
Airbag control unit with part number 77960-TP6-X111-M2
Also written as: 77960TP6X111M2
Control unit repairs for part number 77960-TP6-X111-M2 in our shop:

Your vehicle isn't listed?
Part number “77960-TP6-X111-M2” isn't linked to every vehicle in our database – we can usually repair it anyway. Select your vehicle and we'll show you the matching repair:
What does the airbag control unit 77960-TP6-X111-M2 do?
In the vehicle, the airbag control unit 77960-TP6-X111-M2 is responsible for the restraint system (SRS) of Honda. It processes the signals from the crash sensors and decides in an accident whether airbags and seatbelt pretensioners are triggered.
The evaluation happens within milliseconds. The unit also monitors the condition of the system continuously and shows faults via the airbag warning light.
After an accident, the control unit stores crash data and then locks itself. Only a repair lifts the lock.
Why does the control unit 77960-TP6-X111-M2 fail?
The most common cause is crash data stored after an accident, even if no airbag was triggered. Added to this are ageing electronics, cold solder joints, moisture and corrosion on plug connectors, and voltage spikes.
Stored crash data remains in the unit, and an ordinary diagnostic tool cannot remove it. Airbag24 erases it during the repair.
Electronic components wear out over the years, and solder joints can go cold or break. These changes are also possible without an accident.
Moisture and corrosion attack the plug connectors. Voltage spikes, for example from a weak battery or a jump start, can place additional strain on the electronics.
How can you tell that the 77960-TP6-X111-M2 is defective?
A fault is indicated by the airbag warning light in the instrument cluster, which stays on permanently or intermittently. Added to this are an error message, a diagnostic tool without connection, and a fault memory that cannot be cleared.
- The airbag warning light stays on continuously.
- The light only appears from time to time.
- An error message is shown in the instrument cluster.
- A diagnostic tool does not find the control unit.
- The fault memory cannot be cleared.
If these signs apply, airbags and seatbelt pretensioners may not trigger in an emergency.
The warning light shows the fault immediately. You should therefore have the vehicle checked promptly.
Which vehicles is the 77960-TP6-X111-M2 fitted in?
The 77960-TP6-X111-M2 is fitted in these vehicles: Honda Crosstour 1st generation (2010-2015).
The affected vehicles are listed in the following list.
- Honda Crosstour 1st generation (2010-2015)
Compare the part number on the unit with this page. This way you know that you have the right control unit in front of you.
Have the fault memory read out before removal. Only the result shows whether the control unit is defective or whether a plug or cable is the cause.
For the same vehicles, we also repair control units with the part numbers 77960-TP6-A111-M2, 77960-TP6-A120-M2, 77960-TP6-A211-M2, 77960-TP6-A220-M2, 77960-TP6-X011-M2, 77960-TP6-X020-M1.
How does the repair of the 77960-TP6-X111-M2 work?
Have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the unit in well packed. Airbag24 checks and repairs the unit, erases the crash data and tests it.
This sequence is prescribed for safety reasons. The battery must be disconnected before removal.
At Airbag24, the unit goes onto the test bench. Defective components are repaired and the crash data is removed. A function test completes the work, and then your own unit is returned to you.
Processing at Airbag24 usually takes 3–4 working days. This period refers only to the work in-house.
Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.
How does the control unit 77960-TP6-X111-M2 get to Airbag24?
You send the control unit 77960-TP6-X111-M2 to Airbag24 as a parcel or book a UPS collection. After the repair, UPS brings the unit back to you.
The printed repair order belongs in the parcel. Pack the control unit shock-proof.
Shipping & repair from Germany
Airbag24 repairs your component in Berlin — usually within 3–4 working days.
Standard shipping within Germany is free; we normally return your part by UPS.
You pay for and insure the inbound shipment to us. On explicit request we ship by express — the extra cost is borne by the customer.
If you withdraw from the contract, you bear the cost of returning the item.
Based on 280 reviews
What our customers say
„Top!!“
„Top“
„Top!“
„Airbag control unit received today and refitted on an Opel GT to force the passenger airbag. No more fault. Shipping, repair and return fast. Perfect 😃“
Automatically translated · Original: French
„Uncomplicated, fast and easy processing. Was constantly informed about the current status. As stated, repair was not necessary, since error readout and reset was possible. Great service and absolutely trustworthy.“
Automatically translated · Original: German
„I am very satisfied with the service performed by Airbag 24, they did it quickly, solidly and at a very good price. I warmly recommend it.!!!!👌“
Automatically translated · Original: Polish
„Very good service, didn't even take as long as predicted, price/performance excellent. Very detailed installation instructions. Highly recommended.“
Automatically translated · Original: German
„One of the best companies when it comes to service and expertise of Germany.“
Automatically translated · Original: German
„All good, again and again“
Automatically translated · Original: German
„The repair of the AIRBAG control unit was carried out quickly“
Automatically translated · Original: German
„Very fast competent reliable Also cheaper than competitors! Consultation via Mail quick extremely competent and reliable“
Automatically translated · Original: German
„I registered my airbag control unit online, got a repair order, sent in the device and after 2 days got a response, device ready. Top.. I would have just wished for a note about the defect of the device. For example cold…“
Automatically translated · Original: German
„Top!!“



