Airbag control unit with part number 93168337

What is the Airbag Control Unit 93168337?

The airbag control unit with part number 93168337 is the central control module for the occupant protection system in the Opel Movano B. It processes signals from the crash sensors and is responsible for deploying the airbags and seatbelt pretensioners in the event of a collision. Its proper functioning is critical to passive vehicle safety.

This control unit (ECU) continuously monitors all relevant components of the airbag system, including the various airbags, seatbelt pretensioners, and associated sensors distributed throughout the vehicle.

Under normal operating conditions, the ECU performs self-tests and indicates any malfunctions via the airbag warning light on the instrument cluster. After a crash, it stores the relevant crash data, which often results in the unit being locked out.

Why does the Airbag Control Unit 93168337 fail?

The most common causes of failure for control unit 93168337 are internal defects in electronic components such as SMD parts or capacitors, resulting from aging or moisture ingress. Another major cause is the storage of crash data after an accident, which internally locks the unit and necessitates repair.

Electronic component failures are a typical source of issues. Thermal stress over many years or moisture penetration can lead to corrosion on the circuit board, cold solder joints, or the failure of individual SMD components (e.g., transistors, resistors). This disrupts internal signal processing and causes malfunctions.

After airbags have been deployed, so‑called crash data is permanently stored in the control unit’s memory. These records lock the unit’s functionality to prevent reuse without professional diagnostics. Repair then involves safely resetting this data.

Communication errors on the CAN bus can also indicate a defect in the control unit. Common causes include corrosion on connector pins or damaged traces that prevent data exchange with other vehicle components. Note that for the Opel Movano B, part number 95517626 is also listed as an airbag control unit; therefore, carefully verifying the installed part number is essential.

How do you recognize a defect in the control unit?

A defect in the airbag control unit 93168337 typically manifests as a constantly illuminated or intermittently flashing airbag warning light on the dashboard. Another clear symptom is that the control unit becomes unreachable during workshop diagnostics—no communication can be established with the diagnostic tool.

The primary and unmistakable sign is the activated airbag warning light. This indicates an error stored in the fault memory within the restraint system, originating either directly from the control unit itself or from one of its connected components.

If a specialized workshop cannot establish communication with the airbag control unit via the diagnostic port, this strongly suggests an internal hardware defect. The unit no longer responds to requests, making detailed in‑vehicle fault analysis impossible and usually requiring removal for inspection.

In which vehicles is 93168337 installed?

The airbag control unit with part number 93168337 is specifically designed for the Opel Movano B model years 2010–2021. At Airbag24, we offer expert repair services for precisely these control units, restoring full functionality to this safety‑critical component.

At Airbag24, we repair part number 93168337 for the following model:

Opel Movano B (model years 2010–2021)

How does repair work at Airbag24?

Upon receiving your defective control unit 93168337, we conduct a thorough incoming inspection to determine the exact cause of the failure. Repair includes replacing faulty components and resetting crash data. A final functional test follows before returning the unit with a 12‑month warranty.

It is recommended to have a vehicle‑based diagnosis performed at a workshop prior to removing the control unit. This ensures that the fault truly lies within the control unit and not in the wiring or sensors.

Once received by Airbag24, the control unit undergoes a visual inspection, with serial and part numbers documented. An electrical test is then conducted on a dedicated test bench, measuring communication and internal voltages.

Depending on the nature of the fault, defective electronic components such as resistors, MOSFETs, or capacitors are professionally replaced. Stored crash data is reset to factory settings—where technically and legally permissible—to restore full functionality.

Finally, the repaired control unit is tested in a simulation to verify its proper functionality. This test ensures that all signals are processed correctly. We provide a 12-month warranty on every repair performed.

What shipping options are available?

You can send your control unit to Airbag24 free of charge or bring it in person. Alternatively, we offer convenient UPS pickup at your preferred location. For return shipping, you can choose between free UPS Standard shipping, faster UPS Express shipping, or cash-on-delivery.

For sending your defective component, you have several options. You can ship the package at your own expense or drop it off directly with us during our business hours—free of charge. For maximum convenience, you can also arrange for UPS pickup at your location.

The return shipment of the repaired control unit is standardly provided free of charge via UPS Standard shipping, which typically takes 1–3 business days. If you need it faster, you can opt for UPS Express shipping.

Both Standard and Express shipping options are also available with cash-on-delivery. Of course, you can also pick up your repaired control unit in person from our facility.