Airbag control unit with part number 89170-BZ350

What is the function of the airbag control unit 89170-BZ350?

The airbag control unit 89170-BZ350 is the central control module of the passive safety system. It monitors vehicle sensors and is responsible for activating the airbags and seatbelt pretensioners in the event of a crash to protect occupants. Therefore, its proper functioning is critical for safety.

As a core component of the restraint system, this module continuously receives and processes data from various crash sensors distributed throughout the vehicle. These sensors measure critical acceleration and deceleration values in real time.

When a collision exceeding predefined thresholds is detected, the control unit sends the necessary ignition signals to the corresponding airbag modules and pyrotechnic seatbelt pretensioners within milliseconds, ensuring maximum protection for vehicle occupants.

Why does the control unit 89170-BZ350 fail?

A failure of the control unit 89170-BZ350 is often caused by stored crash data following a collision, which the system locks out for safety reasons. Additionally, internal hardware defects can lead to complete communication loss or display sensor errors, even without a prior accident.

The most common cause of malfunction is the storage of so‑called crash data. After the airbags or seatbelt pretensioners are deployed, a permanent entry is recorded in the control unit’s internal memory, preventing further use. This entry must be professionally reset to restore full functionality.

Furthermore, electronic components inside the control unit may also fail. Such defects often manifest as the unit becoming inaccessible to diagnostic tools, despite no collision having occurred. Causes can include aging or moisture damage.

How do you recognize a defect in the 89170-BZ350?

A defective airbag control unit 89170-BZ350 is primarily indicated by the permanently illuminated airbag warning light on the instrument panel. Other clear signs include the inability to access the control unit with a diagnostic tool or specific error messages upon vehicle startup.

The most noticeable symptom is the persistently lit airbag warning lamp on the dashboard. It fails to extinguish after engine start-up, signaling a serious fault in the restraint system that requires immediate inspection.

Another critical indication occurs when the workshop cannot establish communication with the airbag control unit using a diagnostic device. The fault memory frequently stores an error code stating “No communication with airbag control unit.”

In some cases, communication is possible, yet implausible errors appear. For example, a reported “side‑impact sensor error” despite the sensor itself being functional. Likewise, the inability to clear the airbag warning light after a repair attempt points to an internal defect in the control unit.

In which models is the 89170-BZ350 installed?

The airbag control unit with part number 89170-BZ350 is specifically designed for vehicles manufactured by Daihatsu. At Airbag24, we have successfully repaired and matched this control unit to the Daihatsu Be‑go J200 series produced between 2006 and 2016.

Our technical expertise focuses specifically on the following vehicle model where this component is standard equipment:

Daihatsu Be‑go (J200 series), model years 2006–2016

How is the 89170-BZ350 repaired?

Repair at Airbag24 centers on eliminating the root cause of the issue, such as clearing stored crash data or restoring communication electronics. After removal and shipment, our technicians inspect, repair, and thoroughly test the control unit. You receive a 12‑month warranty on the completed repair.

First, the control unit should be professionally removed from the vehicle. Then, pack it securely for transport to protect it from further damage during shipping, and send it to Airbag24.

Upon arrival at our specialized workshop, a comprehensive analysis is performed. The primary focus is on erasing crash data stored in the fault memory or repairing hardware defects that prevent communication. Defective components are replaced with high‑quality parts.

Subsequently, each repaired control unit undergoes a functional test to ensure proper operation. Following a successful test, the unit is prepared for return shipment.

What shipping options are available?

To ensure a secure process, Airbag24 offers flexible shipping options. You can send your defective control unit free of charge yourself or arrange a convenient UPS pickup. For the return shipment, you have access to free standard and paid express options, including cash-on-delivery.

For the outbound shipment, you can send the package to us at your own expense or arrange for a UPS pickup at your preferred location. Alternatively, you can also drop off the item in person at our workshop.

For returning the repaired control unit, we offer the following options:

The UPS standard shipping is free of charge. Alternatively, you can choose the faster UPS express service. Both shipping methods are also available with cash-on-delivery. In addition, you can pick up the device in person from us once the repair is complete.