German specialistFree standard shippingFast delivery20,000+ repairs · 10,000+ reviews
Airbag24

Airbag control unit with part number 9472727E

Control unit repairs for part number 9472727E in our shop:

Your vehicle isn't listed?

Part number “9472727E” isn't linked to every vehicle in our database – we can usually repair it anyway. Select your vehicle and we'll show you the matching repair:

What is the function of the Airbag Control Unit 9472727E?

The Airbag Control Unit 9472727E is the central control module of the passive safety system (SRS) in various Volvo V70 models. Manufactured by Temic, it processes data from crash sensors and decides within milliseconds whether to deploy airbags and seatbelt pretensioners to protect occupants.

As the brain of the restraint system, this module continuously monitors all connected components—from the impact sensors in the vehicle’s front and sides to the seatbelt pretensioners and individual airbag modules—ensuring the system remains ready for operation at all times.

In the event of a collision, the control unit analyzes the severity and type of impact. Based on this information, it selectively and sequentially activates the necessary safety devices to minimize injury to passengers.

Exact compatibility with part number 9472727E or compatible OEM numbers such as 8645271 (Volvo), 0285001254 or 0 285 001 656 (Bosch), and 4045 (Temic) is essential for proper vehicle functionality. Incorrect variants can lead to incompatibility and system failures.

Why does the Control Unit 9472727E fail?

A primary cause of failure for the 9472727E control unit is the storage of crash data after an accident, which locks the system. Other common causes include age-related hardware defects, moisture damage, short circuits, or internal software errors requiring repair.

Following a collision, the module permanently stores fault records known as “crash data.” This is a safety measure designed to prevent reuse without professional diagnostics. This data record (Volvo error code 1) cannot be cleared using standard diagnostic tools and effectively disables the entire SRS system.

Electronic components naturally degrade over time. Moisture, extreme temperature fluctuations, and vibrations can lead to corrosion on the circuit board, cold solder joints, or failure of individual components such as capacitors or processors. These issues often manifest as specific error codes like SRS-0044 (internal error) or Code 2 (power supply error).

Software corruption, frequently triggered by power interruptions (e.g., during battery replacement), can also result in malfunctions. Symptoms such as a missing chassis number in memory or a program lock after errors (SRS-0107) indicate such problems.

A lit warning light should always be taken seriously. It signifies complete failure of the airbag system, results in failing the main inspection (TÜV), and poses a significant safety risk. The use of simulators or resistors is strongly discouraged, as it can be life‑threatening.

How do you recognize a defect in the Control Unit 9472727E?

The clearest sign of a defect is the persistently illuminated airbag or SRS warning light on the instrument panel. Often, the control unit can no longer be accessed by a diagnostic tool (no communication) or displays permanent, non‑erasable error codes.

The constantly lit SRS indicator light is the primary warning signal. It does not turn off after starting the engine, alerting the driver that the entire passive safety system is disabled and will not activate in the event of a crash.

Another critical symptom is the lack of communication via the OBD2 interface. If a workshop attempts to read the fault memory, they receive no response from the SRS module, indicating a severe internal malfunction.

Even when communication is possible, specific errors such as “crash data stored” or “internal control unit error” cannot be reset using standard workshop equipment, directly pointing to a defect within the module itself.

Additional, more specific indicators may include sporadically flashing warning lights, an error message related to the fuel shut-off valve, or the disappearance of the programmed vehicle identification number (FIN/VIN) from the control unit’s memory.

In which vehicles is the Control Unit 9472727E installed?

The Temic Airbag Control Unit 9472727E is primarily used in various Volvo V70 model series. At Airbag24, we offer professional repair services for this module in Volvo V70 models from 1996 to 2016, providing a cost-effective alternative to a new part.

At Airbag24, we repair the control unit with part number 9472727E for the following specific Volvo model ranges:

Volvo V70 L P80 (model years 1996–2000)

Volvo V70 S P26 (model years 2000–2007)

Volvo V70 B (model years 2007–2013)

Volvo V70 B Facelift (model years 2013–2016)

Since multiple variants of the control unit may exist, it is crucial to verify the part number printed on the device before removal and shipment to ensure compatibility.

How does the repair of control unit 9472727E proceed?

Upon sending the removed control unit to Airbag24, a professional diagnosis is performed. The repair includes erasing stored crash data, replacing defective electronic components, and restoring the software. We provide 2 years' statutory liability for defects on every completed repair.

The process at Airbag24 is designed for maximum transparency and quality. It is recommended to read out the fault memory before removal and include the printout with the package. This significantly speeds up analysis by our technicians.

Once received at our specialized workshop, the unit undergoes a thorough inspection. Our specialists can access internal memory even without OBD2 communication to reliably erase crash data and repair the software. Defective hardware components are replaced with high-quality spare parts.

Subsequently, the refurbished control unit undergoes a functional test. After reinstallation in the vehicle, only the fault memories in the entire vehicle need to be cleared to extinguish the SRS warning light. The repair is a plug-and-play solution that requires no reprogramming of the vehicle.

Shipping & repair from Germany

Airbag24 repairs your component in Berlin — usually within 3–4 working days.

Standard shipping within Germany is free; we normally return your part by UPS.

You pay for and insure the inbound shipment to us. On explicit request we ship by express — the extra cost is borne by the customer.

If you withdraw from the contract, you bear the cost of returning the item.

4.8

Based on 246 reviews

What our customers say

„Ok.“

Zsolt SzabóZsolt Szabólast week

„Works like a charm!“

LeolyLeolylast month

„Everything went perfectly, I can only recommend it.“

Automatically translated · Original: German

ka irgendwaska irgendwas3 days ago

„From the first phone call, the order processing, to the shipping everything was done very quickly and professionally. Now I still have to send the repaired unit to the Swedish workshop and then hopefully the Honda can fi…“

Automatically translated · Original: German

Gerd GoldammerGerd Goldammer3 days ago

„Airbag control unit Fiat 500 was broken. Hard to believe but they can really repair it! Recommendation!!“

Automatically translated · Original: German

Christian MaegerleinChristian Maegerlein5 days ago

„Everything worked out great! Read out fault memory, sent it in, received offer and sent in the defective control unit. Got it back repaired after 3 days, price exactly as in the offer. It can't get any better 👍“

Automatically translated · Original: German

Toni BuienToni Buien6 days ago

„Uncomplicated service. Fast and thorough. Can only recommend.“

Automatically translated · Original: German

Abdul KSAbdul KS6 days ago

„All great👍“

Automatically translated · Original: German

Edin AvdicEdin Avdiclast week

„All great, fast delivery. Thanks.“

Automatically translated · Original: German

Andrej IvanovAndrej Ivanovlast week

„100% satisfied. Everything handled very professionally and transparently. Only the return shipping took too long. This was however due to UPS and less to Aairbag24. Thank you very much“

Automatically translated · Original: German

Dennis WeDennis Welast week

„VAG airbag control unit with error B2000 00 reliably repaired. Price very high in comparison, but everything worked out. No exact protocol of what was carried out, probably just newly flashed“

Automatically translated · Original: German

Tokeh TokehTokeh Tokehlast week

„A great shop, even when there are sometimes problems. There are quick responses and very good help. I can only recommend the shop. Thank you very much“

Automatically translated · Original: German

Sven WegenerSven Wegenerlast week

„Ok.“

Zsolt SzabóZsolt Szabólast week
Airbag24

Can't find the right repair?

Not sure about the part number or fault code? Our team will check your airbag control unit and help you personally.