Airbag control unit with part number 89170-87410

What is the function of the airbag control unit 89170-87410?

The airbag control unit with part number 89170-87410 is a central control module for occupant protection systems in various Daihatsu models. It processes signals from crash sensors to precisely and timely deploy airbags, seatbelt pretensioners, and other pyrotechnic components in the event of a collision. Its primary role is to monitor and manage the entire restraint system.

As an original OEM component from Daihatsu, this control unit serves as the brain of the airbag system. It continuously communicates with acceleration and pressure sensors distributed throughout the vehicle. Upon impact, its internal electronics analyze incoming data within milliseconds and determine which restraint systems need to be activated to provide optimal occupant protection. This device is critical for vehicle safety.

Technically related or alternative part numbers for this control unit include 89170-97403 and 89170-97410. Proper functionality is essential, as failure can disable the entire safety system.

Why does the control unit 89170-87410 fail?

The most common causes of failure for the control unit 89170-87410 are internal hardware defects on the circuit board and the storage of crash data after an accident. Often, defective electronic components lead to complete system failure, particularly when the unit heats up. Stored crash data permanently locks the control unit’s functionality until it is professionally erased.

A key reason for failure is the retention of crash data. After deploying components such as the driver airbag, knee airbag, passenger airbag, or seatbelt pretensioners, the control unit self‑locks for safety reasons. It then becomes non‑functional and displays a persistent error message, even if the hardware itself remains intact.

In addition, failures of individual electronic components are a typical cause. These can result in intermittent or permanent malfunctions. A well‑known symptom is complete system failure under heat, indicating thermal issues with solder joints or specific components like capacitors or processors.

Internal errors recorded as sensor faults (e.g., crash sensor, seat airbag) in the fault memory may also originate directly within the control unit and require component‑level repair.

How do you recognize a defect in the airbag control unit 89170-87410?

The clearest sign of a defect is the airbag warning light that remains constantly illuminated on the instrument panel. Other indicators include complete system failure at elevated ambient temperatures—often affecting other vehicle functions like the clock—as well as the inability to communicate with the control unit via a diagnostic tool.

The primary warning signal is the airbag warning light. It stays on continuously after engine start-up or illuminates for an unusually long time—such as 30 seconds—before remaining lit. This indicates a critical system error that requires immediate inspection.

Another clear indication is when a workshop using a diagnostic tool cannot establish communication with the airbag control unit. The unit no longer responds to queries, making fault diagnosis impossible and often pointing to a severe internal defect.

Particularly specific to this component is failure under heat. If the control unit ceases functioning after a certain operating period or during high outside temperatures, this strongly suggests a thermal issue within the internal electronics.

In which vehicles is the control unit 89170-87410 installed?

The Daihatsu OEM control unit 89170-87410 is used in a range of the brand’s models, including the Daihatsu Terios, Boon, Move, and Esse across various series. At Airbag24, we offer professional repairs for all vehicles equipped with this control unit.

At Airbag24, we repair the control unit with part number 89170-87410 for the following Daihatsu models:

Daihatsu Terios J100 (1997–2006) Daihatsu Boon M600 (2010–2016) Daihatsu Boon M700 (2016–2023) Daihatsu Move L150 Daihatsu Esse L245 Daihatsu Move Latte L550 Daihatsu Move Conte L575 Daihatsu Move Conte L585

How is the repair of the control unit 89170-87410 carried out?

The repair process begins with the proper removal of the control unit from the vehicle and its shipment to Airbag24. Our technicians perform a precise diagnosis, fix the defect at the component level, and erase stored crash data. Following a final functional test, the unit is returned with a 12‑month warranty.

First, the defective control unit must be removed from the vehicle. Then, pack it securely for transport and send it to Airbag24 along with the completed repair form.

Upon receipt of the unit, our experienced technicians perform a thorough analysis using state-of-the-art diagnostic equipment to identify the exact cause of the fault. Repairs are carried out at the component level, meaning only the faulty parts on the circuit board are replaced.

A crucial step is erasing any stored crash data. This unlocks the control unit, restoring it to full operational readiness. Finally, the repaired unit undergoes a comprehensive functional test to ensure all safety‑critical systems are functioning perfectly. We provide a 12‑month warranty on every repair.

What shipping options does Airbag24 offer?

For sending your unit to us, you can either drop it off yourself free of charge or arrange a convenient UPS pickup from your preferred location. For returns, Airbag24 offers free standard UPS shipping as well as faster express options, including cash-on-delivery. Self‑pickup is also available.

For sending your unit to us, you have two choices: you can mail it directly to us or use the UPS pickup service, which will collect the package right from your doorstep.

The following options are available for returning your repaired unit:

Free standard UPS shipping (delivery in 1–3 business days) UPS express shipping (delivery in 1–2 business days) UPS standard shipping with cash-on-delivery (1–3 business days) UPS express shipping with cash-on-delivery (1–2 business days) Self‑pickup at our workshop