603 AQ” isn't linked to every vehicle in our database – we can usually repair it anyway. Select your vehicle and we'll show you the matching repair:
What does the airbag control unit 6N0 909 603 AQ do?
The airbag control unit 6N0 909 603 AQ is the central control unit of the restraint system (SRS) for Volkswagen. It evaluates the signals from the crash sensors, decides within fractions of a second in an accident which airbags and seatbelt pretensioners are triggered, and monitors the system continuously. It reports faults via the airbag warning light; after an accident it stores crash data and locks itself.
The control unit connects the sensors with the airbags and seatbelt pretensioners it triggers in an emergency. Monitoring therefore does not only start in an accident, but runs permanently.
Why does the control unit 6N0 909 603 AQ fail?
The most common cause is crash data stored after an accident, even if no airbag was triggered. A standard diagnostic tool cannot erase this data. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes, for example from a weak battery or jump-starting.
During repair, Airbag24 erases the stored crash data.
Aged components and cold solder joints can cause faults. Moisture and corrosion at plug connectors impair the connection, and voltage spikes stress the electronics.
How can you tell that the 6N0 909 603 AQ is defective?
The airbag warning light in the instrument cluster indicates a defect if it lights up permanently or intermittently. A fault message also appears in the instrument cluster, and the diagnostic tool finds no connection to the control unit.
In an emergency, the airbags and seatbelt pretensioners may then not trigger. A fault memory that cannot be cleared is a further sign.
Therefore have the warning checked promptly before continuing to use the vehicle.
Which vehicles is the 6N0 909 603 AQ fitted in?
The control unit 6N0 909 603 AQ is intended for Volkswagen. It is fitted in these vehicles: Volkswagen Transporter T4 (1990-2003); Volkswagen Multivan T4 (1990-2003); Volkswagen Caravelle T4 (1990-2003); Volkswagen California T4 (1990-2003).
The vehicles in detail:
- Volkswagen Transporter T4 (1990-2003)
- Volkswagen Multivan T4 (1990-2003)
- Volkswagen Caravelle T4 (1990-2003)
- Volkswagen California T4 (1990-2003)
Compare the part number on the label of the removed unit with this page. This only confirms that it is the correct unit. Also have the fault memory read out beforehand, because only that shows whether the control unit is defective or a plug or cable is the cause.
For the same vehicles, we also repair control units with the part numbers 1J0 909 603, 1J0 909 603 AH, 1J0 909 603 BL, 1J0 909 603 E, 6N0 909 603, 6N0 909 603 S.
How does the repair of the 6N0 909 603 AQ work?
First read out the fault memory and include the log, then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the unit well packed. Airbag24 checks it on the test bench, replaces defective components, erases stored crash data and carries out a function test; processing usually takes 3–4 working days.
The order of steps is a safety measure: the control unit is only removed once the fault memory has been read out and the battery disconnected.
Before sending, it is worth checking the unit and repair order for completeness. After processing, your own unit is sent back. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.
How does the control unit 6N0 909 603 AQ get to Airbag24?
You send the control unit as a parcel or book a UPS collection for an extra charge. After repair, Airbag24 returns it to you by UPS.
Place the printed repair order in the parcel and pack the unit shock-proof.
Shipping & repair from Germany
Airbag24 repairs your component in Berlin — usually within 3–4 working days.
Standard shipping within Germany is free; we normally return your part by UPS.
You pay for and insure the inbound shipment to us. On explicit request we ship by express — the extra cost is borne by the customer.
If you withdraw from the contract, you bear the cost of returning the item.
Based on 281 reviews
What our customers say
„Top!!“
„Top“
„Top!“
„Absolutely top, from the order to the shipping. Had a bit of problems because of the connector. Was solved immediately via WhatsApp. Thanks“
Automatically translated · Original: German
„Airbag control unit received today and refitted on an Opel GT to force the passenger airbag. No more fault. Shipping, repair and return fast. Perfect 😃“
Automatically translated · Original: French
„Uncomplicated, fast and easy processing. Was constantly informed about the current status. As stated, repair was not necessary, since error readout and reset was possible. Great service and absolutely trustworthy.“
Automatically translated · Original: German
„I am very satisfied with the service performed by Airbag 24, they did it quickly, solidly and at a very good price. I warmly recommend it.!!!!👌“
Automatically translated · Original: Polish
„Very good service, didn't even take as long as predicted, price/performance excellent. Very detailed installation instructions. Highly recommended.“
Automatically translated · Original: German
„One of the best companies when it comes to service and expertise of Germany.“
Automatically translated · Original: German
„All good, again and again“
Automatically translated · Original: German
„The repair of the AIRBAG control unit was carried out quickly“
Automatically translated · Original: German
„Very fast competent reliable Also cheaper than competitors! Consultation via Mail quick extremely competent and reliable“
Automatically translated · Original: German
„Top!!“



