Airbag control unit with part number 8C3414B321AB
Control unit repairs for part number 8C3414B321AB in our shop:
Your vehicle isn't listed?
Part number “8C3414B321AB” isn't linked to every vehicle in our database – we can usually repair it anyway. Select your vehicle and we'll show you the matching repair:
What does the airbag control unit 8C3414B321AB do?
The airbag control unit 8C3414B321AB is the central control unit of the restraint system (SRS) for Ford. It evaluates the signals from the crash sensors and, in an accident, triggers airbags and seatbelt pretensioners within milliseconds.
During operation it checks the system continuously; faults appear via the airbag warning light.
After an accident it secures crash data and locks itself.
Why does the control unit 8C3414B321AB fail?
Stored crash data is the most common cause, even if no airbag was triggered. A normal diagnostic tool cannot remove it. Other causes are aged electronic components, cold solder joints, moisture at plug connections with corrosion, and voltage spikes.
Airbag24 removes the crash data during the repair.
Among the other causes are aging electronics, poorly soldered spots, and wetness and rust at plug connections. Voltage spikes, for example when the battery is weakening, can also harm the unit.
How can you tell that the 8C3414B321AB is defective?
A defect shows itself through the airbag warning light, which stays on or lights up repeatedly, through a message in the instrument cluster, through a missing connection to the diagnostic tool, or through a fault memory that cannot be cleared. In that case the airbags and seatbelt pretensioners may not trigger in an emergency.
The light is therefore a warning signal that must be taken seriously.
A failure of communication with the diagnostic tool does not have to originate in the control unit. Plugs, cables and the power supply are equally possible; which case applies is clarified only by the readout.
Which vehicles is the 8C3414B321AB fitted in?
The control unit 8C3414B321AB is fitted in these vehicles: Ford F-Series Super Duty 2 (2008-2010). The assignment depends on the part number, not on the condition of the unit.
Which models belong to it is shown in the overview here.
- Ford F-Series Super Duty 2 (2008-2010)
A comparison of the part number on the label with this page ensures that you have removed the right unit. Have the fault memory read out beforehand as well. Only this log shows whether the control unit itself is defective or whether a plug or cable is the cause.
How does the repair of the 8C3414B321AB work?
Before removal you have the fault memory read out and attach the log; then disconnect the battery. Only then remove the control unit 8C3414B321AB, create a repair order online and pack the unit well. Processing at Airbag24 usually takes 3–4 working days.
The requirement is set for safety reasons. Without a disconnected battery, removal would not be harmless.
At Airbag24 there follow inspection, repair of defective components, deletion of the crash data and a function test. Afterwards your own unit is sent back.
Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.
How does the control unit 8C3414B321AB get to Airbag24?
Optionally you send the unit as a parcel, or you book a UPS collection for an extra charge. After the repair the unit comes back to you by UPS.
Place the printed repair order in the parcel, and the control unit must be packed shock-proof.
Shipping & repair from Germany
Airbag24 repairs your component in Berlin — usually within 3–4 working days.
Standard shipping within Germany is free; we normally return your part by UPS.
You pay for and insure the inbound shipment to us. On explicit request we ship by express — the extra cost is borne by the customer.
If you withdraw from the contract, you bear the cost of returning the item.
4.8
Based on 241 reviews
What our customers say
„Ok.“
Zsolt Szabó2 days ago„Works like a charm!“
Leoly3 weeks ago„VAG airbag control unit with error B2000 00 reliably repaired. Price very high in comparison, but everything worked out. No exact protocol of what was carried out, probably just newly flashed“
Automatically translated · Original: German
Tokeh Tokehtoday„A great shop, even when there are sometimes problems. There are quick responses and very good help. I can only recommend the shop. Thank you very much“
Automatically translated · Original: German
Sven Wegener2 days ago„Problem solved :-)“
Automatically translated · Original: German
Fa D'A2 days ago„Everything went well“
Automatically translated · Original: German
Mehdi Fattahi2 days ago„Everything works great“
Automatically translated · Original: German
Wolfgang Katenz3 days ago„Ultra satisfied with this company. My computer was repaired quickly and works perfectly again! Communication is exemplary (emails, SMS...). Very serious company, thank you!“
Automatically translated · Original: French
Sophie Hoguet3 days ago„Uncomplicated, fast, correct.“
Automatically translated · Original: German
Karl-Josef Backes3 days ago„Airbag control unit sent: the handling of it was immediate and very serious. The returned control unit was fitted without any problem and works perfectly. Very satisfied!“
Automatically translated · Original: French
Jean Philippe Amouroux4 days ago„Airbag control unit Fiat 500 was broken. Hard to believe but they can really repair it! Recommendation!!“
Automatically translated · Original: German
Christian Maegerleinlast week„From the first phone call, the order processing, to the shipping, everything was done very quickly and professionally. Now I still have to send the repaired unit to the Swedish workshop and then hopefully the Honda can f…“
Automatically translated · Original: German
Gerd Goldammerlast week„Ok.“
Zsolt Szabó2 days ago
