Airbag control unit with part number 8917005030

What is the function of the airbag control unit 8917005030?

The airbag control unit with part number 8917005030 is the central control module of the occupant safety system (SRS) for the Toyota Avensis T220. It processes data from crash sensors and ensures that, in the event of a collision, the airbags and seatbelt pretensioners are deployed precisely and promptly.

As an original OEM component, it is specifically designed for the vehicle architecture of the Toyota Avensis T220 series—both the pre-facelift model (1997–2000) and the facelift model (2000–2003). Its primary task is to continuously monitor all safety‑related components of the airbag system.

In case of a malfunction or after a crash, the control unit deactivates the entire system for safety reasons, indicated by the SRS warning light. A professional repair is often the most cost-effective solution to restore full functionality of the safety system.

Why does the airbag control unit 8917005030 fail?

The most common cause of failure for control unit 8917005030 is stored crash data. Even minor collisions without airbag deployment—such as rear-end impacts—or faults in the seatbelt pretensioner system can trigger internal locking of the unit. Other causes include internal hardware defects leading to communication loss or complete system failure.

Stored crash data is a manufacturer‑specified safety feature. After a collision, an irreversible fault entry is recorded in the control unit’s memory, preventing further use without professional inspection and reset. Specialized repair services can safely erase this data and restore full functionality.

Besides data locks, classic electronic failures also occur. These include defective components on the circuit board, which may result in total failure—often temperature‑dependent—or communication issues with diagnostic tools. A typical error code in such cases is B1100, indicating an internal fault within the control unit.

Technical note: According to technical sources, the control unit with part number 8917005090 is functionally identical and can be used as a replacement for the same vehicle model. Defects manifest in similar ways across both variants.

How do you recognize a defect in control unit 8917005030?

The clearest symptom of a defect in control unit 8917005030 is a permanently illuminated or flashing SRS warning light on the instrument cluster. Often, the control unit becomes unresponsive to diagnostic equipment (communication loss), or a specific error code such as B1100 (internal fault) is logged.

The active airbag warning light is a critical safety alert. It indicates that the entire occupant safety system—including all airbags and seatbelt pretensioners—is deactivated. Consequently, no protection is provided in the event of a crash. Immediate inspection at a specialized workshop is essential.

Another clear sign is the absence of communication. When a workshop attempts to read the fault memory using diagnostic equipment, no response is received from the airbag control unit, pointing to a severe internal hardware defect.

Additionally, unusual accompanying symptoms may appear, such as a non‑functioning clock, complete device failure when heated, or sporadic error messages related to crash sensors or seat airbags—even though these components remain intact.

In which vehicles is the airbag control unit 8917005030 installed?

The airbag control unit with part number 8917005030 is specifically designed for the Toyota Avensis T220 model series. It is used in both the first generation and the subsequent facelift model, covering a production period from 1997 to 2003.

At Airbag24, we repair part number 8917005030 and its interchangeable counterpart, 8917005090, for the following Toyota models:

Toyota Avensis T220 (model years 1997–2000) Toyota Avensis T220 Facelift (model years 2000–2003)

How does repair work at Airbag24?

Repair of control unit 8917005030 at Airbag24 follows a systematic and transparent process. Upon receipt of the unit, our technicians conduct a thorough analysis to pinpoint the root cause of the issue. This is followed by professional restoration through component replacement or clearing stored crash data, culminating in a final test. We provide a 12‑month warranty on every repair.

First, an incoming inspection is performed, during which our mechatronics experts verify the customer‑reported fault using state-of-the-art diagnostic technology. This ensures that the underlying cause is either a hardware defect, a memory error, or stored crash data.

Based on the diagnosis, the actual repair is carried out. For hardware defects, the faulty electronic components on the circuit board are precisely replaced. If crash data is the cause, it is safely and completely erased from the control unit’s memory using specialized programming tools.

After refurbishment, each control unit undergoes a comprehensive functional test. This ensures that the device operates flawlessly at 100% and correctly controls all systems. Only after passing this test is the unit approved for return shipment.

What shipping options does Airbag24 offer?

Airbag24 provides flexible and secure shipping solutions. You can send the defective control unit free of charge or use our convenient UPS pickup service. For return shipments, you have the choice between free UPS Standard shipping and faster UPS Express shipping—both available with cash-on-delivery.

For outbound shipping, you can either send the package to us yourself or arrange for UPS to pick it up at your preferred location. Alternatively, you can drop off the device in person at our facility by appointment.

For return shipments, you can choose: UPS Standard shipping is free of charge. If you need it faster, we offer UPS Express shipping. Both options can also be combined with cash-on-delivery. Of course, you can also pick up your repaired unit in person at our premises.