Airbag control unit with part number 80A 959 655 G

What is the function of the Airbag Control Unit 80A 959 655 G?

The airbag control unit with part number 80A 959 655 G is the central control module for the passive safety system in vehicles such as the Audi Q5 FY and FYB Sportback. It processes data from acceleration and crash sensors to precisely and rapidly deploy airbags and seatbelt pretensioners in the event of a collision.

As the “brain” of the restraint system, this module continuously monitors all connected components, including all airbags (driver, passenger, side, and curtain airbags), seatbelt pretensioners, seat occupancy detection, and external impact sensors mounted at the front and sides of the vehicle.

Its primary task is to interpret signals from the sensors and determine whether a collision is severe enough to require activation of the restraint devices. This safety-critical function makes a properly functioning control unit essential for occupant protection.

Why does the control unit 80A 959 655 G fail?

The most common causes of failure for the control unit 80A 959 655 G are internal electronic defects on the circuit board. These often result in complete communication loss with diagnostic tools or specific error codes such as B2000. Stored crash data after an accident can also prevent the unit from functioning.

A typical symptom is the failure of individual electronic components. Defective microprocessors, capacitors, or internal sensors can disable the entire module. Such hardware failures frequently cause the airbag warning light to remain illuminated.

In particular, for the Audi Q5/SQ5 FY model series from 2017 onward, error code B2000 (control unit defective) is a well-known issue. This error indicates an internal data or hardware conflict that requires specialized repair or a reset to restore proper operation.

Other potential causes include external factors. Moisture ingress can lead to corrosion on the circuit board and short circuits. Additionally, after an airbag deployment, the control unit may become locked because crash data remains permanently stored, preventing reuse without professional servicing.

How do you recognize a faulty Airbag Control Unit 80A 959 655 G?

The clearest signs of a defect in the control unit 80A 959 655 G are a persistently illuminated airbag warning light on the instrument cluster and a lack of communication with the module. Diagnostic tools like VCDS or OBD scanners cannot establish a connection to the control unit or read errors such as B2000.

The primary indicator is the active airbag warning light on the dashboard, which fails to turn off after starting the vehicle—signaling a persistent, safety‑relevant system fault.

Another clear sign is when the workshop’s diagnostic tool cannot access the airbag control unit. The module does not respond to requests, making precise fault diagnosis via the OBD port impossible and usually pointing to an internal defect within the control unit itself.

In which vehicles is the control unit 80A 959 655 G installed?

The airbag control unit with part number 80A 959 655 G is primarily installed in models based on the Audi Q5 platform, including the Audi Q5 FY series and the Q5 FYB Sportback. Compatible variants can also be found in these and related models, such as the SQ5.

At Airbag24, we repair the airbag control unit 80A 959 655 G and related variants for the following models:

Audi: Q5 FY (2017–2024), Q5 FY Facelift (2020–2024), Q5 FYB Sportback (2020–2024), as well as the Audi SQ5 FY.

Since there are several variants of this control unit, it is essential to verify the exact part number on the removed component. Commonly used and compatible part numbers for this vehicle generation include 80A 959 655 N, 80A 959 655 R, 80A 959 655 AE, along with the cross‑manufacturer reference A2C96376516.

How does the repair of the control unit 80A 959 655 G proceed?

Professional repair at Airbag24 includes a detailed analysis, component‑level restoration, and a final functional test. Defective electronic components are replaced, and stored crash data or errors such as B2000 are reset. Each repair comes with a 12‑month warranty.

After sending the removed control unit to Airbag24, the standardized repair process begins. Ideally, a diagnostic printout showing the extracted error codes should accompany the package to help technicians perform an initial assessment.

In the first step, an incoming inspection takes place, during which technicians trace the fault and pinpoint the exact cause on the circuit board using specialized measuring and testing equipment to identify defective components such as microprocessors or capacitors.

Subsequently, the defective components are professionally desoldered and replaced with new, high-quality parts. If the fault was caused by stored crash data or error code B2000, the control unit’s internal memory is professionally reset.

Following repair, the control unit undergoes a comprehensive functional test on the test bench. This ensures that communication functions flawlessly once again and that all safety‑critical features are fully restored, just as with a brand‑new unit.

What shipping options does Airbag24 offer?

Airbag24 provides flexible, customer‑friendly shipping options. For outbound shipments, you can either send your package yourself at no cost or arrange a convenient UPS pickup. Return shipping is free via UPS Standard, with Express and Cash-on-Delivery options also available.

You have two ways to ship your defective control unit to us: either send it free of charge by post or through a carrier of your choice, or schedule a convenient UPS pickup from a location of your choosing—such as your workshop or your home.

After successful repair, several return‑shipping options are available. UPS Standard shipping is completely free for you. If you need faster delivery, you can opt for UPS Express shipping.

Both Standard and Express shipping can, upon request, be combined with Cash-on-Delivery. Alternatively, you may choose to pick up the repaired control unit in person directly from our premises.