Airbag control unit with part number 89170-0DB60

What does the airbag control unit 89170-0DB60 do?

The airbag control unit 89170-0DB60 is the central control of the SRS in Toyota vehicles. It evaluates the signals from the crash sensors and decides within milliseconds in an accident about the triggering of airbags and seatbelt pretensioners.

While driving it checks the restraint system continuously and reports faults.

An accident causes crash data to remain in memory and the unit to be locked.

Why does the control unit 89170-0DB60 fail?

Stored crash data is the most common cause of control unit 89170-0DB60, that is, data from an accident in which no airbag was triggered. Further causes are aging electronics, cold solder joints, moisture and corrosion on connectors, and voltage spikes, for example with a weak battery or jump start.

An ordinary diagnostic tool does not remove this data.

Which cause applies in the individual case only becomes clear through examination of the unit.

How can you tell that the 89170-0DB60 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently. In addition there is a fault message in the instrument cluster, a missing connection of the diagnostic tool to the control unit and a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then not deploy.

The airbag warning light indicates a defect. Have the system checked promptly.

Even if the light comes on only intermittently, it is a sign of a fault.

Which vehicles is the 89170-0DB60 fitted in?

The 89170-0DB60 is fitted in these Toyota vehicles: Toyota Yaris XP130 2nd Facelift (2017-2020), XP130 (2010-2014) and XP130 1st Facelift (2014-2017).

The vehicles are listed individually in the list below.

• Toyota Yaris XP130 2nd Facelift (2017-2020)
• Toyota Yaris XP130 (2010-2014)
• Toyota Yaris XP130 1st Facelift (2014-2017)

You should compare the number on the label of the removed unit with this page, so you know exactly which unit you have. Have the fault memory read out beforehand, because the result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 2310009950, 89170-0D300, 89170-0D320, 89170-0D590, 89170-0D600, 89170-0D620.

How does the repair of the 89170-0DB60 work?

At Airbag24, checking, repair and testing usually take 3–4 working days. First have the fault memory read out and attach the log, then disconnect the battery and remove the control unit 89170-0DB60.

Airbag24 checks the unit on the test bench, replaces defective components, deletes stored crash data and carries out a function test. Afterwards the own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 89170-0DB60 get to Airbag24?

Sending in as a parcel is possible, as is a UPS collection for an extra charge. Airbag24 returns the unit to you by UPS after the repair.

The printed repair order is enclosed in the parcel, and the unit is packed shock-proof.