Airbag control unit with part number 8R0 959 655 G

What is the function of the airbag control unit 8R0959655G?

The airbag control unit with part number 8R0959655G, manufactured by Bosch for Audi, serves as the central control unit for the occupant protection system. It processes data from acceleration and yaw rate sensors to precisely and rapidly deploy airbags and seatbelt pretensioners in the event of a crash, ensuring passenger safety.

As the brain of the passive safety system, this component continuously monitors all relevant sensors and actuators—from impact sensors in the vehicle’s front and sides to seatbelt pretensioners and individual airbag modules—ensuring that, in an emergency, the appropriate restraint systems are activated in the correct sequence and with the proper intensity.

The specific configuration of the 8R0959655G is precisely tailored to the vehicle architecture of the Audi Q5 and SQ5 from the 8R series. It is a variant of the OEM part number 8R0959655B and shares the same core functionality and critical safety role within the vehicle.

Why does the control unit 8R0959655G fail?

The most common cause of failure for the 8R0959655G control unit is the storage of crash data after an accident, which the system locks out for safety reasons. In addition, internal electronic defects in components can lead to total failure, often manifesting as a lack of communication with diagnostic tools and requiring repair.

Following a collision—even minor ones—the control unit writes an irreversible fault entry into its internal memory. This lockout, known as “crash data,” safeguards against further operation of a potentially damaged system. The unit must then be professionally reset or replaced.

Beyond accidents, purely electronic faults can also occur, including defects in memory chips, processors, or other critical components on the circuit board. Such hardware failures often result in the control unit completely ceasing to function and becoming unresponsive.

It is important to distinguish this part number from similar ones. For example, 8R0959655GZ01 belongs to a brake pressure sensor, while 8Z0959655G is installed in an Audi A2. Precise diagnosis ensures that the correct component is sent for repair.

How do you recognize a defect in the 8R0959655G?

A defective 8R0959655G control unit primarily manifests as a permanently illuminated airbag warning light on the instrument cluster. Another clear indication is that the control unit is no longer accessible via the OBD interface, and diagnostic tools cannot establish a connection, suggesting a complete internal failure.

The most obvious symptom is the red airbag warning light, which remains lit after starting the vehicle and signals a serious fault in the restraint system. In this state, the entire system—including all airbags and seatbelt pretensioners—is deactivated.

An additional key feature is the absence of communication: when a workshop attempts to read the fault memory, the diagnostic tool receives no response from the airbag control unit. This loss of communication is a typical sign of either an internal hardware defect or a lockout triggered by crash data.

In which vehicles is the 8R0959655G installed?

The airbag control unit 8R0959655G is specifically designed for models in the Audi Q5 and SQ5 series. At Airbag24, we repair this control unit for the first-generation Audi Q5 (Type 8R) as well as its sportier derivative, the Audi SQ5 (Type 8R), including their respective facelift models.

At Airbag24, repairs for this control unit are available for the following Audi models:

Audi Q5 (Type 8R, model years 2008–2012, plus facelift 2012–2017)

Audi SQ5 (Type 8R, model years 2012–2015, plus facelift 2015–2017)

How is the 8R0959655G professionally repaired?

At Airbag24, the repair of the 8R0959655G follows a certified process. Upon receipt, technicians analyze the unit at the electronic level, fix internal defects, and irrevocably erase stored crash data. Final tests restore full functionality, backed by a 12-month warranty.

The repair process begins with the proper removal of the control unit from the vehicle. It is recommended to include a diagnostic printout with the submitted unit to provide technicians with valuable initial information about any stored fault codes.

Once received at Airbag24, a comprehensive electronic diagnosis is performed. Depending on the nature of the fault, either only the stored crash data is erased, or a more thorough repair takes place, identifying and replacing defective electronic components on the circuit board.

After successful repair, the control unit is tested on specialized test benches to verify the correct functioning of all systems. Following reinstallation in the vehicle, any remaining fault codes in the overall system must be cleared using a diagnostic tool to fully activate the airbag system.

What shipping options are available?

For repairing your control unit, Airbag24 offers flexible shipping options. You can either send the package yourself at no cost or arrange a convenient UPS pickup at your preferred location. Returns are also free of charge via UPS Standard or, optionally, Express—both with cash-on-delivery payment.

For sending the unit to us, you have two choices: securely pack the removed control unit and ship it to us free of charge, or alternatively, request UPS pickup at a location and date of your choosing.

After repair, several return shipping options are available: free UPS Standard delivery, faster UPS Express delivery—both with cash-on-delivery—and in-person pickup on-site.