Airbag control unit with part number 89170-48240

What is the function of the airbag control unit 89170-48240?

The airbag control unit with part number 89170-48240 is the central control module for the Supplemental Restraint System (SRS) in the Toyota Highlander XU40. It processes data from acceleration and pressure sensors within milliseconds to precisely deploy appropriate restraint systems—such as driver, passenger, side, or curtain airbags—as well as seatbelt pretensioners—in the event of a crash.

As an original OEM component (also known as the Air Bag Sensor Assembly), it serves as the brain of the passive safety system. It continuously analyzes sensor data transmitted by the vehicle—particularly deceleration values and impact angles—to reliably detect a crash situation.

Based on this analysis, the module determines which airbags and seatbelt pretensioners need to be activated to provide optimal occupant protection. The internal electronics, in this model a Denso variant equipped with a 93C66 EEPROM chip, are responsible for storing system data and, in the event of a crash, also crash-related data.

Why does the control unit 89170-48240 fail?

The most common cause of failure for the control unit 89170-48240 is the storage of crash data after an accident, which permanently locks the module. Additional faults arise from moisture ingress, damaged wiring, faulty connectors, or defects in internal hardware components such as the EEPROM memory chip.

After airbags or seatbelt pretensioners have deployed, the control unit writes a so‑called “hard code” into its internal memory (EEPROM 93C66). This entry locks the system and prevents reactivation until the data is professionally erased.

Besides crash‑induced lockouts, purely electronic or physical failures can also occur. These include damage caused by moisture penetration, broken wires in the SRS system, or corroded connectors that disrupt communication. This control unit is often compatible with the alternative part number 89170-48090 and carries the reference number 150300 0734.

Typical symptoms of a defect in 89170-48240

A defective airbag control unit 89170-48240 primarily manifests as a constantly illuminated airbag warning light on the instrument panel. Communication with diagnostic equipment is frequently lost, making it impossible to read out fault codes. Following a crash, the entire airbag system becomes locked and non‑functional.

The clearest indication is the persistently lit SRS warning light. It does not extinguish after starting the engine, signaling a serious, stored error within the system.

Another critical symptom is complete loss of communication. Workshops can no longer access the module with their diagnostic tools to retrieve fault codes. In the fault memory of other control units, an entry such as “No communication with airbag control unit” may appear.

Specific fault codes indicating a side‑impact sensor malfunction or a general airbag failure can also originate directly from the control unit itself, even when external sensors remain intact.

In which vehicles is 89170-48240 installed?

The airbag control unit with part number 89170-48240 is an original OEM component mainly used in the second-generation Toyota Highlander (XU40, model years 2007–2013). At Airbag24, this module is also successfully refurbished for the sister model, the Toyota Kluger (GSU40).

Specifically, this control unit manages the passive safety systems in the following models:

Toyota: Highlander (XU40, 2007–2013), Kluger (GSU40)

What are the advantages of repair over replacement?

Repairing the control unit 89170-48240 offers significant cost savings compared to purchasing a new unit, which manufacturers list at between $320 and $630. A repaired unit is a plug-and-play solution that requires no extensive reprogramming of the vehicle. Additionally, a 12-month warranty covers the work performed.

By opting for repair, you save not only money but also time, as installing the refurbished original part is straightforward. It maintains the vehicle’s original configuration, eliminating costly and time‑consuming programming work at the workshop.

Moreover, repair represents a sustainable solution that reduces electronic waste and conserves valuable resources. You get your own vehicle‑specific control unit back, fully functional and ready to use.

How is the control unit 89170-48240 professionally repaired?

Following submission to Airbag24, the repair process adheres to a strict, professional protocol. First, an initial inspection is conducted, and the fault memory is read out. The core of the repair involves erasing stored crash data and hard codes directly from the EEPROM memory chip (type 93C66) to reset the module.

The repair process aims to restore the module to its factory‑condition. Specialized technicians use diagnostic tools to access the internal memory and remove the crash‑induced immobilization.

Subsequently, the hardware is inspected for additional defects, such as cold solder joints or damaged components. Following successful refurbishment and a final functional test, the control unit is fully operational again. We provide a 12‑month warranty on all repairs.

What shipping options does Airbag24 offer?

You can either send your control unit to Airbag24 yourself at no cost, or arrange a convenient UPS pickup from your preferred location. Returns are equally flexible: you can choose free standard UPS shipping or, for an additional fee, expedited UPS Express delivery. Both options are also available with cash on delivery; alternatively, you may opt for self‑pickup.

For the outbound shipment, you have two choices: either ship the removed control unit directly to us, or arrange a hassle‑free UPS pickup right at your premises, in your workshop, or even at home.

After repair, we typically return the device via free standard UPS shipping. If faster delivery is required, UPS Express is available. For maximum flexibility, both shipping methods can be combined with cash on delivery. Personal pickup at our workshop is also an option.